There are multiple wifi connections at my location. how do i specify which one to use

At my work we have our hotspot that is my preferred connection when in our space. There are common areas in the building that has free wifi such as the lunch area and the gym. How can i make my work hotspot the prefered connection since they can over lap?

Let me explain more:
At my desk, in conference room and in break room I can see hotspots Work and Freebee. Freebee signal strength is much lowerl I want to use Work. When i go to breakfast / lunch as the building cafeteria I see Freebee. When i workout in the gym and want to listen to streaming radio I see Freebee. Is the iPhone smart enough for me to specify rules such as signal strength or preferences as to which hotspot to use

Similar Messages

There are two CDC methods - Source based CDC and Target based CDC which one

There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
If there is any document available which compares both and provides any info on performance etc, will be helpful.
thank you for the helpful info.

LIke Suneer mentioned CDC is for better performance.
Following link would be helpful.
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
Thanks,
Arun

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

I am in a hotel in Panama and although I have sharing completely switched off there are still computers connecting. How do I stop others sharing?

I am in a hotel in Panama and although I have sharing completely switched off there are still computers connecting. How do I stop others sharing?

I think you are seeing sharing networked computers in your sidebar.
That doesn't mean they are connecting to you, or even that you can connect to them (they are likely pass word protected). It's a bit like looking around your room and seeing a bunch of computers on tables... you can see them, but that doesn't mean you have access to them.
It's also like seeing a list of WIFI networks in your Airport menu window - just because they're listed doesn't mean you can connect to them, or they to you.
Does that make sense?

Suddenly there are multiple copies of the same ibook on my bookshelf. How do I get rid of the extra copies?

I have purchased several ibooks from the bookstore over the last several months. Suddenly there are multiple copies of several titles. Not coincidentally I am have trouble downloading newly purchased titles. I am receiving a message that there is insufficient space when there is, in fact, 6GB+ available. How to proceed?

Quit iBooks completely and reboot the iPad.
From your home screen -Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the iBooks app icon. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Go back to iBooks and see if the duplicates have disappeared.

Getting "There are no speakers connected to the AirPlay device " device-name "

For the past several years, I have had a stereo receiver hooked up to and airport express to stream music wirelessly from my iMac to stereo speakers. All of a sudden, I started getting the message "There are no speakers connected to the AirPlay device "<device-name>". So, what changed, we recently changed ISP from Verizon DSL to RCN cable, I changed my Apple ID (due to the ISP change), I upgraded all computers to OS X Lion, and I have a new iPhone5. I can't tell you exactly when during the process things went bad, but I can tell you what I have done to solve the problem:
I checked that my devices are configured correctly. The network layout is as follows: I have an Airport Express on the 3rd floor of my house, along with the iMac containing the iTunes library, I have an Airport Express on the 2nd floor acting as a repeater, I have an Airport Express on the 1st floor acting as a repeater and connected to my stereo receiver and 4 speakers. I control which set of speakers is "on" via the receiver.
I checked that I can get sound out of the speakers via the receiver by selecting FM and got radio to play, so I believe the receiver is ok.
I swapped this receiver with another receiver and got no sound and still the message "there are no speakers connected..."
I moved the Airport Express from the AUX port to the TAPE2 port to check the port. Still no sound.
I checked the cable with a Bose box and got sound, so I believe the cable is ok.
I plugged a headset directly into the Airport Express and got no sound.
I swapped the 2nd floor and 1st floor Airport Express units, reconfigured the new 1st floor unit to turn on Air Play and still get no sound and the error message.
I am controlling the music using the Remote app on my iPhone. I have configured the new device to use this library.
I am tired, confused and at a loss. What can be going on here?

All that I can suggest is that you perform a Factory Default Reset on the Express to wipe the current settings and set it up again.
If you are still having problems after that, you need to take the Express to an Apple Store or Apple Servicer near you to let them have a look at what I suspect is a defective AirPort Express.
Resetting an AirPort Base Station or Time Capsule FAQ

Hello. When I connect my iPad, to my PC, there are 3gb taken up by "other". How can I free this up? Thanks.

Hello. When I connect my iPad, to my PC, there are 3gb taken up by "other". How can I free this up? Thanks.

Hi Westindiandiva,
Depending on your current configuration, a certain amount of storage marked as Other on your iPad may be normal. For more information about managing storage on your iOS device, you may find the following article helpful:
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Regards,
- Brenden

PCO 2.1 Error : there are multiple root elements Line 6, position 2

HI all,
I am getting an error while adding Destination for Notification.
On the Destination Tab, I am able to create MII System as Destination. And expanding the newly created Destination, i can see a child node 'Destination'. While clicking on this child node, i am getting an error as "there are multiple root elements Line 6, position 2"
Can anybody please help.
Regards
Muzammil

Hi,
While configuring MII Server details, instead of IP address of MII server, we gave domain name and it started working.
Regards
Muzammil

Error in WebServices Consumption - There are multiple root elements

hi,
I am working on consuming webservice which has a WSDL to get the RouteDetails with a structure like:
<Source>
<HouseNumber>1</HouseNumber>
<Street>XYZ</Street>
<City>Hyderabad</City>
<Country>India</Country>
<PostalCode>500018</PostalCode>
</Source>
<Destination>
<HouseNumber>2</HouseNumber>
<Street>X1Y1Z1</Street>
<City>Bangalore</City>
<Country>India</Country>
<PostalCode>500067</PostalCode>
</Destination>
When I am calling the method RouteDetails of the proxy I created, I am getting the error 'There are multiple root elements in line 1 column 178 and the column is indicating <HouseNumber> in <Destination> node.
Please let me know how to overcome this.
Thanks for the help
Githa

Its now resolved. Thanks,
Githa

Exchange 2007 Management shell issue: "There are multiple objects matching the identity "servername" Please specify a unique value"

I thought this would be an easy answer to an issue I'm facing, but there's a problem executing the solution.
I'm running Exchange 2007 in a clustered SCC configuration. The clustered resource is called "DENBURYMAIL." I want to give my account full mailbox access rights to all the mailboxes in this resource/database.
I believe I found the solution to this at
http://technet.microsoft.com/en-us/library/bb310792%28EXCHG.80%29.aspx (about halfway down the page) the instructions read as follows:
==============================
Q: I have a third-party messaging application that requires full access to each user's mailbox. With Exchange Server 5.5, we grant a special account the Service Account Admin permissions, and then tell the application to use this account. How
can I achieve similar functionality in Exchange 2007?
A: Exchange 2007 security works differently from that of Exchange Server 5.5. In fact, Exchange 2007 does not use a site service account. Instead, all services start as the local computer account.
If your logon account is the Administrator account, a member of the root Domain Administrators, a member of the Enterprise Administrators groups, or a member of the Exchange Organization Administrators role, you are explicitly denied access to all mailboxes
that are not your mailbox, even if you have full administrative rights over the Exchange system. All Exchange 2007 administrative tasks can be performed without having to grant an administrator sufficient rights to read other people's mail.
You can achieve the results that you want in the following ways, but do so only in accordance with your organization's security and privacy policies:
In the Exchange Management Shell, use the following command to allow access to all mailboxes on a given mailbox store:
Add-ADPermission -identity "mailbox database" -user "serviceaccount" -ExtendedRights Receive-As
=============================
But when I run the command (Add-ADPermission -identity "denburymail" -user "matthew.fazio" -ExtendedRights Receive-As) I get an error telling me that "There are multiple objects matching the identity "DENBURYMAIL." Please Specify a unique value."
I'm not sure what's causing this-- why are there "multiple objects?" Is this a problem due to operating in a clustered environment?
Any assistance would be appreciated!

It may not be specific enough for the command to understand you.
Try this:
Get-MailboxDatabase -Server <servername> | Add-ADPermission -user "matthew.fazio" -ExtendedRights Receive-As

HT5188 Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.

Nearly every time I buy a VPP app and download the spreadsheet there are multiple redemption codes that say that they are invalid! HOW can a code I am getting directly from apple be invalid!!!!!!!! Seems like your system has A LOT of flaws.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

MDS-00010: DuplicateRefException. In document {0} there are multiple elemen

I am getting this error and I don't know why
MDS-00010: DuplicateRefException. In document {0} there are multiple elements with the same ID {1}.
Cause: Either an element was being added with an ID that already existed within the document, or a preexisting document had multiple elements with the same ID.
Action: Change the ID of the elements so that there is no ID duplication.
Level: 1
--- Level 1: Detail 0 -----
(oracle.mds.exception.MDSRuntimeException) MDS-00010: DuplicateRefException.
In document /elechead/entities/PollingDivisions.xml there are multiple elements with the same ID PollingDivisions.
the entity pollingdivisions looks fine, correct unique primary key
I get this error when trying to run a module that has been built using the adf business services wizard (created entities, view objects and readonly objects)

I guess you get this error if you haves duplicate component ids one one of your pages. MDS its the meta data service which is used to store information about a jsf page in a special repository.
Timo

On a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.

Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
KOT

There are multiple wifi connections at my location. how do i specify which one to use

Similar Messages

Maybe you are looking for