There are missing files for numbers.

How do I find files are missing needed to launch numbers? Where is the iwork launcher?

The DVD versions of iWork install some shared resources in an iWork folder under Application Support in the Computer Library. If you try to copy the application to another computer without using the installer, you get an error message about these missing files.

Similar Messages

It ask me to up date new itunes and so i told yes and now it keep telling there are missing files

it ask me to up date the new itunes so i did and now it telling me there are missing files

iTunes for Windows: Missing MSVCR80.dll

Is there a setting such that the application closes (quits) when the (last) file is closed? Why does the application remain active when there are no files for it open?

I honestly did try to find my own answer, but cannot. Not sure why a simple question would have its answer so difficult to find. I'd just like the application to simply close after the last file is closed. It seems strange to have the application remain active. Thanks for your help.

It's also a bit strange that even though I searched throughout the community for questions like this......so that I wouldn't take up space for something already discussed........that immediately after I posted my question, the "
More Like This" side window comes up that describes questions just like mine.
So, sorry to have bothered anyone with having to read another duplicate question. I see that the answer to my first question is "No", and there's likely not a good answer for "Why".
Thanks anyway.

HT5361 Been using mail forever and only with my gmail account. All of a sudden, all my inbox mails are missing except for anything after yest night. I log into gmail on safari and everything is there but not on my mac or iphone in mail

Been using mail forever and only with my gmail account. All of a sudden, all my inbox mails are missing except for anything after yest night. I log into gmail on safari and everything is there but not on my mac or iphone in mail

Same problem in 8.1.3
Apple help!

HELP! "There are 309 files that don't belong in the project"

I needed to reformat my OS, so I backed up all my data onto DVD+RW's. (Verbatim brand.) including my imovies. I copied the entire "blahblah.iMovieProject" folder onto the DVD, then copied it back onto the drive after the reinstall. But now when I click on the project, it prompts me about this:
"There are 309 files that don't belong in the project"
and then this:
"There are 160 stray clip files in the project folder. Would you like to put them on the clips pane?"
After I click on "Leave Files Alone" for both of them, (versus move to trash, and Move files to clips pane, respectively), The project opens completely BLANK.
Oh great. Please inform. Am I out of luck?
Oh, btw, it also created like 10 versions of each photo in the "Media" folder. ick. what happened?...
g5 Mac OS X (10.3.9)

Also, one more thing! Now that this has happened, even after I quit and restart the computer, upon opening the application, instead of starting out with a brand new project, the same prompts appear, and then leaves me with that seemingly corrupt project which is blank.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

J2ee1.4 installation error - there are no files requiring installation

hi all,
i downloaded the j2ee sdk 1.4 bundle and installed successfully on my suse 8.2. however when i tried doing it on another suse 8.2 machine using the same bundle i got an error that says :
There are no files requiring installation - here's all the output -
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Launching Java(TM) 2 Runtime Environment...
Error: There are no files requiring installation.
Deleting temporary files...
i'm new to j2ee so plz, if any one knows how to get around this, let me know.
thanks,
rich

This message will be issued if files necessary for installation are not found once the self-extracting executable extracts its content. If you successfully used same distribution file to install on another machine, it is very likely that the distribution file got corrupted while being moved from one system to another.
If you use ftp to transfer files between systems, make sure that you transfer file in binary mode.
If you don't have the original distribution file anymore, you might need to download the distribution again.

There are no notifications for your produce

Hi
I have now Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
Do you guys have this experience and solution?
Thanks a lot

Tullip wrote:
Hi
I have now Lap VIEW 2013 and I tried to dowload LabVIEW Control Design and Simulation Module after following the process a message shows that "There are no notifications for your products". Even if I have closed window firewall and setted the files enables to install in my computer. I still was able to get this function in my labview.
Do you guys have this experience and solution?
Thanks a lot
Hi, your wording isn't quite clear to me. Does everything actually work? The "No notifications..." message is simply telling you that your stuff is up to date.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

There are no hierarchies for this InfoSource in source system

Hello Gurus,
We have recently created an extractor for the Country hierarchies, these are the steps we took:
SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
We informed the infoobject 0country and the characteristic KMLAND.
We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
Are we missing something in the process so that we may see the available hierarquies?
Thanks!!! Points will be rewarded.

Hi Sumit,
You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
Thanks for your help!
Regards,
Elder

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not

Mac won't let me move files into a folder bc it THINKS there are duplicate files - but they're not. There are hundreds of what it thinks are duplicates. How can I get it to let me put them all into a folder and create unique names? If I do one file at a time, it gives me the option to keep both files. But not when I am moving hundreds at a time.

A reply to an old problem, but I couldn't find this solution anywhere. I had the same problem when I moved my iTunes library to an external drive. As Apple recommends, I used File > Library > Organize Library > Consolidate Files to copy my music files from my overstuffed hard drive to the external drive. Copying went fine for a while, adding about two-thirds of my files to the new drive without incident. Then I got the big stop sign with the error message: "Copying files failed. The disk could not be read from or written to."
This turned out to have nothing to do with either the hard drive or the external disk. I had a bad file in my music library that was shutting down the consolidation process. Unfortunately the error message says nothing about which file may be the culprit. All I could think to do was to go back to my original library in iTunes and sort by Artist, select all cuts with artists beginning with A, right click and select "Consolidate Files". Then do the same with B artists, etc. Proceeding this way, files resumed copying but when I got to the "S" selections, the consolidate process failed again. Then I selected smaller and smaller batches until the problem file was identified. Removed it from my library and then Consolidate worked fine through the rest of the library. Problem solved.
I spent several days working through this; hope I can save someone else the time.

I have a avchd file approx 15min in lenght on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files,

I have a avchd file approx 15min in length on a sdhc card. My camera says there is one file. When I put the card in the PC ( Win8.1), the PC says there are 2 files, one is 11mins approx and the other is 4mins long approx. If I bring these files into premier CS6 they are both identical length of 15mins What is going on here??

Hi and thanks... kinda getting there but still unsure WTF. I have found that the files are split at 197gb (consistent with other uses on the web), however when I import them into premier cs6 they are 15mins and 29secs, on the SDHC card the file size is 197gbfor the larger, then the shorter one is 634mb. BUT when I import both files into premier cs6 they are identical size and length both are 15.29.19 or 15mins 29sec and 19frames. I have put the card in the camera and run that as an external and it sees the files as 2 split files while if I view the files straight off the camera there is only 1 file. Why it says there are 2 files of different sizes and premier imports them as 2 identical files is a mystery to me! I have also gone back and looked at some archived footage on another card and yes there was one split file when the size exceeded 197gb but of course when I imported that footage nothing was missing because cs6 imported the file as a complete 'take' of the whole length

There are missing letters when i print on 8600 officejet pro

When i am printing a document there are missing letters. I.E, on the word notice, the n is missing

Hey helmut,
You can also try the ePrint method listed here if you can't get AirPrint working:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en &product=4116838&tmp_track_link=ot_search
The application HP home and biz app is free in the app catalogue!
Hope this helps.
I work for HP.

On iOS 7.0.2, after web (OTA) installation there are two icons for the app on the home screen; one is invalid.

Hello,
I have filed a bugreport, but I am curious if anybody else has noticed this.
Summary:
Icon that was displaying progress of installation stays on screen next to normal icon and it is impossible to delete it or start the app with it.
Steps to Reproduce:
1. Full factory reset of iPhone with iOS 7.0.2
2. Open web page with link for OTA installation.
3. After install is finished there are two icons for the app.
Expected Results:
Icon that was displaying the progress should disappear after installation.
Actual Results:
Icon that was displaying the progress stays on screen is not usable and cannot be deleted.
Version:
7.0.2
Notes:
Configuration:
Server used to serve the page with installation files is "Server" app on MacBook Pro with Mountain Lion.
The same happens if other servers are used; Ubuntu 12.04 LTS.

Hello,
I have the same problem!
Any idea?
Thanks.

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

Thanks for responding, I downloaded the Creative Cloud Installer which is sitting under Devices in my Finder and then installed the Ai app which is appearing under Applications in the finder. I notice that in the launch tutorial there is the Adobe Creative Cloud sitting in the Apps folder above Ai - I don't have this. Hmm what to do?

Warning : There are JAVA errors for this object .This wizard will be read

Hi All,
I am getting this error when trying to open the standard VO or AM's .
Warning : There are JAVA errors for this object .This wizard will be read only until they are corrected.
Please help me on this.
Thanks

Decompile the VOImpl and AmImpl class files and keep the .java files in myprojects folder under appropriate package structure and try.
-Anand

There are missing files for numbers.

Similar Messages

Maybe you are looking for