THERE APEPARS TO BE AN OLD LICENSE KEY IN FILE u0093C:\SAP LIC KEY\NSP.TXTu0094 (LO

Hello,
          i'm new to SAP apps,and i'm trying to download SAP Basis trial version,and i'm trying install SAP License,i'm getting this error" THERE APEPARS TO BE AN OLD LICENSE KEY IN FILE “C:\SAP LIC KEY\NSP.TXT” (LONG TEXT)". Please help.
Thanks
Rao

Hi Asif,
Run t-code SLICENSE.
and see whethe any license is installed or not?
Which is your SAP version??
Regards,
Payal

Similar Messages

  • How do I find my old License Key?

    I am trying to track down one of our old license keys for Crystal reports desktop designer V8.5.
    We are running software which uses crystal reports to print out transmittals.
    Due to a change in the company, the logo's on the reports need replacing. The only version of Crystal reports designer which is compatible is V8.5, which I have but the License for it was lost before I started working at this company.
    Would there be a database where the keys are kept?

    Hi Ryan,
    You can get license key from
    -Click on Help -> About Crystal Reports..
    -Try to find from Registry Editor:
    Click on Run->Type regedit ->
    Expand Software folder->Crystal Decisions-> search for Keycodes
    you can also try to log a incident for keycode:
    For a new key:
    Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key.
    If your Key code does not work
    You need create a customer message https://websmp107.sap-ag.de/message using component XX-SER-LIKEY-BOJ.
    Regards,
    Shweta

  • Transferring Coldfusion to a new server - Upgrade license; Can't find old license key HELP!!

         I am currently in the process of porting over my data from another server to a new server. 
    On that server I am running ColdFusionMX7 Standard and want to continue running it on the new one. 
    Coldfusion is currently loaded on the new server through a trial edition but when I try and enter the Serial Number I see on the Coldfusion on the server I am currently operating, it prompts me that "You have entered an upgrade license key (XXXXXX-XXXXX-XXXXX-XXXXX), which requires you to enter the license key of your previous version of ColdFusion."
    Do you have any advice on this?  Is there any way to find that old license on the old server?
    Thanks!

    Contact support by web chat.
    Mylenium

  • SAP license key error:  no valid license found:  cannot log into SAP GUI

    I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP.  Well, later I tried to log in again and was locked out.  After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now. 
    I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error.  I put a trace on it and appears it cannot read license file key.  I also tried to install another temp license, but that failed since no other previous valid license was found.  At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how.  SAP has not provided a solution yet.
    I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
    Has anyone else run into this issue?

    Yes, I wish it were that simple, but I cannot even bring up the logon screen.  SAP GUI returns a message, resource temporarily unavailable.  I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
    I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found.  I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well. 
    For NW2004s, is it even possible to install a digital license using cmd prompt?
    Ben

  • Removing old License Servers (SCP issues?)

    I've been tasked with cleaning up the list of "Known License Servers" that are found on our domain when running RD Session Host.
    I have several that shouldn't be there. I've checked in ADSI Edit/Configuration/Sites/Default Site/TS-Enterprise-License-Server and it only has my current (correct) server listed. The Terminal Server License Servers AD group only has the current server listed
    as well.
    I think the issue is old SCP connections. If I find the computer account in AD, (and select to view Users, Contacts, Groups and Computers as containers) and expand the computer account I can see TermServLicensing underneath the computer account. I suspect
    this is causing them to be discovered. Does anyone have any feedback or suggestions on if this could be my cause, and if so, is just Right-Click deleting the SCP the solution? Is there a better way to take care of deleting the old SCP?
    Thanks
    Sean

    Hi,
    Please go to the Remote Desktop Licensing website and check if old License servers are listed. If so, please try to remove them and see how it works.
    https://activate.microsoft.com/
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Is there a way of deleting old files when upgrading to Lion

    So I'm finally thinking about switching over from 10.6.8 to 10.7.5.  Normally, when I upgrade to a newer OS, it's usually when a newer OS than that comes out.  ie. Mountain Lion is out, so Lion would have seen it's issues and has been updated as much as it can.  Basically, 10.7.5 is the best Lion will ever get.  Hence why I'm willing to upgrade.  I'll admit, I'm lazy when it comes to having to reinstall everything, but because old OS extensions and kernels don't get deleted when you upgrade to newer OS, I usually install a clean OS, which means I have to reinstall all my apps.  I'm wondering if there's a way for all older OS system files that are not necessary anymore, to be deleted upon upgrading.  Or will Apple ever design an upgrade that will do so.

    Eric Shawn2 wrote:
    So I'm finally thinking about switching over from 10.6.8 to 10.7.5.  Normally, when I upgrade to a newer OS, it's usually when a newer OS than that comes out.  ie. Mountain Lion is out, so Lion would have seen it's issues and has been updated as much as it can.  Basically, 10.7.5 is the best Lion will ever get.  Hence why I'm willing to upgrade.  I'll admit, I'm lazy when it comes to having to reinstall everything, but because old OS extensions and kernels don't get deleted when you upgrade to newer OS, I usually install a clean OS, which means I have to reinstall all my apps.  I'm wondering if there's a way for all older OS system files that are not necessary anymore, to be deleted upon upgrading.  Or will Apple ever design an upgrade that will do so.
    Buy Lion, erase your disk and install.
    Pete

  • Is there a way to view old floppy disks running Maverick?

    Is there a way to view old floppy disks when running Maverick?

    While there are older usb external floppy drives available I seriously doubt there are any current drivers to support them. If it is the floppy's content you want then an older pre Intel Power PC capable of running Classic environment (or mac OS9) could utilize the external floppy drive. Also consideration has to be given to the capacity of the floppies as 400k and 800k are not read by most of the later drives which would include the usb ones.

  • Is there a way to remove old responses from the Acrobat Tracker?

    Is there a way to remove old responses from the Tracker if I have deleted the original sources? In other words, Acrobat.com and my desktop are out of sync.How I can get rid of any of these files.

    nvm. I found it.

  • Hyper-V 2012 R2. RemoteFx. "The remote session was disconnected because there were network problems during the licensing protocol. Please try connecting to the remote computer again."

    After a Installation from Windows 8.1/windows 7 everything works fine. For example  Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
    Hosts are not in a domain configuration. I tried it too but there was  no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
    Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
    Is there a bug or something. I tried it many times with the same error.
    Maybe someone can help me. 
    kind regards  
    Tobi

    Hi Tobi,
    Thank you for posting in Windows Server Forum.
    For a workaround, please try to perform the two steps.
    1. Do NOT enable RDP 8 on the Windows 7 SP1 VM.  You should install RDP 8 and update the ICs though.
    2. Change the connection setting on the client from "Automatically detect" to "LAN"
    Please check again below thread for information.
    a. "The remote session was disconnected
    because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
    (Please recheck answer by “dgeddes”)
    b. "The remote session
    was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
    Hope it helps!
    Thanks,
    Dharmesh

  • My computer was formatted but I need to access my old content on my itunes backups. Is there any way I can acquire these iTunes backup files ever again?

    My computer was formatted but I need to access my old content on my itunes backups. Is there any way I can acquire these iTunes backup files ever again?
    I tried recovery software but had no luck!

    You reformatted the drive in your computer. The backup files you want to access were overwritten when you re-formatted the drive. They are gone. There may be data recovery services that can get them back. Search google if you want. This has absolutely nothing to do with using an iPhone at this point. You deleted files on your computer...

  • Is there a way to recover old iMessages?  Or is there a way to track iMessages?

    Is there a way to recover old iMessages?  Are these messages held in the network somewhere?  If so, how easy is it to recover them?  I need to look up some messages for a file of mine.
    Thank You

    Look on the device.
    If they've been deleted off the device, the only hope of finding them would be to restore to a backup created prior to them being deleted off the device.

  • Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage

    Dear Support,
    Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage. I would like to switch this functionality off, because the key is malfunctioned and always pressed. I was able to switch off the functionality of this key in Windows system by deleting entries in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey. After this change, when somebody works in system the Firefox is not running is not launching all the time. But when I open the Firefox the setting in system is overwritten and when I am using it Firefox returns to the homepage instantly. I think because of this quick launch button. I tried to change settings in about:config like browser.startup.homepage, browser.startup.homepage_override, startup.homepage_override_url,… this is for Firefox version is 10.0.2
    Thank you
    Best Regards

    Hi,
    Thank you for your interesst.
    This internet button key is one of buttons located above the keyboard near the power button. What I have achieved to this moment was to stop it functionality in the system by clearing the entries in the fields Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17\ShellExecute and entry
    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7\Association that was http
    After these changes in registry the behavior of the button was suppressed, the Firefox stopped to start unexpectedly all the time – so in system it works. But the problem is still when I have opened Firefox. Every time when you want to surf in internet – the homepage is activated also unexpectedly. I wrote this post with intention to ask if there is a possibility to switch off the functionality of this quick launch button in Firefox. Because I assume Firefox overrides the system setup – this I have made in registry. I tried with some option changes in about:config but without success. And I know that for older versions of firefox was some option in about:config do disable_quick launch button. But in 10.0.2 I couldn't locate it.
    Thank you
    Regards
    Lukasz

  • Is there a way to access old multimedia messages that are no longer  in the message history?

    Is there a way to access old multimedia messages that are no longer in the message history?

    not unless you manually saved it to the sd card.

  • Is there a way to use old iphones without a sim card

    is there a way to use old iphones without a sim card?

    Yes but if it needs activating first then a Sim card must be inserted just during the activation process
    and can then be removed
    http://support.apple.com/kb/ht3406

  • Old key field FROMNUMBER is now non-key field

    Hi All,
    I am getting one issue with NRIV table.When I tried to activate this table from se11 it is giving error as
      Program start============================================================
      Mass activation
      =========================================================================
      Process..................: presap_4
      User.....................: ABAP1
      Date, time...............: 19.02.2007, 12:50:33
      Platform.................: CUSTOMER-PRE(620)/ORACLE/WindowsNT/presap
      Tool.....................: SE11_OLD/RADMASG0
      Log......................: T, ABAP120070219125033
      Program parameters:
      Input medium..............: Direct object entry
      Activation method.........: Activ
      Chk. mode.................: O
      Version to be activated...: M
      Versions to Be Deleted....: Delete only active versions
      Lock against paral. exec..: Shared
      Parallel mode.............: Switched off
      =========================================================================
      Start phase 001 **********************************************************
            Activation of objects
    Activate objects at level 1
        Old key field FROMNUMBER is now non-key field
      Structure change at field level (convert table NRIV)
            Activation of objects
      End phase  001 ***********************************************************
               Activation of objects
    Activate objects at level 1
           Old key field FROMNUMBER is now non-key field
         Structure change at field level (convert table NRIV)
               Activation of objects
         End phase  001 ***********************************************************
         Start phase 002 **********************************************************
               Final log
         Following objects not activated/deleted or activated/deleted w. warning:
         Table NRIV could not be activated
         (E- Structure change at field level (convert table NRIV) )
           Final log
    End phase  002 ***********************************************************
    Start phase 003 **********************************************************
           Statistics on activated and deleted objects
    Number of objects to be activated............:  1
    Objects not activated........................:  1
    Activated objects with errors in dependencies:  0
    Objects activated with warning...............:  0
    Successfully activated objects...............:  0"
    Can any one help in this.It is bit urgent.
    Thanks,
    Krishna

    Hi Brend,
    Thanks for the reply.
    But could you tell me how to convert this table and what to convert.
    Posibble could you give this with step by step, we are struck with number range issues with this problem and needed with critical.
    Thanks for the help in advance.
    Krishna

Maybe you are looking for