Themes are mixing

Hey!
I have a book with two pages inside, and each page has applied its own theme. Each theme have it's own javascript and css includes.
Themes works, the problen that i'm facing right now is that all pages (two pages) are including ALL javascripts and css from themes, no matter if each page has its own theme, it's like they are mixing and applying on all pages inside the book.
The book doesn't have applied any theme, so I don't know what's happening.
Hope people understand mi poor english and thanks in advance.

Greetings,
You need to reinstall iPhoto.
Questions:
What version of iPhoto are you running (iPhoto > About iPhoto)?
What version of the Mac OS are you running (Apple > About this Mac)?
General steps:
Remove the following files to the trash:
Macintosh HD > Library > Application Support > iPhoto (if present)
Macintosh HD > Library > Application Support > NetServices (if present)
Macintosh HD > Library > Receipts > iPhoto (anything with iPhoto in the name)
Macintosh HD > Applications > iPhoto
Insert the iLife install disk you have or the Applications disk that came with your computer and reinstall iPhoto: http://support.apple.com/kb/HT2604
Once installation is complete go to the Apple > Software update and repeat this until no additional updates are offered.
Hope that helps.

Similar Messages

Where are the daily released apps? The new page has them all mixed up. Is there any way to see only what has been released each day like it was before?

Since updating to ios6, the page with the newly released apps is gone, and replaced with something that has them all mixed together. Is there any way to search for apps released each day? I don't like the new setup, where it is categorized and you have to go through everything listed.

Thank you.Ok say for e.g.
500 video files imported in fcpx
800 clips extracted from these obviously on the timeline and joined/compounded according to their content in say 15 layers according to 15 instruments used ,so now just to see the entire usable footage ....
now one 7 minute song sequence has to be made where bits would be simultaneously taken from these 15 layers as all instruments are playing simultaneously
these shots are not more than 2 secs each according to the beat........
when I try to work with these 15 layers as well as the Final primary layer that I'm making in the same timeline my fcpx becomes slow
but when I drag individual layer to individual timelines it is fine so that is the only option
but now for every 2 second bit I have to go back to the 15 layered timeline and find one single suitable shot
So I was wondering is there a way to be able to see these layers and clips on the timeline in the browser in a systematic fashion like the way we get with keywords ?
and keywords can only be used in the imported clips already in the browser ,and not after we drag it on the timeline.....
Till now I think exporting and importing back is the only option ...but is there another work around ?

I lost all of my Itunes music because of an infection that required them to wipe my computer. I am trying to get the music back from multiple sources. What I have recovered is a mess. Albums are mixed or songs not grouped as album. Help?

My computer got infected with some terrible virus. I contacted the manufacturer and they said the only thing to do was wipe the whole thing. I could not back it up bec this mess?ause it would include the infection. I have been trying to recover the lost music from several different places. A friend tried to help me by putting all of his music on my computer from his external hard drive. That was very nice of him but now it is a terrible mess. The recovered songs are not grouped into albums correctly. Some albums are mixed - every other song is from the other album. Some songs are listed separately and not grouped as an album. I tried to ask iTunes to find album art work and it has been running that for over 48 hours. Is that possible? When I try to stop it I get a message that says I will lose all the data. I admit that I am not very tech. savvy and I really don't know what I am doing. It took me more than 20 years to make that collection and I am heart broken. Do you have any ideas about how I start to fix

Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?

Why is it that when I connect my iPhone 5S to my Windows Vista computer, the photos made with my iPhone are all of very low quality and most of them are turned upside down?
On another note, the iPhone tells me that it's ''busy'' when opening a photo on the computer.
(I tried restarting my PC, connecting via another USB port, importing using PhotoStream, etc...)

Are you using the front or rear camera? When you say they are low quality, are you referring to file/pixel size, or how the picture looks? As far as upside down, how are you holding the phone? Older versions of Windows have issues reading the Metadata from the pictures and will not display the same.

How do I use my wireless Led TV as a second monitor using my home network without any cables? Both of them are connected to home network

How do I use my wireless Led TV as a second monitor to my mac book pro using my home network without any cables? Both of them are connected to home network

Having a gateway there is not going to be a problem. We just need to configure the Time Capsule correctly to work with the 2Wire.
You will need one ethernet cable to connect the 2Wire to the Time Capsule and a second ethernet cable to temporarily connect your computer to the Time Capsule so that it can be configured.
The 2Wire you have now should already be broadcasting a wireless network, so once you have the Time Capsule setup, you will actually have two wireless networks there.
Here's how to configure the Time Capsule to work with the 2Wire:
Connect an ethernet cable from one of the LAN <-> ports on the 2Wire to the WAN (circle icon) port on the Time Capsule.
Connect another ethernet cable temporarily from your computer to one of the LAN <-> ports on the Time Capsule
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Base Station tab below the row of icons to assign a name for the Time Capsule, a device password (write this down) and adjust time zone settings
Click the Wireless tab below the row of icons
Wireless Mode....Create a wireless network
Wireless Network Name....Your choice
Radio Mode....Automatic
Channel...Automatic
Wireless Security...WPA/WPA2 Personal
Wireless Password....Your choice (write this down)
Check mark next to....Remember password in keychain
Click the Internet icon
At the bottom, change the setting for Connection Sharing to "Off (Bridge Mode)"
Click Update at the lower right and the Time Capsule will restart after 20-25 seconds and you should get the green light.
You should now be able to connect to your Time Capsule wireless network.
I'm not clear on whether you have tried to setup the Time Capsule to backup your computer. Post back if you need some info on that. We may need to start another thread for that as that will be a different subject.

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2 icloud just

I had to change my Apple ID and password in itunes. Now my icloud doesn't work and I can't update my apps on my iPhone. I have looked at suggestions on the community pages and apple suggestions but none of them are relevant to iOS 8.1.2
icloud just keeps bringing up my old email address & asking for my old password which doesn't exist anymore and when I try to sign out of icloud it wants my old password, when I tried to change my primary email back to the old one it wants me to verify it through an email address that doesn't exist. Please can you help me sort out this nightmare.

Hi skippy2012trev,
Welcome to the Apple Support Communities!
I understand that you updated your Apple Id and password but now you are being prompted for the old information in iCloud. You are on the right track by changing the Apple ID back to the previous email address temporarily so that you can sign out. You should not need to verify the email address. After you edit the Apple ID back to the old email address and then sign out of iCloud on your iPhone, edit the Apple ID back to the address you would currently like to use. There is no need to change the password again, only the email address, unless you prefer to update the password again.
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Sign Out, then tap Sign Out to confirm. If you're using iOS 7 or earlier, tap Delete Account, then tap Delete to confirm.
Tap Keep on My [Device] or Delete from My [Device]. In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
Cheers,
Joe

TS4006 I have several iphones on find my iphone. How do I know which one is the correct iphone. None of them are labeled Iphone4 or 5 etc.

I just had my iphone stolen from me. In the past I have always set up my phones an ipads on to the find my iphone service. I have never deleted them from the find my iphone account and now I have 3 iphones showing and 2 ipads. How can you tell the difference when none of them are labeled as Iphone 4, iphone 4s, iphone 5, etc. No dates are shown as when purchased so it I can't figure out which one is the correct iphone to put on lost mode and send message to.

Deleting on one device does not affect another device.
You can delete the App's on the iPhone and nothing will happen to the ones on the iPad.
1. You don't need to.
2. Settings->Cellular->"Use Cellular Data For" will show the data usage for each App since the last statistics reset
3. Settings->General->Background App Refresh Will show which Apps are allowed to get data in the background
4. It restricts it to Wifi. If the App requires internet access and Data is turned off, it will have to wait until the device is connected to a wifi network.
5. Nope, You just use up battery since the BT radio will continuously look for nearby BT devices.
6. The Personal Hotspot uses your cellular internet connection from your phone or other cellular device; whether you consider that secure or not I cannot say. It also depends on what you are doing while connected to the Hotel's wifi. I would not do online banking while on vacation though.

I have a 3rd generation ipod that will not connect. I keep getting an error message that says "USB Device Not Recognized". I have tried 3 seperate cables and none of them are working. Please help!

It keeps telling me that one of the USB devices for this computer has malfunctioned and windows does not recognize it. I have tried all of the ports and still am not having any luck. I have purchased 3 brand new cables and none of them are working. I have tried to update the driver but it says I am using the most up to date. I have tried to reset the Ipod by holding the center button and menu button until the apple appears. I am not sure what else to try. Any help would be greatly appreciated. My computer is Windows Vista!

Hello butterflygirlie,
Have you tried uninstalling the driver for your iPod from within Device Manager? After uninstalling it, go ahead and unplug your iPod and plug it back in. Doing so should cause your system to locate the proper driver for it.
B-rock

I have a TON of bookmarks that I want to back up, but when I open the window to organize them, back them up, etc., none of them are there! Can anyone tell me why this is happening and how to fix it?

On the dropdown menu where my bookmarks are, I select "show all bookmarks", which opens up a window called "Library". I should have hundreds of bookmarks, but none of them are showing in this window.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

While updating my apps, I lost my wi-fi connection. I have since tried to update the apps several times...but none of them are updating. Each time I try to update the apps, I enter my password, but then nothing happens. Thank you - Chris

While updating my apps, I lost my wi-fi connection. I have since tried to update the apps several times...but none of them are updating. Each time I try to update the apps, I enter my password, but then nothing happens. Thank you - Chris

Hold the power button and the home button down until the screen goes black and the apple logo appears. This will do a reset and you should be able to update your apps then.

HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

Make sure there's nothing blocking a contact in the charging port of the phone.

Arbic fields and english fields are mixed in exported data from oracle

I have a oracle db with character set UTF8.
I have exported some data from a table with arabic detail through sqlplus
and saved in a text file.The file is | sepereted.
I can view this file properly while using textpad.
But in note pad the arbic fields and english fields are mixed.
I have anothe application which is accept the data from note pad only.
so i am not able to export arabic data properly in notepad.
Can any one help from this issue.?
Thanks,
nash

Thanks for your reply.
i have saved the file in UTF8 format and still the same.
i will explian you the real issue.
We have one Dot net application and we need to upload some data to this application.
I can upload the data which is contain only English detail.
But i am not able to upload the arbic detail.So i ve checked the application and the data which i am uploading to this.
And i found that the data which i am uploading is mixed with arabic fields and english fields.
There is a field seperation in my data which is '|',So i can see some arabic field is mixed with some other english field
if i open the file through internet Exploreer or notepad able to see the mixed field detail.
But i can see the data in textpad are correctly.
The upload data file is taking from oracle database through toad.
I have tried with SQL plus also.But still the same.
Please help me out from this issue?

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ?

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me

How to add a hyperlink to a image button in theme area?

Hi!
We need to make an image button (on the theme area) to be
clickable -- i.e., once you click that image button, it will
call www.yahoo.com.
Please advise how to do it.
Points guaranteed. Thanks!

Hello,
Maybe this will help you?
http://help.sap.com/saphelp_nw70/helpdata/en/9d/52f973810cb448842e35e13ad6c992/frameset.htm
Gene Madikrama

Themes are mixing

Similar Messages

Maybe you are looking for