Then implement FI/CO after Implement MM SD PP,

Dear All.
Our company have implemented MM SD PP for a long time,but not implement FI/CO,now we plan to implemet FI/co.
now I want to know how we should to handle ther previous accounting data.
Thanks!
Fanny

Hi,
The Previous Accounting data can be uploaded into SAP thru LSMW
Regards,
Satish P

Similar Messages

  • Syntax error in ABAP query after implement patch

    Dear All,
    After implement patch from SAPKA46C39 to SAPKA46C53, we have syntax error in our query.
    our SAP release version is 46C.
    The error in query is -The data object "R01" does not have a component called "046" -
    We don't found any SAP notes that match for our error.
    Anyone ..please help...
    Thanks a lot...
    Budituta

    Hi,
    The query generated is based on the table structures available as they are used, etc.
    So please check if there is any difference in the fields available in the tables used, LDB used if any.
    In addition, may be few of the properties of the SAP query and info set does not get copied properly.
    and after activating the info set only, activate the query, etc...check them once again.
    Regards,
    Santhosh.

  • After implementing Note 992032 getting errors in Bex workbook

    Hi All,
    After Implementing the note 992032 (You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about using transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes) getting error messages in BEx workbook when try to filter on any InfoObject but when I run query I'm getting data but not able to filter, we are using BI 7 on patch 11. When implementing the note number 964580 it's giving error and this particular note number is not yet implemented.
    Getting error messages like:
    1. Error reading the data of InfoProvider 0FIAR_O03
    2. An error occurred in the program:
    3. ORA-20000: Insufficient privileges ORA-06512: at "SYS.DBMS_STATS", line 2150 ORA-06512: at "SYS.DBMS_STATS", line 14112 ORA-06512: at line 1
    4. System error in program CL_RSR_WWW_RENDERER and form GET_FILTER_VALUES_CHA:03 (see long text)
    Before implementing 992032 everything worked well.
    Could anyone please help!
    King Regards
    Suman

    We are getting similar errors after applying BW SP11 yesterday on our dev BW system.  I've opened a message with SAP support .  If anyone gets a solution for this please post it.
    Regards,
    Ron.

  • AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE

    Hi Experts...
    Requirement: AFTER IMPLEMENTING OSS NOTES 390635 HOW TO SEE PRODUCTION ORDER CHANGE HISTORY?
    I have seen many threads about implementing OSS NOTES 390635, but hardly any one narrated the process in detail as to how to see 'Change History'..
    I just would like to know 'how' and 'from where' to find Order Change History in detail (i.e Prod .order Comp. change history, Prod. Ord. Operation Change History, Prod. order header change history etc..)
    In general this isssue might sound old one..but 'POST IMPLEMENTING OSS NOTE 390635' is rare one.
    Folks need your expert comments and valuable suggestions....
    Thank You...
    Lucky

    Dear
    You should goto CO02-Enter Production Order -Goto -Change Management -Here it will list down all the chages with relevent information .
    Refer : Re: Production order changes history
    Production orders
    Regards
    JH

  • Error after implementing SP11 Patch 5 for 7.5 MS

    After implementing SP11 Patch 5 for BPC 7.5 the SPRunConversion function (which worked find under SP07) no longer works.  Every time that the function runs an error FX-160 is generated indicating that there is No Entity selected.
    I have modified all of the applications, optimized all of the applications, and reprocessed all of the rate related dimension files.
    Has anyone else run into this issue with the stored procedure after upgrading to patch 5 on SP11?

    Hey Experts,
    other templates working fine (personell admin. personell time, organizational management, travelmngt.)!
    The templates running in the 3.5 BW....but since the update of our testsystem the e-recruiting templates give back these errors.
    We dont wanna initialize the migration of templates and other objects to 7.0 now. Maybe in a few months.
    Could it be that several (in my case the e-Recruiting Templates/Queries) 3.5 objects never be running without migration?
    Thx for your answers!!!
    kind regards,
    moriz

  • After implementing EHP3, is it possible to close/open MM posting period at

    Hi,
    After implementing EHP3, is it possible to close/open MM posting period at segment level ? Do you people have any idea?
    Is there any way to close/open MM posting period at a level lower than company code?
    Regards,
    Jayant

    No, the period is at company code level. This is same as FI.

  • Client GWI version10: setup.msi issue after implementing note 1562571

    Hi,
    I have installed version 10 of the client based groupware integration on a CRM 6.0 system. Up till now, we were not able to let synchronization work (screen with the options was greyed out).
    I had created a message for SAP and after some exchange they advised me to implement note 1562571:Solution for ISScript.msi error. We were not having this error but as SAP had a look into our system, I followed the advise.
    After implementing this note via SNOTE, I got an error (which I didn't had before!) when I tried to install the synchronization software saying that the setup.msi was not correct (taking a look into SE80 bsp appl: CRMCMP_GW_WC, the file attached is setup.exe).
    Did someone had the same issue? Any help is very appreciated!
    Thanks in advance,
    Yasmine Marchal

    Hi ,
    I think there is a note which can solve the msi issue , I havent implemented it .. please check Master Note - 1563898 ( this is for 7.0 EHP1 i think )  . You can look for the right note for CRM 6.0 at the service marketplace.
    I have configured Groupware Int for Outlook 10 and CRM 7.0 EHP1 . Initially we were facing this error where the SAP DEFAULT profile was getting downloaded when we clicked on the Edit Sync settings. Is this what was happening with you ??
    We created a new profile in GWIPROFILE and maintained the crm_ui_profile parameter with the correct business role in SU3 and now we can synchronize.
    Let me know if you were able to resolve the issue with a note .
    Edited by: Neha M on Sep 29, 2011 1:24 PM

  • Internal Auditor's Role after implementation of SAP

    Dear Experts,
    Can you please guide me on what would be the Internal Auditor's Roles & responsibilities after implementing SAP in his organization?
    Thanks & Regards,
    Reshma
    Edited by: Reshma Joshi on Jan 12, 2010 1:45 PM

    Hi Reshma,
    Whenever the Organisation is migrating to SAP, the internal auditor has to play important role. He will have to check
    Whether the Trial Balance is uploaded correctly which includes
      a. Uploadig of all the open items of Vendors & Customers
      b. Uploading of the other Balance sheet items
      c. Uploading of the P & L balances
      d. Uploading of the Assets along with the acquisition cost & accumulated depreciation (asset wise) in FI & AM modules. Both should tally.
      All these activities he has to monitor along with the Core Team members. Also he may play very important role during the cut-over stage also.
    Also he has to ensure that whatever are the statutory audit requirements, should also be fulfilled with the help of the new system.
    These are  some of the important areas in which he has to pay important role. But depending on the approach of the management, this can be increased.
    Regards,
    Amit

  • I recently purchased Windows 8 laptop and installed Office 2013. I then installed iTunes. After moving all my music to the new PC, I got iTunes to import it and sync it to my iPod (3rd gen).  However, I cannot get iTunes to sync my Outlook Contacts

    I recently purchased a Windows 8 laptop and istalled Office 2013.  I then installed iTunes. After moving all my music to my new PC I got iTunes to import it, and then synced it to my iPod (3rd gen.) However, I cannot get iTunes to sync my Outlook Calendar or Contacts with my iPod.  When I try it crashes Outlook.  iTunes continues to try to sync, but when it finishes my Calendar and Contents are empty (ERASED!).  I have de-installed and re-installed iTunes (according to Apple's instructions), repaired Office 2013 and Outlook, scanned for viruses (etc), cleaned out temp folders, defragmented, etc., etc., etc. Has anyone seen this before, and does anyone know houw to fix it?  (HELP!)

    Well, I guess I have to download some other software to make my apple product work. Really great stuff you guys sell. I will never buy another apple product. My Iphone, Ipod and Itunes are junk

  • Just upgraded to latest iOS and my iPad does not come back up.  It displays a line to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.

    Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on.  It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on.  I cannot reset it or anything else.  It is completely non-functional.

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • Contact is available when i sign in,then changes to unavailable after a few seconds

    When I sign in to Skype,one of my contacts appears available,but then changes to unavailable after a few seconds,although this time varies too. What makes this happen?

    This page explains the method for restoring from a backup without having the sync process delete your calendars:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudtm.html

  • Seems to capture but then won't quit after ESC pressed?

    We have new XRAID with Apple FC interface & running on Mac G5 and 10.3.9. We use FinalCutPro 4.5 and it all seems to capture but then won't quit after ESC pressed. The pinwheel spins and the Mac is unaccessible then after maybe 3 hours it finishes and everythings ok. Way too much time for a 15 minute capture! Aja Kona2 capture card and they have had me adjust the settings in the xraid admin but no change. Capture of a few seconds are usually finalized instantly. Any Clues?

    Same problem if you don't choose capture now ?? I've always though capture now to the raid was a BIG NO NO.

  • While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    Does the disc look like this DVD?

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing.

    I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing. I am trying to install Broterh printer disks. Any ideas? I am on Mavericks.

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

Maybe you are looking for