Ther are PARAMETER LIST DISCREPANC​IES in the help file vs the NIDAQ.H header file for GPCTR_Read​_Buffer...

PROBLEM: The function help file contains documentation for using GPCTR_Read_Buffer with 7 parmeters in the parameter list. The NADAQ.H Header file contains 8 parameters in the function declaration. Which is right? What is the correct parameter list and can an example be provided that shows how to use the function correctly? I am currently using DAQ ver 6.92 and a 6602 Counter Timer board in a buffered start/stop or ND_BUFFERED_TWO_SIGNAL_EDGE_SEPARATION_MSR application.

Thanks for the response Filipe, I'll let you know how it goes. I only went into the header file because example code provided by NI ... paste ...
iStatus = GPCTR_Read_Buffer(iDevice, ulGpctrNum, ND_READ_MARK, ulReadOffset, ulNumPtsToRead, ulTimeOut, &ulNumPtsRead, pulReadBuf);
showed use of 8 parameters - in agreement with the header file and in disagreement with the on-line help file function documentation.
Tom

Similar Messages

  • I have a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder app. There are also no "calendar" and "add an event" bottons on the Calendar App. Why?

    I just bought a new IPAD. There are no "list", "date," and "add a reminder" buttons on the Reminder App. There are also no  "calendar" and "add an event" buttons on the Calendar App. Why? Is there a way to add either a reminder or an event?

    For the reminders app - just tap on an open space on the ruled paper window under the heading in order to create a new reminder. Or tap on the + sign in the upper right corner of the app. You do not have the + sign on the app?
    For the calendars app to go Settings>iCloud>Calendars>On. Toggle the setting on and off and the + sign should appear in the lower right corner of the calendars app. Tap the + sign to create a new event.

  • My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

    My I4 will not allow me to connect a bluetooth. It keeps giving a message the pair list is full. There are no list available to delete. How do I correct the issue?

    Check this article: iOS: Third-party Bluetooth headsets, headphones, and keyboards
    Unpairing a Bluetooth accessory from an iOS device
    If you've paired your iOS device with a Bluetooth accessory and no longer wish to use that accessory, you may unpair it. If you wish to leave the device paired, but route calls through a second, paired device, turn off the first device and then turn on the second device. Then in Settings > General > Bluetooth, tap on the device you wish to use.
    From the Home screen choose Settings > General > Bluetooth. If Bluetooth isn't on, turn it on.
    Choose a device and tap Unpair.
    Until you pair the Bluetooth accessory again, your iOS device won't route information through it.
    * Find information on which iOS versions and devices support which Bluetooth profiles. Not all Bluetooth stereo headphones include a mic. Only those with a mic and that support handsfree profile (HFP 1.5) can be used to make and receive calls.

  • ERROR: MyService.jws:715:There are two or more operations with the same schema-element 'ns0:MyNameSpace' on the input message in a web service file or callback interface.

    I have two web service operations that have the same complex type as their input
    parameter. I want to map this type to an existing schema. I can successfully
    do this with the first operation using XQuery but when I attempt to do this with
    the second operation I get the following error:
    ERROR: MyService.jws:715:There are two or more operations with the same schema-element
    'ns0:MyNamespace' on the input message in a web service file or callback interface.
    ERROR:      SUGGESTION: Use different schema-element values for each of those operations.
    How can I use different schema-element values? The input parameters are to be
    mapped to the same schema and same element since they are the same for both operations....

    I am having the same problem. How did you resolve this..?? could you please tell me the solution??
    Thanks
    Shari

  • Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)?

    Hi,
    Is there a list of Out of the Box Adobe Interactive forms for HCM (HR)? Can you please help me?
    Venkatesh

    hi,
    there are standard ISR Adobe forms (interactive) to my knowledge, which you can customise at your convenience.
    kindly check at <a href="http://service.sap.com/adobe"></a>.
    more precisely, go here
    <a href="https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000478323&">Interactive Forms Delivered by SAP Solutions</a>
    Do update the forum reg your findings.
    Thanks and Regardas,
    Anto

  • HT4848 iMac crashed, trying to use Time Machine backup. In Restore From:it only offers Macintosh HD on ..... (grayed). There are backups listed below.

    iMac crashed, trying to use Time Machine backup. In Restore From:it only offers Macintosh HD on ..... (grayed). There are backups listed below. When I click on a current backup and click on continue I get a "Select a Destination" with Searching for disk, but nothing comes up.
    I am connected to my Passport if that helps, but I think that is where it is getting the backup list.
    Any help on how to proceed?
    Thanks,

    Thanks for your help on this. I was trying to restore from a new drive. The problem I have is that Time Machine will not let me do so, so far. 
    When I go into 'Restore from Time Machine Back up) I can access the Time Machine HD ok. But then when I go onto next page (Select a Back Up) the 'Restore From' option only has the greyed out name of my crashed HD (this seems wrong?). If I continue the process to erase starts and then stops, message says:
    An error occurred while adding a recovery system to the destination disk.
    it only seems to want me to back up to my crashed HD which I have no intention of using

  • There are no message servers maintained in the associated SLD Error/Problem

    Hi Experts,
    I developed a Web Dynpro in my Composition Environment 7.1 RS5 and I am facing some problems. I maintained SLD Data Supplier and SLD Used By Applications and they are OK. I did three different destinations SLD_Client and SLD_DataSupplier as HTTP (CE) and one more as RFC Destination type (Destination ABAP). All of them ping u201CSuccessfully connected to HTTP destination SLD_Client with response code 200. Content type text/htmlu201D. In my SLD Data Supplier Configuration the  collect and send data are completed duccessfully. In Jco RFC Provider I did one RFC Destination which I called CE1_PORTAL_EPD and is pointed to R3 and is running OK. Finally when I want to maintain my Jco Web Dynpro (WD_RFC_FLIGHTDATA_META) the next message appears:
    There are no message servers maintained in the associated SLD. Please contact your system administrator.
    I changed my services file which is in C:\windows\system 32\drivers\etc\ services  and add my port as:
    sapmsXYZ 3600/tcp # SAP system message port  System ID XYZ production, but the message is still appearing . What else is missing???
    + It is against Rules of Engagement to ask for points and solicit responses using points. +
    Thank you very much
    David Cortes
    Edited by: Bhavesh Kantilal on Dec 3, 2008 11:42 AM

    Thank you very much Suresh Pagadala, your answer has been very helpful.... I solved the problem, I had not patched the SLD Component.... in order to patch the CE must download the SLD component from....
    https://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=LIST&HEADER=&FUNCTIONBAR=&EVENT=LIST&ONR=01200314690200006722&NTYPE=T_CV_DELO&V=MAINT&TA=ACTUAL&U=S0004970077&AI=SWTYPSC|&AI=PECCLSC|OS&AI=PECU_OS|OSINDEP&AI=DELO|10005117&AI=PVNR|01200615320900001553
    Regards

  • My iPod Touch (5th generation) is not responding to my touch. There are also several colored lines in the background of my screen. Virus?

    Since my iPod isn't responding to my touch, I can't switch it off or restart it as I normally would. I've tried doing the hold-down-the-sleep-button-and-the-home-button-for-ten-seconds thing but when the Apple logo appears, it's either completely pink in color or there are these vertical colored lines in the background. When the lock screen reappears, sometimes it looks completely normal (but it still doesn't respond), or everything's blurred, or there are these weird colours in the background, or those lines I mentioned before, but most of the times, it's completely dark and I can onlu see this moving flash at the bottom of the screen (indicating the presence of the slide to unlock thing).
    My computer was recently reformatted because it had had a virus, so I'm worried my iPod has gotten the virus too. I have some data on there that I really can't lose. (I haven't backed up this data because my computer had been on the fritz for the past two weeks).
    Is taking it to an Apple Help Centre the only cure? (I purchased the item in March 2013; Is there any chance I can get it replaced for free?) I tried moving the photos from the device to my PC but it says there are no photos in my device. (I've moved my photos before when I'd forgotten my password and was about to reset it.)
    I would really like some advice ASAP because if it is a virus, the longer I keep it untouched, the more havoc it causes. i fear.

    I do not think talking to Apple will do more than the following:
    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • When adding a printer share within Print Management receive "There are no more endpoints available from the endpoint mapper."

    I've installed Server 2012 as a print server (Print server will be the only function of this server). I'm now trying to add printers. The first one I've added is a HP 2035 with the Windows update HP Universal PCL6 driver. If I chose to share the printer
    during the setup I receive "There are no more endpoints available from the endpoint mapper." If I choose not to share during the setup, it adds without any issues...until I launch Properties and attempt to share it. I'm finding it doesn't seem to
    matter what driver I use, whenever I share I end up with the same result. I've also tried using the PCL6 Universal Driver from HP, no change. I'e been researching this issue for hours without any change. By default, we disable firewalls on servers (Some TN
    thread suggested checking to ensure the firewall is disabled). Spooler isn't crashing. I've tried adding a few others printers, running into the exact same issue. Why is trying to share the printers causing this issue?

    I've seen some people state they get this error when disabling the Windows Firewall service.  I've never seen the error with the service disabled but it may be the replacement software interfering.
    If it's off start up the service and let us know the outcome.
    Alan Morris formerly with Windows Printing Team

  • I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    Moving a library: Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive.  Hold down the option (alt) key (shift on Windows) and open iTunes.  At the prompt to create or choose a library choose the copied iTunes folder.

  • HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

    Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

    nope all my songs are copied and organized into the iTunes library.

  • The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    Take it to an Apple Store or other service provider for testing.

  • Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

    Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

    No, Apple does not. What other companies might provide what you're looking for I don't know. Try searching the web for "karaoke software" or something similar.
    Regards.

  • There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

    There are electric charges coming out from the laptop when I touch it. It is just happened when the mac is connected to the power supply.

    http://reviews.cnet.com/8301-13727_7-57388858-263/ouch-my-mac-shocked-me/?tag=mn col;txt
    Best.

Maybe you are looking for