There are no more endpoints available on Azure Website

I am just trying to setup a simple web app that pings a IP address and host it on Azure Websites. I have a standard website (not the free tier) and I have web sockets turn ON.
I am just sending a simple ping using the system.net.networkinformation.ping part of the .net api. It runs fine within VS.NET on my machine when deploying local. however when I publish to my azure website, and run it there I get
There are no more endpoints available from the endpoint mapper
I've tried looking on the azure configuration, the only obvious thing I noticed was making sure websockets was turned on. (and it is)
Any ideas? im sure it is some simple configuration and im just missing something? or are there certain things they do not allow from a Azure Website?
Thanks a bunch for looking at my question!
--Ryan

Hi,
I am afraid, Azure website doesn't support ping, if you need Inbound & Outbound ping, please vote this feedback:
http://feedback.azure.com/forums/217313-networking-dns-traffic-manager-vpn-vnet/suggestions/3346609-icmp-support-for-azure-websites-roles-cloud-serv
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

When adding a printer share within Print Management receive "There are no more endpoints available from the endpoint mapper."

I've installed Server 2012 as a print server (Print server will be the only function of this server). I'm now trying to add printers. The first one I've added is a HP 2035 with the Windows update HP Universal PCL6 driver. If I chose to share the printer
during the setup I receive "There are no more endpoints available from the endpoint mapper." If I choose not to share during the setup, it adds without any issues...until I launch Properties and attempt to share it. I'm finding it doesn't seem to
matter what driver I use, whenever I share I end up with the same result. I've also tried using the PCL6 Universal Driver from HP, no change. I'e been researching this issue for hours without any change. By default, we disable firewalls on servers (Some TN
thread suggested checking to ensure the firewall is disabled). Spooler isn't crashing. I've tried adding a few others printers, running into the exact same issue. Why is trying to share the printers causing this issue?

I've seen some people state they get this error when disabling the Windows Firewall service. I've never seen the error with the service disabled but it may be the replacement software interfering.
If it's off start up the service and let us know the outcome.
Alan Morris formerly with Windows Printing Team

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.

Look in the HD/Applications folder.

There are no traffic sources available to this Database Firewall

Hi, Experts, I want to create " Enforcement Points" in DBforewall. But I get message :"There are no traffic sources available to this Database Firewall, You will not be able to use the system in its current state. Please install more network interfaces and reinstall the Database Firewall software. "
I have two netwotk cards. one is for DBFW access, one is for capture network trafic. Any one can help me?
#ifconfig
eth0 Link encap:Ethernet HWaddr 00:1F:16:2D:77:9D
inet addr:10.182.?.? Bcast:10.182.207.255 Mask:255.255.254.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20991 errors:0 dropped:0 overruns:0 frame:0
TX packets:8187 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2706212 (2.5 MiB) TX bytes:6313332 (6.0 MiB)
Memory:f2600000-f2620000
eth1 Link encap:Ethernet HWaddr 00:1B:8C:25:19:3B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:150859 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:25953197 (24.7 MiB) TX bytes:0 (0.0 b)
Interrupt:122
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8863 errors:0 dropped:0 overruns:0 frame:0
TX packets:8863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6188256 (5.9 MiB) TX bytes:6188256 (5.9 MiB)

I think the problem is that as the error message says, you don't have enough network interfaces available.
The installation process creates a network bridge and therefore you need 3 network interfaces: eth0 ist for management access, eth1 and eth2 are the ports for the bridge (an IP will not be assigned for these two interfaces) and at last the br0 interface. When you don't provide enough interfaces during the installation process, the bridge will not be configured and this could be the problem.

There are no active responsibilities available for this user

Hi Guys...
I am not technical person... but wanted to if anybody has experienced the following problem:-
When logging into any account i get the following message:- There are no active responsibilities available for this user
No i have looked the threads posted and most advise to run the WF_SYNCHRONIZE_LOCAL_TABLES concurrent request.. if i run this through toad or UNIX as i can’t get into forms i always seem to get the following message which could be playing a part in my initial problem.....ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
When i also query the following table Fnd_User_Resp_Groups i also get the following message: ORA-00600: internal error code, arguments: [ktsircinfo_num1], [9], [33], [52844], [], [], [], []
any help would be most welcome......
Bal

Is the system in maintenance mode, by any chance ? You put the app in maintenance mode when applying patches. If you connect as the apps database user, what does this sql statement return ?
select fnd_profile.value('APPS_MAINTENANCE_MODE') from dual;
MOS Doc 400151.1 - After Login Receive Error: 'There are no active responsibilities available for this user'
If the system is not in maintenance mode, you only option would be to open an SR
HTH
Srini

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

After apple wiped my hard drive, my computer no longer recognizes my iphone 4. It will charge, but doesn't show up in my sidebar or in itunes. My computer says there are no software updates available. I'm running OSX 10.5.8 and itunes is 10.3.1.

HT1338 My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

My iTunes won't let me connect my iPhone because it says I need an updated iTunes, but when I try to download the new iTunes, it says that my Mac software (10.5.8) is too old. However, there are no software updates available. What can I do?

It depends on what iPhone you have.
If it's an iPhone 4S or earlier, click here.
If it's an iPhone 5, you need to buy a Mac OS X 10.6 DVD, and that requires an Intel Mac with at least 1GB RAM.
(73384)

Kindly let me know if there are special discount offers available for IBM employees ?

Kindly let me know if there are special discount offers available for IBM employees ?

Many companies have EPP (Employee Purchase Programs) with Apple. You need to check your benefits programs offerred by IBM. It will basically be a URL to an EPP login page for the Apple Store.
NOTE: I do not think there is any discount on iPhones.
I have observed that the discounts tend to be around 8% on Pro equipment and 6% on consumer products. But some items the discounts vary depending on the product. And in some cases there is no discount.
Again, check with your IBM benefits.

OSD Task Sequence fails with "There are no task sequences available for this computer"

Let me preface this by saying that I have read at least 100 forum posts with people having similar issues. However, none of the solutions in those
posts have worked for me.
The Problem: SCCM 2012 R2 will not image unknown computers.
The task sequence gives the error "There are no task sequences available for this computer." As soon as that error occurs, SCCM places an Unknown entry into the All Systems collection. I have been imaging unknown computers, without fail, for
4 months and no environmental changes have been made. NOTE: I am using USB media, not PXE.
What I've Tried:
Checked for duplicate SMSBIOS GUIDS in the console, none.
Checked for duplicate MAC Addresses in the console, none.
Checked for expired certificates, none.
Recreated Boot Media, twice.
Deleted the Unknown entry and retried, SCCM just recreates the Unknown entry.
Deleted all of my task sequence deployments, and then redeployed them each to All Systems (Only Boot Media and PXE) and to Unknown Systems (Only Boot Media and PXE)
I have also ran the following in the SQL Server Management Studio;
SELECT
* FROM
ResPolicyMap WHERE
machineid = 0 and
PADBID IN
(SELECT
PADBID FROM PolicyAssignment
WHERE BodyHash
IS NULL)
No result
Select
* From
vMacAddresses Where
MacAddresses = '00:00:00:00:00:00'
This displays an entry for every time that I have tried to image the unknown machine attached to the MAC Address with a different ItemKey and SMS_Unique_Identifier for each entry.
Added the machine manually using Import Computer Information, immediately recognized the Task Sequences that I have advertised to the All Systems collection.
Any and all assistance is welcome, I am going on the third straight day of dead ends. Below I have tried my best to post the entire SMSTS Log;

LOGGING: Finalize process ID set to 744
==============================[ TSBootShell.exe ]==============================
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Debug shell is enabled
Waiting for PNP initialization...
RAM Disk Boot Path: MULTI(0)DISK(0)RDISK(0)PARTITION(1)\SOURCES\BOOT.WIM
WinPE boot path: C:\SOURCES\BOOT.WIM
Booted from removable device
Found config path C:\
Booting from removable media, not restoring bootloaders on hard drive
C:\WinPE does not exist.
C:\_SmsTsWinPE\WinPE does not exist.
Executing command line: wpeinit.exe -winpe
The command completed successfully.
Starting DNS client service.
Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
The command completed successfully.
==============================[ TSMBootStrap.exe ]==============================
Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:C:\
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL'
Current OS version is 6.2.9200.0
Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH
Failed to open PXE registry key. Not a PXE boot.
Media Root = C:\
WinPE boot type: 'Ramdisk:SourceIdentified'
Failed to find the source drive where WinPE was booted from
Executing from Media in WinPE
Verifying Media Layout.
MediaType = BootMedia
PasswordRequired = false
Found network adapter "Intel(R) Ethernet Connection I217-LM" with IP Address XXX.XX.XXX.XXX.
Running Wizard in Interactive mode
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Activating Welcome Page.
Loading bitmap
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
Spawned thread 1008 to download policy.
Entering TSMediaWizardControl::GetPolicy.
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00'
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00'
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
Setting LogMaxSize to 1000000
Setting LogMaxHistory to 1
Setting LogLevel to 0
Setting LogEnabled to 1
Setting LogDebug to 1
UEFI: false
Loading variables from the Task Sequencing Removable Media.
Loading Media Variables from "C:\sms\data\variables.dat"
Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL'
Setting SMSTSMP TS environment variable
Setting _SMSMediaGuid TS environment variable
Setting _SMSTSBootMediaPackageID TS environment variable
Setting _SMSTSBootMediaSourceVersion TS environment variable
Setting _SMSTSBrandingTitle TS environment variable
Setting _SMSTSCertSelection TS environment variable
Setting _SMSTSCertStoreName TS environment variable
Setting _SMSTSDiskLabel1 TS environment variable
Setting _SMSTSHTTPPort TS environment variable
Setting _SMSTSHTTPSPort TS environment variable
Setting _SMSTSIISSSLState TS environment variable
Setting _SMSTSMediaCreatedOnCAS TS environment variable
Setting _SMSTSMediaPFX TS environment variable
Setting _SMSTSMediaSetID TS environment variable
Setting _SMSTSMediaType TS environment variable
Setting _SMSTSPublicRootKey TS environment variable
Setting _SMSTSRootCACerts TS environment variable
Setting _SMSTSSiteCode TS environment variable
Setting _SMSTSSiteSigningCertificate TS environment variable
Setting _SMSTSStandAloneMedia TS environment variable
Setting _SMSTSSupportUnknownMachines TS environment variable
Setting _SMSTSTimezone TS environment variable
Setting _SMSTSUseFirstCert TS environment variable
Setting _SMSTSx64UnknownMachineGUID TS environment variable
Setting _SMSTSx86UnknownMachineGUID TS environment variable
Root CA Public Certs=
Missing root CA environment variable from variables file
Support Unknown Machines: 1
Custom hook from X:\\TSConfig.INI is
No hook is found to be executed before downloading policy
Authenticator from the environment is empty.
Need to create Authenticator Info using PFX
Initialized CStringStream object with string: 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A;2014-07-16T18:15:39Z.
Set media certificate in transport
Set authenticator in transport
CLibSMSMessageWinHttpTransport::Send: URL: XXXXXXXXX.XXXXXX.com:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA
Request was successful.
Default CSP is Microsoft Enhanced RSA and AES Cryptographic Provider
Default CSP Type is 24
New settings:
site=XXX,XXX, MP=http://XXXX.XXXX.com, ports: http=80,https=443
certificates are received from MP.
Unknown machine GUIDs: 774b17a2-6eeb-44bc-9c94-ce9081f5fe4c 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
MP specific X86 unknown machine GUID is received at run time
MP specific X64 unknown machine GUID is received at run time
Getting MP time information
Set authenticator in transport
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 406, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Current time: 2014-07-16 18:15:39.787 TZ:Pacific Standard Time Bias:0480
Current time zone info: 480, Pacific Standard Time, [0 0 0 0 0 0 0 0], 0, , [0 0 0 0 0 0 0 0], 0
Adjusting the system time: -14400.551 seconds
Time zone info set to: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
New time: 2014-07-16 14:15:39.235
Current time: 2014-07-16 14:15:39.231 TZ: Bias:0300
Downloading policy from http://XXXX.XXXX.com.
Initializing HTTP transport.
Setting URL = http://XXXX.XXXX.com.
Setting Ports = 80,443.
Setting CRL = false.
Setting Server Certificates.
Set authenticator in transport
Setting Media Certificate.
Preparing Client Identity Request.
Setting transport.
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Setting site code = XXX.
Can not find DeploymentType in file TsmBootstrap.ini or the file doesn't exist. This is not running on Windows To Go.
Setting SMBIOS GUID = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.
Adding MAC Address XX:XX:XX:XX:XX:XX.
Executing Client Identity Request.
Requesting client identity
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 415, uncompressed size 2460.
-120
Server time zone info: 300, , [0 11 0 1 2 0 0 0], 0, , [0 3 0 2 2 0 0 0], -60
Client Identity:
Netbios name:
Client GUID = , Netbios name = , State = Known
Using unknown machine GUID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
GetSystemEnclosureChassisInfo: IsFixed=TRUE, IsLaptop=TRUE
Hash computed from CSP: Microsoft Enhanced RSA and AES Cryptographic Provider, AlgID: 32772, HashSize: 20
Computed HardwareID=2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Hardware ID: 2:4AC96CD5003991BC201B7AC01FBC88E592C3E2BE
Preparing the Client DDR Message
Setting SourceID = 1F53C44B-1AE9-4CAF-8ADA-5ED28DC8FF9A.
Sending the Client DDR message.
Sending Report
<Report><ReportHeader><Identification><Machine><ClientInstalled>0</ClientInstalled><ClientType>1</ClientType><Unknown>1</Unknown><ClientID>GUID:26717327-194f-4cd6-90ba-309998c058f2</ClientID><ClientVersion>5.00.0000.0000</ClientVersion><NetBIOSName>Unknown</NetBIOSName><CodePage>437</CodePage><SystemDefaultLCID>1033</SystemDefaultLCID></Machine></Identification><ReportDetails><ReportContent>Inventory
Data</ReportContent><ReportType>Full</ReportType><Date>20140716141539.000000+000</Date><Version>1.0</Version><Format>1.1</Format></ReportDetails><InventoryAction ActionType="Predefined"><InventoryActionID>{00000000-0000-0000-0000-000000000003}</InventoryActionID><Description>Discovery</Description><InventoryAc
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
Submitted new client identity: GUID:26717327-194f-4cd6-90ba-309998c058f2
Preparing Policy Assignment Request.
Setting transport.
Setting site code = XXX.
Setting client ID = 74f16942-dd75-437f-8c4b-2a5de4d0e5e5.
Setting site signing Certificate.
Setting SiteSigningCertificateContext
Executing Policy Assignment Request.
Sending RequestAssignments
Setting message signatures.
Setting the authenticator.
CLibSMSMessageWinHttpTransport::Send: URL: XXXX.XXXX.com:80 CCM_POST /ccm_system/request
Request was successful.
::DecompressBuffer(65536)
Decompression (zlib) succeeded: original size 274, uncompressed size 662.
Request client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Response client ID: 74f16942-dd75-437f-8c4b-2a5de4d0e5e5
Retrieving Policy Assignments:
Successfully read 0 policy assignments.
Retrieving collection variable policy.
Found 0 collection variables.
Retrieving machine variable policy.
Found 0 machine variables.
Setting collection variables in the task sequencing environment.
Setting machine variables in the task sequencing environment.
Exiting TSMediaWizardControl::GetPolicy.
WelcomePage::OnWizardNext()
Loading Media Variables from "C:\sms\data\variables.dat"
no password for vars file
No assigned task sequence.
Setting wizard error: There are no task sequences available for this computer.
Skipping Confirmation Page.
Skipping Task Sequence Selection Page.
Skipping Variables Selection Page.
Skipping Resolve Progress Page.
Activating Finish Page.
Loading bitmap
Executing command line: X:\windows\system32\cmd.exe /k
The command completed successfully.
Successfully launched command shell.

I just dowload and pay the new LR6. I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

thank you very much!
everything's allright
bye

There are no stack configurations available in the Maintenance Optimizer

Hello,
I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0.
I have downloaded the EHP1 and cpoied them into the "EPS\in" directory.
When I press the u201CStack Configurationu201D button, I get a pop-up that says, "There are no stack configurations available in the Maintenance Optimizer".
Does it require any files like .XML to load the files? Please let me know your suggestions.
Thanks,
Niranjan.

what happened to us was we did not download the upgrade programs for EHP1. Make sure you download both SPs in note 1169247. The first one has the SPs and upgrades SPs for Solman 7.0 to EHP1. The second download for the SPs for EHP1).
Also, we did it manually without the using the button 'stack configuration. Hope this help.
(Supp Packs and Upgrade SPs for Solman 7.0 to EHP1)
SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-20 (07/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
(Support packs for EHP1)
SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 20 (03/2009)
Source stack : 18 (11/2008)

"There are no workflows templates available" error but actually workflow exist

I am using SharePoint 2013 on-premise farm. The workflow manager 1.0 is installed although we do not build any workflow on that.
On a site collection, when user try to create a workflow on "Pages" library, the error "There are no workflows templates available" occur. Checking ULS log there is nothing useful
Microsoft.SharePoint.SPException: There are no workflows templates available. Please contact helpdesk at Microsoft.SharePoint.WorkflowServices.ApplicationPages.AddWrkflPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
By using SharePoint Designer 2013 we can see the workflows "Publishing approval" exist. I clicked on "Publish" button on SharePoint Designer, the problem is fixed. User can see the workflow "Publishing approval" when he try
to create a workflow on "Pages" library.
However, some hours later user call and said the problem recoccur. I checked with Designer the workflow still exist and no change for "Last modified time". If I clicked on "Publish" again it will fix again.
My question is,
How can we check whether a workflow have been published? Any parameter?
How can we "unpublish" a workflow?
Any event could "unpublish" of a workflow?
Many thanks. Any input is welcome.

Hi,
According to your description, you are unable to get the workflows "Publishing approval" template in SharePoint UI.
Make sure you have activate the Publishing Approval Workflow feature. If you have activate the Publishing Approval Workflow feature, deactivate it and active it again.
Site Settings -> Site Collection Administration ->Site collection features ->activate Publishing Approval Workflow feature.
1.How can we check whether a workflow have been published? Any parameter?
We can check whether the workflow is existing in the SharePoint UI.
2.How can we "unpublish" a workflow?
Under normal circumstances, we aren’t "unpublish" a workflow.
3.Any event could "unpublish" of a workflow?
Deactivate the feature which is related to the workflow.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Is there a list of best practices for Azure websites?

Hi all;
I was talking with a Sql Server expert today and learned that Azure Sql Server can take up to a minute to respond to a query that normally takes a fraction of a second. This is one of those things where it's really valuable to learn it when architecting as
opposed to when we go live.
Websites are not Sql Server (obviously) but that led to the question - Is there a list of best practices for Azure Websites? If so, what are they?
We will be the website in multiple datacenters and using traffic manager to point people to the right one. The website will run as a REST server using Web API 2, mostly for license checks from our app running on corporate Exchange servers. And a small part
will be for javascript based web pages used for account CRUD.
thanks - dave
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

sorry I was not sure if you were using a web server or what?
One other idea out of the slow cooker is to use a dedicated web server with SQL server running beside IIS
If you are using the standard web sites, then the SQL option is about as slow as FTP uploads, very slow
I have considered time of day too, and it seems Azure is less loaded early in the AM
Corsair Carbide 300R with TX850V2 Asus M5A99FX PRO R2.0 CFX/SLI AMD Phenom II 965 C3 Black Edition @ 4.0 GHz G.SKILL RipjawsX DDR3-2133 8 GB EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler) Asus PA238QR
IPS LED HDMI DP 1080p ST2000DM001 & Windows 8.1 Professional x64 Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M Place your rig specifics into your
signature like I have, makes it 100x easier to understand! <a href="http://hardcore-games.azurewebsites.net/" target="_blank">Hardcore Games</a> Legendary is the Only Way to Play!

HT202696 What happens if Apple Support expires for a product? Does it mean there is no more help available and you are on your own just because you have an older Apple product?

We have a family of Apple products at home, and with every new one, we learn a new aspect of the Apple Life. After switching to iPhone 5S and struggling between some applications, I've decided it is time to upgrade rest of my older devices requesting an IOS Upgrade to 8.1.2 for weeks.
My older iPhone 4 didn't have an upgrade, which was not advanced enough anymore to carry a new software, this I understand. The upgraded iPod Touch and iPad Mini don't seem to have any problems with the recent changes so far. However, the older iPad (2) we had is messed up, just like many other people's as mentioned on the pages of these discussion groups. According to these user comments / complaints, it is obvious that upgrading to IOS 8.1.2 was not the right option to older version iPads just like it was not for iPhone 4; actually it shouldn't be an option in the first place.
On my previous problems with iPhone 5S, I've come to realise the practicality & functionality of the Apple Support system when contacted directly, instead of going through many discussion pages of people with same or similar problems where everybody is asking but just a few is replying. So, I wanted to give it a try to find a solution to my recent problems with iPad, but this time Apple Support pages replied with "Technical Support & Service Coverage are both Expired" message.
First, I did not know that Apple supported its users personally, and I loved it. Maybe this is because I didn't have previous problems with my old iPhone and iPad. Especially the Apple Support - Chat option I preferred, where I got help step-by-step from Apple operators. And then, I did not know that this service support was only for my devices until an expiration date, and this did not please me much.
Can anyone enlighten me on how to receive any response from Apple about what to do with problems of an old Apple device?

And as far as paying for phone support, here are a few tips:
If you call your carrier first and then they route you to Apple, you usually don't have to pay for phone support.
If you are talking to Apple and they ask you to pay a support fee, ask if you can get an exception this time. That usually works once, but they keep track of the times you've been granted such an exception.
If you still end up paying the support fee, that fee only applies if it's not a hardware related issue. In other words, if it can be fixed by just talking over the phone and following Apple's instructions, then the fee applies. But if your device is deemed to have a hardware failure that caused the issue, then the fee should not apply, and you can ask for it to be waived after the fact.
This forum is free, and almost all of the technical support articles the Apple tech advisors use are available on this website. Literally 99% of what they can do over the phone is just walking you through the publicly available support articles. In other words, you're paying the fee to have them do your research for you. It's like hiring a research consultant to go look stuff up in the public library so you don't have to. You're capable of doing it; you'd just rather pay someone to do it for you.
It's like Starbucks. You know how to make coffee. Everyone knows how to make coffee. And Starbucks coffee isn't any better than what you could make at home for far less. But you want the convenience. So you're really paying a convenience fee. Milk is more expensive at 7-Eleven than it is at the grocery store... because it's a convenience store.

We're sorry, but there are currently no solutions available in your location.

i am trying to set up a repair my iphone online, but always get we are sorry , but there are no solutions available in your location,
any body got any idea where is the problem
thanks

If I had to guess, I'd say that you live in a contry where the iPhone is not available... but since you don't tell us where you are or where the phone came from, we can only guess...

There are no more endpoints available on Azure Website

Similar Messages

Maybe you are looking for