Themes from panther discs?

I have Tiger installed now, but can't find my idvd themes after a repair done recently. I have been combing this forum and can't find how to put the themes back on.
I found the packages, but there is no idvd package. I downloaded some of the free themes that are listed in the forum, but I liked my old themes better.
I am a real novice at this...help?
Thank you.

You can extract the older iDVD from the installation discs that came with your computer with Pacifist and then open that application and drag out the theme packages from the Resources folder. You might not need Pacifist. Open the installation disks, maybe the Software Restoration one, and select the install package icon. It's usually an alias so Control-click on it and select Show Original. Then can open some of the other packages you'll find with the Control-Click, Show package contents, and locate the iDVD package. I believe there may also be an iDVD theme package.
Hope this has been of some help. Good luck.
OT

Similar Messages

  • Problems starting up from panther discs

    Hello! My Mother recently purchased a printer that only works with Mac OS X, but her iMac was only OS 9.2. I thought it'd be easy to upgrade, and purchased a retail version of OS X Panther discs from macresue.com. Well, everytime I try to start up from the first disc it flashes a white screen and then the "?"/mac face. It does that a few seconds and then does a normal start up. It's a iMac G3, Power PC, 400 mhz, 128 RAM (bought from an apple store a year after we purchased the computer.) It has a DVD Rom drive, but not a CD burner or anything like that. I'm pretty sure it should be able to start up the disc. I have the required firmwire update (4.1.9), and the only thing I can think of think of that might cause a problem is the keyboard. It's not an Apple product (kensingston) but the Apple keyboard we have is broken (water spilled on it!) I'm not about to go running to buy a new keyboard, because I'm not sure if that'll even help. I hope someone here can help me figure out what this computer's problem is with the OS X Panther discs?
    Thanks,
    Belle
    iMac G3   Mac OS 9.2.x  

    Hi Belle, and welcome to the discussions.
    First off, 128 MB is the minimum required for Panther; it will run, but it'll be slow. I just finished installing on a 350MHz iMac with 128MB of RAM (I'll be adding more RAM before putting the iMac to use). What you're doing will work - we just have to figure out what's wrong.
    1. You say you have the required firmware update. Does that mean it's been installed?
    2. From everything I've heard, macrescue.com is pretty reliable, but I just want to verify that you did indeed receive the retail disks. There should be four in the set, three black install disks, each with a large silver X in the middle, and one white XCode Tools disk with a picture of a hammer and blueprint in the middle.
    3. Is your RAM a single 128MB module, or two 64MB modules? If you still have the Apple Hardware Test CD that came with the computer, boot from the CD and run a thorough test.
    4. Even if your RAM passes the Hardware test, it's possible that something is wrong with it. Panther requires stricter adherence to RAM specifications than earlier operating systems, so the iMac might run perfectly under OS 9, but won't run at all under OSX. If the RAM was purchased from Apple, it should have a lifetime warranty. Take it back to the store and have them test the RAM, or better yet, see if they'll give you a discount on 256MB in exchange.
    5. Assuming the firmware has been installed, and the disks are the retail version, check the first install disk for any scratches, fingerprints, or imperfections. Polish the CD with a soft cloth to get it as clean as possible, then try again.
    Good luck, and post back with any questions/results.
    Andrew

  • Extracting DVD Player 4 installer from Panther discs

    Bugger me, I can't seem to remember the name of the programme that is used to extract the specific installation programmes from the Panther discs. I'm trying to get DVD Player 4 off of the installer (Interactual Player freezes too much.)
    Apple's Support site does not list a download of DVD Player that is compatible with Panther, but oddly enough lists a player compatible with Jaguar and Tiger.

    Justin:I wonder why I can't download it from the site...I have no idea why not. However, you can pick it off the install CD, thanks to Pacifist.
    Good luck.
    cornelius
    PismoG4 550, 100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS (10.4.4)   Mac OS X (10.3.9)   Beige G3 OS 8.6

  • Can't reinstall from panther disc

    Hi
    Safari was trashed on our computer by accident. I was going to reinstall it from our panther install discs but the installer says that the system on the computer is too new. The install disc is version 10.3 the computer is version 10.3.9. I am assuming it is newer because of the automatic updates. Does anyone know how I get the installer to allow me to reinstall safari?
    Dual 1 GHz PowerPC G4   Mac OS X (10.3.9)  

    You're Welcome Mike!
    Are these the updates that you downloaded?
    Safari Update 1.3.2,
    Safari Update 1.3.1, which, if you currently have version 1.3, must be installed first.
    But I'm surprised that Software Update is not reporting them.
    And Thank You, for extending the courtesy, of awarding stars in Discussions!
    ali b

  • HT1473 It seems like many commercial music CDs won't import into iTunes (copy protection?), so you can only play them from the disc, not your other devices. Am I missing something?

    More and more commercial music CDs won't seem to import into iTunes - they just spin, falter, and spit out. I would think I had a setting wrong except older CDs load with no problem. I'm guessing there's copy protection on the newer ones, which seems unfair if you want to, say, buy a CD that has bonus material not available via iTunes (and then have to buy the regular material again on iTunes). Is there a way around this? An easy fix so I can keep buying CDs when I want to? I know it's a technology that's on the way out, but it's not gone yet.

    Audio CD copy protection is relatively rare. I doubt its use is on the increase as it would be just one more nail in CD's coffin. On the few occasions I've bought CDs that won't rip I've gone straight back to the store for a refund. If the drive is attempting to read at max. speed it might help to force it to read slower (if indeed you have that as an option) and it may help to switch the error correction mode.
    tt2

  • Reconstruct Blu-ray project from burned disc

    I have burned the project to BD and save the files in the project folder.
    However, on the disc, the files is muxed.
    In the old day of DVD, demux is pretty easy to get back m2v and ac3.
    In the base of BD, how do get back m4v and ac3?  Is there a demuxer that can do this?
    Thanks

    I have created an Encore project a while back, completed it and burned the BD.
    After that, I've lost the original m4v and ac3 files.  But all files in the Encore project folders are saved.
    Now, I'd like to make a minor change in the menu.  If I open the project now, it will ask me where are the m4v and ac3 files.  I am hoping to extract them from the disc, precise down to each frame.
    Is there way to do so?  Thanks

  • Upgrade from 9.2 - can i buy jaguar? i have panther discs

    hi
    i've recently bought a second hand iBook G3 Dual USB (i.e. it has two usb ports which I think means it is Dual). it also came with panther discs, which i've tried to install (upgrade from 9.2), but installation is interrupted say ing that i need osX installed already.
    Does that mean i need to upgrade to jaguar or a lower version first? I've read so much stuff in the discussions but can't quite find the answer to this one.
    From the specifications documents linked in one post, it appears there is no firmware upgrade necessary or available for this model.
    thanks a lot for any suggestions
    gs

    OS X upgrade discs are relatively rare. Apple generally only does full versions at reasonable prices and as eww says having this disks don't help at all in your case - unless you have Jaguar on the 'iBook Install/Restore CD' but it is not yet installed (Perhaps the previous owner stuck with OS9). Not all iBook Dual USB would have been supplied with any version of OS X. 
    Froogle turns up several resellers who sell Panther but when you drill down you find most are out of stock (no surprises there). I did find one that was selling it for £95 but for £5 less you can get Tiger (10.4) from the Apple store (so if your iBook meets the Tiger specs you're probably best to go for the more modern OS). I find Panther a lot more stable, but Tiger is much nicer to use.
    regards
    mrtotes

  • Re-installing panther from a disc for another machine

    Can anyone tell me (or refer me to a topic that can tell me) if I can reinstall panther on my clamshell using the discs that came with my mac mini. I bought the clamshell on ebay, and it didn't come with the panther discs (only the original os 9 discs) and I want to install the OS fresh. Thanks.

    Some discs are machine specific. For instance, a laptop has a slightly different drivers installed, power management for the battery, etc, that the Mini discs may not put back.

  • I have installed elements 13 from a disc and the organizer recognizes version sets, but won't let me expand them.  Is there a patch?

    I have installed elements 1`3 from a disc and cannot expand a version set. Help?

    This is PSE 13? If so, it's not a bug, it's a feature. The new adaptive grid view in the organizer, where you see the thumbnails edge-to-edge, doesn't do stacks or version sets. Press. Ctrl+D/Command+D to get back to the old detail view instead.

  • Upgrading from Panther to Leopard

    Hello,
    I wanted to upgrade my Powerbook G4 from Panther to Leopard. Was told I needed to upgrade to Tiger first then to Leopard. I bought the Leopard installation CD and will be using the Tiger installation CD that came with my MacBook. Am I good to go? I already enabled the "root" user and is trying to back up my files (which I have another problem with --- been getting error messages such as 1.) "One or more items can't be copied. Do you want to skip them and copy the remaining items? 2.) You cannot copy the item "Icon" because the name is too long or includes characters that the disk cannot display."
    Would very much appreciate any help I could get =)
    Many thanks!

    As already mentioned you do not need to upgrade first to Tiger. In any event you cannot use an Intel version of Tiger on a PPC Mac or vice-versa. Fortunately, you can upgrade directly to Leopard from Panther or you can do an Archive and Install which is what I would recommend:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    DO NOT ENABLE THE ROOT USER!! It is not recommended nor necessary for backing up your data. Copying files is not how you do a proper backup. Read the following:
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Intego Personal Backup (Commercial)
    9. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
    Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
    Note that before doing your backup you should do the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Upgrade from panther to leopard-partition new macintosh hard drive?

    hello,
    i have some upgrade questions:
    i have a mac g5, dual 2.5 with 4 gigs of ram in it. i've been running logic pro 7.1.1 for the last three and half years or so on panther, never switched up to tiger. my computer hasn't been running so great so recently, (problems with audio midi setup in logic, and with i-tunes) and also my mac hd is almost full. i bought leopard and logic 8. before trying an installation i used carbon copy cloner 3.01 to make bootable clone of my my hard drive onto an external firewire drive, (it boots up fine, albeit with the same little wierd issues as the original hard drive) would it make sense, since my hard drive is so full anyway, to buy a larger internal hard drive to replace the original hard drive, partition it somehow into two parts, clone the clone back to one of the partitions to have my panther setup on an ATA, then install leopard on the other half? would i risk bringing the wierdnesses back, or would they only be confined to the one leopard partition. is this even possible? if so, how would i do it?
    thanks!
    dave

    What makes sense to me it to just leave the old Panther install on the original drive and install a new faster 500 GB internal drive for Leopard. Your PowerMac can have more than 1 internal drive and can boot from any drive with an OS on it.
    I would not do an upgrade install with all the old and apparently corrupt files in your old system. Leopard has proven that if you start out with a less than perfect system, the upgrade will make it worse. The list of strange behaviors and problems that look like bugs on this forum is very long and you would be importing your existing wierdness and possibly just make it worse. There are several programs that actually break the upgrade so that it won't even boot.
    Download the 10.5.2 Combo Update from Apple. Install OS 10.5 fresh to the new drive. Repair Permissions using Disk Utility. Install the 10.5.2 update and Repair Permissions again.
    If you want your iLife applications you will need to get them from the Bundled Software installer on your original setup discs for Panther or you can buy the latest versions separately (iLife is not included on the Leopard Retail DVD).
    Use Software Update to get the latest versions of just about all your Apple programs and Repair Permissions again. Install your new Logic Pro and new Leopard versions of all your applications. If a program isn't updated for Leopard make sure there are no problems with it from it's support group. If it's no longer supported don't use it and find a replacement program that is.
    Setup your email preferences and accounts fresh. You can import your messages later, along with your other data files that are important. If you don't spend a few hours setting up your new fresh OS properly, you will spend weeks trying to get a broken upgrade to work. You stand a much better chance if you don't start out badly.
    Depending on it's size, the external drive can be used for Time Machine for awhile or to clone your Leopard installation to in case you ignore my recommendation for a fresh install and go ahead with the update.

  • IBook G3, thinking about upgrading from panther to tiger?

    Hello all
    This is my first apple computer that I've owned, it's my mom's hand me down after she got herself a spanking new macbook pro but it actually runs decently fine, iBook G3 500Mhz, 40gb HD, 640mb memory
    It currently runs a clean copy of panther 10.3.9, but with some effort, I think I could get my hands on tiger as well. However, before I do, would it be worth it to try to upgrade it on this laptop? I think panther runs fine, but I hear for each successive mac osx, it's been running faster, so in that case, I'd try to get it, but if I happen to find that it's about the same or worse, then maybe not worth the effort. I definitely like to be up to date with my software and such, so it would be nice if people with ibook G3's with specs similar to mine could tell me their experience going from panther to tiger.
    Thanks in advance

    Welcome To  Discussions daonesteven!
    Here are images of the Full Retail Version, of the Tiger Install DVD, referred to by cornelius, that must be used.
    If you know what to look for, those install discs, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, FastMac, etc.
    The discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    As the Tiger Media Exchange Program is no longer being offered, if the iBook doesn’t have a built-in DVD-ROM player, you will have to use an alternative method of installation.
    Info here Installing Tiger without a DVD drive.
    Once Tiger 10.4.x is installed, you can use the PPC 10.4.10 Combo Update, to upgrade to the current version.
    And additional RAM may speed the iBook up.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Can't find files after restoring them from Time Machine

    Hi!
    Yesterday I formated my macbook pro and re-install Mountain Lion. Before that I made a backup using Time Machine.
    When I wanted to create full system restore I couldn't do that. Neither using migration assistant neither with Mountain Lion startup disk. But that was yesterday story. I guess I was one of those unlucky guys who can't do a system restore because some strange reason.
    So what is the problem today: They someone says that I should enter a time machine and do a restore of a Macintosh HD. Restore of the whole hard disc.
    And I did that.
    And now I can't find those files on my Macbook. I can see on disk space  that they are on the disc but I can't find them.
    Is it because of the different user account or something like that?
    It would be really great if I could get a full system restore but it would be also great if I could just see all the files that i restored.
    THanks for the help guys!

    That's not the right way to restore. Delete the folder named "Macintosh HD" in the Volumes folder. It will take a very long time.
    Most likely, some folders were inadvertently excluded from your backups, and as a result you can't restore your data in Recovery, Setup Assistant, or Migration Assistant.
    Starting from a fresh installation of OS X, set up a new administrator account and log in. You should now be able to enter Time Machine and restore your user data from a snapshot.* I suggest you do this in two stages. Quit all applications except the Finder before you begin.
    Restore all the visible items at the top level of your home folder.
    Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
    Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
    You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
    You'll have another problem if this is a new computer, or if you erased the startup volume: Time Machine won't continue your previous snapshot series, but will instead try to begin a new one, starting with a full copy of all files. There might not be enough space on your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
    *If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
    Browse Other Backup Disks...
    from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
    Show Time Machine in menu bar

  • I have installed Premiere Elements 11 from a disc I bought from Amazon.  I keeps asking me to re-install or if it does start stops a few minutes after I start a project.  I have a windows 8.1 PC.  I have tried numerous times to install the program and als

    I have installed Premiere Elements 11 from a disc I bought from Amazon.  I keeps asking me to re-install or if it does start stops a few minutes after I start a project.  I have a windows 8.1 PC.  I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work.  I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

    WhiteHouse Norm
    This question is already being responded to in the following duplicate thread
    Premier elements 11 keeps stopping
    Please reply in the other thread which has a discussion in progress.
    Thank you.
    ATR

  • G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

    We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
    We were in the process of installing 10.4 Tiger before placing it for sale.
    The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
    It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
    Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
    On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
    We have done the following during our troubleshooting:
    - Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
    - Remove RAM 1 stick at a time and reboot
    - Replace RAM with RAM from another working Quicksilver
    - Replace Video Card with one from another working Quicksilver
    - Zap PRAM
    - Reset CUDA switch
    - Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
    - Tried booting from the Macintosh Server G4 Software Restore CD
    - Tried booting from Mac OS X Server CD
    - Tried booting from AppleCare Protection Plan CD with TechTool
    - Tried booting from Diskwarrior CD
    - Tried booting from an external FireWire drive with a disk image of Tiger OS Install
    - Tried booting with the hard drive disconnected
    The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

    Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
    The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
    I would look at the CD drive cables, etc, and see if another drive gives different results.
    You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
    HT1310- Startup Manager: How to select a startup volume

Maybe you are looking for