Themes News

Good morning
I am developing dashboards with Xcelsius and I have two questions about the possibilities of adding new themes that come predefined either by a new version or can download from somewhere to incorporate the second question is to deploy the new version of Xcelsius only I bring it down and reinstall or uninstall and install from scratch.
I very much appreciate your help
Greetings
Merry christmas

Hi John,
As you rightly said, the themes comes predefined in the Xcelsius.  When you install Xcelsius, the themes will be available for you.  If there are any new themes in new version of Xcelsius then you need to uninstall previous version and then install new version of Xcelsius. 
To get new themes which are available outside the Xcelsius (third party themes), you can use "Add-On Manger" to add it into you Xcelsius.  I have seen different add-ons for different components created by third party into Xcelsius.
Hope this helps.
Regards,
Rashmi

Similar Messages

  • Images (w/correct meta data) are in catalog and on disk, but LR 5.7 considers them new on Import

    For reasons explained below, I want to try to re-import all my images into LR and hope that none/few are in fact considered new and are imported.  Yet, for some folders, LR is apparently unable to detect that my source images are already in the catalog, and are on disk, and that the source file meta data matches what LR knows about the images.  When I click an image in LR and Show in Finder, I do see the imported image on disk.  I can edit the image in the Develop module.  So, it seems good, but all is not well.   Sorry for the long post here, but I wanted to provide as much info as I could, as I am really seeking your help, which I'd very much appreciate.
    Here are some screen shots that illustrate the problem:
    Finder contents of the original images
    LR folder hierarchy
    an image as seen in LR
    Finder content of external LR copy of images
    import showing 10 "new" photos
    The original images ... (I'm not sure why the file date is April 2001 but the actual image date is January 2011; I may have just used the wrong date on the folder name?)
    The LR folder hierarchy ...
    An image as seen in LR ...
    The external folder containing the images in the LR library
    But on import of the original source folder, LR sees 10 "new" photos ...
    I tried "Synchronize Folder ..." on this particular folder, and it simply hangs half-way through as seen in the screen shot below.   IS THIS AN LR BUG?   This is really odd, since "Synchronize Folder ..." on the top-level folder completes quickly.
    I have a spreadsheet of of the EXIF data for the original files and those created by LR.  (I extracted this info using the excellent and free pyExifToolGui graphical frontend for the command line tool ExifTool by Phil Harvey.)   Almost all of the Exif data is the same, but LR has added some additional info to the files after import, including (of course) keywords.  However, I would not have expected the differences I found to enter into the duplicate detection scheme.  (I didn't see a way to attach the spreadsheet to this posting as it's not an "image".)
    I'm running LR 5.7 on a 27" iMac with Yosemite 10.10.2, having used LR since LR2.  I have all my original images (.JPEGs and RAWs of various flavors) on my internal drive on the Mac.   To me this is like saving all my memory cards and never re-using them.   Fortunately, these files are backed up several ways.   I import these images (copying RAWs as DNG) into LR with a renaming scheme that includes the import number, original file creation date and original file name.   There should be one LR folder for each original source file folder, with the identical folder name (usually a place and date).  I store the LR catalog and imported images on an external drive.  Amazingly and unfortunately my external drive failed as did it's twin, same make/size drive that I used as a backup with Carbon Copy Cloner.   I used Data Rescue 4 to recover to a new disk what I thought was almost all of the files on the external drive.
    So, I thought all would be well, but, when I tried "Synchronize Folder" using the top-level folder of my catalog, the dialog box appeared saying there were over 1000 "New" photos that had not been imported.  This made be suspicious that I had failed to recover everything.   But actually things are much worse than I thought..   I have these counts of images:
    80,0061 files in 217 folders for my original source files (some of these may be (temporary?) copies that I actually don't want to import into LR)
    51,780 files in 187 folders on my external drive containing the LR photo library
    49,254 images in the top-level folder in the LR catalog (why different from the external file count?)
    35,332 images found during import of the top-level folder containing original images
    22,560 images found as "new" by LR during import
    1,074 "new" images reported by Synchronize Folder ... on the top-level folder in the catalog; different from import count
    Clearly things are badly out of sync.   I'd like to be sure I have all my images in LR, but none duplicated.   Thus, I want to try to import the entire library and have LR tell me which photos are new.  I have over 200 folders in LR.  I am now proceeding to try importing each folder, one at a time, to try to reconcile the differences and import the truly missing images.  This will be painful.  And it may not be enough to fully resolve the above discrepancies.
    Does anyone have any ideas or suggestions?  I'd really appreciate your help!
    Ken

    Thanks for being on the case, dj!   As you'll see below, YOU WERE RIGHT!      But I am confused.
        1. Does the same problem exist if you try to import (not synchronize) from that folder? In other words, does import improperly think these are not duplic
    YES.  Import improperly thinks they are NOT duplicates, but they are in fact the same image (but apparently not the EXACT SAME bytes on disk!)
        2. According to the documentation, a photo is considered a duplicate "if it has the same, original filename; the same Exif capture date and time; and the same file size."
    This is my understanding too.
        3. Can you manually confirm that, for an example photo, that by examining the photo in Lightroom and the photo you are trying to synchronize/import, that these three items are identical?
    NO, I CAN'T!  The ORIGINAL file name (in the source folder) is the SAME as it was when I first imported that folder.  That name is used as part of the renaming process using a custom template. However, the file SIZES are different.    Here is the Finder Get Info for both files.  Initially, they appeared to be the same SIZE, 253KB, looking at the summary. But, if you look at the exact byte count, however, the file sizes are DIFFERENT: 252,632 for the original file and 2252,883 for the already-imported file:
    This difference alone is enough to indicate why LR does not consider the file a duplicate.
    Furthermore, there IS one small difference in the EXIF data regarding dates ... the DateTimeOriginal:
                                                                                                     CreateDate              DateTimeDigitized                    DateTimeOriginal              FileModifyDate                              ModifyDate
    ORIGINAL name: P5110178.JPG                                     2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:01:17 11:29:00        2011:01:17 11:29:00-07:00       2005:04:24 14:41:05  
    After LR rename:  KRJ_0002_010511_P5110178.JPG    2001:05:11 15:27:18    2001:05:11 15:27:18-07:00        2001:05:11 15:27:18        2011:01:17 11:29:02-07:00       2005:04:24 14:41:05
    So ... now I see TWO reasons why LR doesn't consider these duplicates.   Though the file NAME is the same (as original), the file sizes ARE slightly different.  The EXIF "DateTimeOriginal" is DIFFERENT.   Therefore, LR considers them NOT duplicates.
         4a. With regards to the screen captures of your images and operating system folder, I do not see that the filename is the same; I see the file names are different. Is that because you renamed the photos in Lightroom (either during import or afterwards)?
    I renamed the file on import using a custom template ...
            4b. Can you show a screen capture of this image that shows the original file name in the Lightroom metadata panel (it appears when the dropdown is set to EXIF and IPTC)?
    SO ....
    The METADATA shown by LR does NOT include the ORIGINAL file name (but I think I have seen it displayed for other files?).  The File SIZE in the LR metadata panel (246.96 KB) is different from what Finder reports (254 KB).  There are three "date" fields in the LR metadata, and five that I've extracted from the EXIF data.   I'm not sure which EXIF date corresponds to the "Data Time" shown in the LR metadata.
    I don't understand how these differences arose.   I did not touch the original file outside LR.   LR is the only program that touches the file it has copied to my external drive during import.  (though it was RECOVERED from a failed disk by Data Rescue 4),
    NOW ...
    I understand WHY LR considers the files different (but not how they came to be so).  The question now is WHAT DO I DO ABOUT IT?   Is there any tool I can use to adjust the original (or imported) file's SIZE and EXIF data to match the file LR has?  Any way to override or change how LR does duplicate detection?
    Thanks so very much, dj.   Any ideas on how to get LR to ignore these (minor) differences would be hugely helpful.

  • Continualy getting mass emails even though they are deleted. Everytime a new email comes in I get 400 old ones..delete them, new one comes in..400 old ones return..?

    Everytime I get a new email on my computer, 400 old deleted ones come back. I delete them, a new email comes in, and I get 400 more. It is constant. Any ideas how to stop this? Thanks

    Your Mac doesn't run Classic or Mac OS 9.  Best to post in the forum that closest resembles the e-mail client.  If it is the postage stamp e-mail program that comes with Mac OS X, pick the Mac OS X version here, after going to Apple menu -> About This Mac to find your Mac OS X version:
    https://discussions.apple.com/docs/DOC-2463
    Generally if you mix gmail, AOL, with or IMAP and POP3 it is possible you have a mix of e-mails sitting on the internet and on your computer, and the Inbox will combine both if you click the wrong one in Mac OS X Mail.  Be sure to know what accounts you have selected by selecting the mail program's preferences.
    IMAP normally is server only, where POP is normally local to your machine.  Other e-mail programs have other designations usually described in your mail program's preferences.  When you delete you have to make sure the server copy is removed of any e-mails you really don't want, or get all e-mail locally and immediately delete off server.    You should backup your data even more regularly if you keep e-mail locally on your computer.  See my FAQ on backing up:
    https://discussions.apple.com/docs/DOC-1992

  • After downloading a new theme, new tab button disappeared.

    New tab button nowhere to be found; not on customize menu

    I didn't even download a new theme, just changed from the one I had been using to to another that I downloaded some months ago and the button vanished. I changed back but it didn't come back.

  • Firefox/plug-in container eats all cpu and ram only flash plug-in installed no theme new profile new windows install still can't fix

    I've been through hundreds of posts in the last year. back then all of a bloody sudden firefox starts eating my computer. 500+mb of use ram during normal browsing.
    Decent cpu use at around 25% but if i turn on youtube it hits 80% for about 6 mins then it's 97% to 100% and it's always in constant motion between those 4 values.
    playing any game which uses flash or java quickly become unplayable and I've seen it hit 1gb+ ram use.
    turning off flash protected fixed youtube but it's unsafe so need a different fix. and I'm out of ideas for everything else. I.E same problem, chrome is even worse than FF, and opera won't even run. so what do i do now

    1. it's wrong I have the current version 12. something.
    2. just firefox not even counting the plug-in container.
    3. the laptop is old almost 4 years, 1.93 GB of ram, only antivirus begins at start up, linux is something I'd rather not mess with a couple stupid people use my computer, and i have an intel celeron 900 2.20 GHz single core.
    you sounded condescending careful it's far more telling than you realize.

  • How can i reset my air port base station deleting all back to new

    Hello All...
    I'm desprate to get back control of my computer.... Everytime I go to an apple store they look at me like I'm crazy and not once have taken the time to resolve the problem. I have been dealing with what I think a hi jacked computer for going on a year now. My research has lead me to someone obtaining access to my computer o matter what I try. I have had it reset to factory setting way to many time due to thats all these kids at the apple store, great its free but never have they tried to take iniative and see why the problem consist over and over. Someone is obvisously harassing me costing me now almost 1500 trying to fix it. Its not that I have any sensitive information or like I'm in law inforcement, its now become personal. I went to the cops once in LA but they luaghed and told me to talk to the FBI, yeh right. You would not realize how hard it is to find a compuerter tech that or what I would call a master. I would pay top dollar to locate this enity for a few reasons. One peace of mind and two grasping what they are doing to get into my computer at there conveince.
    Symtems: it appears new firmware has infatrated my opperating system changing admin rights, new files that have nothing in them, new programs I have never seen. Iy appears what ever I do is copied into files and sent to a 3rd party.
    -there appears to be multible access points into this computer, modified bluetooth, severl USB channels, infared conection, eathernet, fire wire connections with mac address I dont reconize. there seems to be a new code in my computer that does not allow me to load anti virus in its full integrity. my phone logs to seem to be recorded on my computer. I have tried everything. I need help  to see what is the issue, reward available
    BlueTooth:
    Apple Bluetooth Software Version:          4.2.0f6 12982             
      LMP Subversion: 0x2283
    Services:
      Bluetooth File Transfer:
      Folder other devices can browse: ~/Public
      When receiving items: Prompt for each file
      State: Disabled
      Bluetooth File Exchange:
      Folder for accepted items: ~/Downloads
      When other items are accepted: Ask
      When receiving items: Prompt for each file
      State: Disabled
      Bluetooth Internet Sharing:
      State: Disabled
      Incoming Serial Ports:
      Bluetooth-Serial-2:
      RFCOMM Channel: 3
      Requires Authentication: No
      Bluetooth-Serial-1:
      RFCOMM Channel: 1
      Requires Authentication: No
      Outgoing Serial Ports:
      Bluetooth-Modem:
      Address:
      RFCOMM Channel: 0
      Requires Authentication: No
    Header 1
    Header 2
      Hardware Settings:
      Address:          20-C9-D0-BD-78-AE
      Manufacturer:          Broadcom
      Chipset:          Unknown (ffff)
      Firmware Version:          v131 c5492
      Bluetooth Power:          Off
      Discoverable:          Off
      Auto Seek Keyboard:          Off
      Auto Seek Pointing:          Off
      Remote wake:          Off
      Vendor ID:          0x05AC
      Product ID:          0x821D
      HCI Version:          0x6
      HCI Revision:          0x1574
      LMP Version:          0x6
      LMP Subversion:          0x2283
    Services:
      Bluetooth File Transfer:
      Folder other devices can browse:          ~/Public
      When receiving items:          Prompt for each file
      State:          Disabled
      Bluetooth File Exchange:
      Folder for accepted items:          ~/Downloads
      When other items are accepted:          Ask
      When receiving items:          Prompt for each file
      State:          Disabled
      Bluetooth Internet Sharing:
      State:          Disabled
      Incoming Serial Ports:
      Bluetooth-Serial-2:
      RFCOMM Channel:          3
      Requires Authentication:          No
      Bluetooth-Serial-1:
      RFCOMM Channel:          1
      Requires Authentication:          No
      Outgoing Serial Ports:
      Bluetooth-Modem:
      Address:
      RFCOMM Channel:          0
      Requires Authentication:          No

    THis is 100% true.
    It is happening to me, my home and now my office. Every computer every tablet and my iPhone 4s.
    I have studied it thoroughly. Works something like this. They use a BT stack and telephony while they are roaming and they release an incredibly smart and incredibly small package.
    It is a variation of ransomeware. It starts by using bt exploits by chainfiring BT drivers and commands from the new dual and quad core android phones. The package that they install on your iPhone, iPad, all tablets as well as Pc and iOS computers starts by disassembling your applications, opening ports and installs VPN. Once they have the VPN it is all over.  All of this happens in seconds.
    It is scary stuff. Starteed with my iPhone then it uses your phone, tablet etc as a hub and spreads to your other devices. Once u get it it is impossible to get rid of.  You need to stop everything go to someone else's house or area on their device and change all your passwords and then start wiping everything 100% format and reinstall with no wireless within range.
    Sounds completely crazy but it almost shut my business down and you can call geek squad or any tech and they will think u are crazy. I am in Orange County Ca and I wonder if it is just local because you are the 1st person I have seen with the exact same problem. Once in my PC at my office it jumped to everyone through LAN or BT. I have copies of the original package that was installed with instructions on how to deploy it how to use it.
    Nobody will even take you serious when you explain it to them.
    Symptoms are your computer is running slow, finding new folders and locked out of your own folders or programs. You then think ok just a virus so you scan but nothing detects it because it encrypts everything it does. I have tried every single virus and malware scanner out there and uses simple scripts to do its job.  But as it grows it starts modifying your complete system.
    IT is very very dangerous because it is undetectable by any type of virus scanner and once you are VPN locked everything they do looks like it is coming from you. I can scan my LAN and there will be anywhere from 6-10 people using anyone of my devices. I have just given up trying to fight it. It is very personal here as well but cannot stop it. Everything has been wiped but it made a hidden drive/partition on my laptop that starts the process all over again.
    You won't get an ip just MAC addresses. It is definitely something new and a new type of bug that no one has seen before. One of the things it did was modify AVG to run endless loops far above what the CPU could handle on my wife's computer and we could not stop any of the processes or shut it down, had to physically take the battery out and unplug it because the laptop got soo hot it was literally burning up. It gets even stranger so I am not going to go on about it and loose all credibility.
    It is definitely something you do not want to get but there is some info on the FBI cyber attack website. I think the basic idea is to scramble all of the info and ransom the solution key back to you.

  • NEW MAILDATABASE DUE TO TOTAL LOSS

    PLEASE HELP SPENT HOURS LOOKING FOR DEFINATIVE AWNSER TO NO AVAIL!!!
    We have a situation where we have corrupt maildatabase and public both very large over 250Gb combined.  We had total loss and no usable backups due to disk outage.  managed by just luck to gain back and semi repair public DB and most of Mail DB.
    However when we try to use them users experience whole load of problems.  Backed up both public and all mailboxes to PST files for short term access. BUT NOW NEED TO REMOVE DATABASES AND CREATE THEM AGAIN - WHATS THE BEST WAY??  PLEASE??
    We can import all data back once created just need clean DBs & instructions on how users will go back to give clear mailboxes ready for the import??
    THANKS IN ADVANCE - HOPE SOMEONE KNOWS..
    By the way we have SBS 2011 exch 2010

    SBS will allow you to create up to 5 mailbox databases I think, possibly 4 + 1 public.
    If you have backups you could remove (I think the term is disable, in EMC) the mailboxes for users. Create them new mailboxes in a new DB.
    You might try that for one user before you do them all just to be sure this fixes the issues you see.
    https://technet.microsoft.com/en-gb/library/dd335229%28v=exchg.141%29.aspx?f=255&MSPPError=-2147217396
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Optical drive scratching new dvd's

    I bought my macbook (black) back in June while on vacation and was able to watch a dvd on it in the airport on the way home. When I got home and watched another dvd I noticed it was scratched after watching it. I wasn't sure if it was already scratched or not, so I put in a new dvd and the macbook scratched it to the point it wasn't able to be read anymore. I took it in and they replaced the drive. Since then I have had another two disks get scratched, both of them new. I took it back in and had the drive replaced yet again. I just started watching another new movie and I heard a funny noise so I ejected the dvd. Again it was scratching the disk. I don't understand why this is happening. Any suggestions? (Yes I know I am a slow learner, but I keep hoping that a product this expensive won't eat dvd's.)
    I don't know how many times apple is willing to replace an optical drive. Like I said, this is the third drive I am on. I have had my computer in the shop more than I have been able to use it!
    black macbook   Mac OS X (10.4.8)   2 GHz intel core duo, 512 MB 667 MHz DDR2 SDRAM
      Windows XP  

    I have heard that moving the laptop will make the scratching worse. I could accept that as the cause if I was actually moving the computer when it scratches the disks, but that has not been the case when mine have been scratched. I don't understand why it scratches in the first place. Cars have cd and dvd players in them all the time and they don't seem to have those problems.

  • Two new IDE-Controllers after BIOS update, but not installable

    Hi there,
    i recently updated my bios to the latest version and now the following strange thing happens:
    when i boot my machine (875P NEO, P4 2.8 GHz, 1 GB RAM, 2 Otical drives at IDE0, 2 S-ATA drives at the S-ATA-controller, WIN XP SP), there are two new IDE (primary and secondary) Chanels to be found by the system.
    Windows seems to act normal as it states them "new device found" (all that in german as i live here and tries to install the proper drivers, i think.
    but then the new-devices-assistant pops up and tells me, that they cannot be installed because there are no drivers for my system.
    i even used the actual inf-drivers from the msi-site.
    that will happen at every start. in the hardware-manager there are both ide-devices marked as non-functional with a yellow sign in front of them with a exclamation mark in it.
    oh, and my office installation wants the same .cab-file from the installation-cd everytime i boot the system.
    the bios was the only thing changed.
    does anyone have an idea whatr to do?
    thanks in advance, cpo
    (hope that all is understandable

    yeah, seems like the same symptoms.
    my version was 3.6 from october 2004. Version 3.5 from september works fine except for the cpu temperature beeing displayed too high in bios...
    rollback to 2.5 did not work, still the same though i did not do the thing with the cmos-reset via jumper. will try this today...

  • Can't display new png picture in jsp

    My jsp is going to display jpg picture which is just created in my servlet.
    However, the jsp display old picture which is last time created. I think HttP server cache the picture and show the old picutre. I use same picture name for every time.
    I use <img source='<%=response.encodeURL("/img/chart.jpg")>'/>
    pls give me a hints.

    I don't think it is the Http server that caches the image; I think it is the browser. Most browsers won't keep requesting images they already have because they don't expect them to change minute-to-minute. Images normally stay the same for a long time. If your images keep changing, you have to give them new names (maybe use a timestamp in the name).

  • Setting Themes for Java Look & Feel

    Hi All,
    I am tring to set my customized theme to Java Look & Feel. I am able to set the theme using the following code:
    ASC_WhiteSatin theme = new ASC_WhiteSatin();
    MetalLookAndFeel.setCurrentTheme(theme);
    The above code works fine and changes the color schemes correctly.
    If I set another theme after setting the previous one i.e.let say abc Theme, dialogs and frames are updated properly where as JFileChooser start showing combination of both. Why?
    I am also updating the Look & Feel and calling
    SwingUtilities.updateComponentTreeUI(this);
    SwingUtilities.updateComponentTreeUI(this.getParent());
    ((JFrame)this.getParent()).pack();
    to refresh the themes for my frame. I am using JDK 1.4.1.
    Thanks in advance
    Wahaj

    try the beta-version of 1.4.2

  • Where can I buy a new charger?!?!

    Ok so my powerbook charger popped, fizzed, sparked and died. Now I am left laptop-less and in the middle of midterms week. Almost everyone I know owns an apple laptop but they all have the NEW chargers...ugh! What can I do? I tried ordering offline and this is the picture I keep getting with my search:
    http://store.l-f-l.com/cgi-bin/cp-app.cgi?rrc=N&pg=prod&ref=ACG4&op=M8482LL/A&bd =APPLE&CMP=BAC-nextag
    Where is the plug itself? It seems like I need another piece to connect it to an outlet. AH! Please help me!!!

    That is a third party AC adapter and I am certain that the photo is only for illustrative purposes, which is missing the second piece, the cord that goes to the outlet.
    Almost all third party AC adapters that look like this style, whether the three-slot or two-slot opening (if you know what I mean), come with the brick and plug that goes into your computer, and the cord that goes from the brick to the outlet.
    Of course, you can always try eBay where you can get them new and used for good prices. Just make sure you get the one for your machine. Third party adapters may have the wrong connector piece intended for the older G3s with thicker heads.
    If you buy Apple's adapter, or a compatible third party adapter, you can either get 45W or 65W since it is interchangeable and won't harm your computer. (If you had the 15-inch PowerBook, I'd recommend, aluminum that is, you get the 65W adapter).
    [http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=P owerBook65Wadapter]
    Here are some other places:
    [http://fastmac.com/poweradapter.php]
    [http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=82]
    [http://www.newertech.com/products/65w_poweradpt.php]

  • Quickest way to sync new ipod with old one?

    Hi all - I have not been able to find an answer to this specific circumstance, so I'm hoping someone here can help... Here it is:
    I have two Nanos (we'll call them "new" and "old"). All of the music that is on the "old" Nano is on my MacBook, in iTunes. I'm not switching computers, fyi.
    Because I have thousands more songs on my computer than are on the Nano, I would like an easy method for putting all of the songs that are on the "old" device onto the "new" device (easier than manually locating them in iTunes and adding them to "new" Nano).
    The solution might have something to do with syncing, I dunno. Should I select "sync music" on the "old" device? If so, what does that do and what is the next step for adding those exact songs to my "new" device? Whatever the answer, please spell it out for me.   Thanks!

    Nevermind. Found my answer here: Transferring a playlist from one ipod to another 

  • I can't resize new rectangles with the new Illustrator 2014

    I know from reading other boards that there are related issues with snapping to grid but I'm having an issue only with resizing rectangles when I create them new. We have others in our company using Creative Cloud that have updated and they are not having the same issue I am having.
    Basically when I create any new rectangle, or rounded corner rectangle it is a fixed size and I am not given the handles to resize it. I have to select the object then go to Object > Shape > Expand Rectangle in order to get the corners to grab and reshape or resize. I have checked and unchecked all of the settings that I can see or read about and nothing changes this. It's a real pain to have to go through this with every object I create.
    I have also tried rebooting the software and my computer several times but it's still the same.
    Am I just missing some small setting somewhere?

  • Setup new cockpit for different company

    Dear Forum,
    To make new cockpit for differebt company, i see the steps that to be needed :
    below is how to install dashboard for multiple companies on the server.
    1) create new SLDs (with new IDs)
    2) export com.sap.b1i.dashboards BizStore
    3) fix Info.xml, Deployments package, copy old dashboards and set them new names with corresponding IDs.
    4) import new package to BizStore
    5) Set Up event sender with new companies
    6) In the Integration Framework -> Scenarios -> Scenario Package Setup:
    6.1) turn sap.Xcelsius scenario off
    6.2) push button Sender, activate new companies
    6.3) turn sap.Xcelsius on
    7) disable dashboards and cockpit in target companies
    8) re-start event-sender, Integration Service
    9) enable cockpit and dashboards in target companies.
    no 1 i already done and test connection ok, but no 2 - 5 how to do it? which module i use it?

    Dylan,
    For step #2, you need to open the B1if Tools and there you will have an option on the to export different aspects of the BizStore.  There is a drop-down for what you want to export.
    Once exported, you then need to use an xml editor to make the changes and then once done re-import the changed files.  You setup the new company information in the SLD option in B1if.
    Hope that helps,
    Eddy

Maybe you are looking for