There are no scheduled and delivery dates in /sapapo/rrp4

Hi Gurus,
When executing the transaction /sapapo/rrp4, category PO memo are being displayed. But I noticed that there are PO memos that dont have scheduled and delivery dates while the others have. Is this behavior normal? But when compared to transaction /SAPAPO/RRP3, the PO memos that dont have dates in /SAPAPO/RRP4 have dates in transaction /SAPAPO/RRP3. Could you please help me understand why there are PO memos that dont have sheduled and delivery dates when using /SAPAPO/RRP4?
Thanks,
Ann

The rrp4 view shows only receipt elements, such as Planned orders, WIPs etc.In rrp3 view (Product view), we can see both requirement and receipt elements an pegging structure.

Similar Messages

My iPhone 4 shows the carrier name, I can go online with my data plan, but there are no bars and I can't make phone calls.

My iPhone 4 shows the carrier name, I can go online with my data plan, but there are no bars and I can't make phone calls.
It worked for some time, less than a week, I made phone calls and all, and all of a sudden the problem mentioned above happened. Now I can't make any phone calls. I can go online with it, even with my Data plan, I can go to the app store (of course) but can't make any phone calls.
Please help, this is frustrating.

Did you already try the troubleshooting mentioned here? http://www.apple.com/support/iphone/assistant/calls/
Also try to reset the phone by holding the sleep and home button until the Apple lo comes up again. You will not lose any data doing this.
Message was edited by: Ingo2711

Req. delivery date and Delivery date should be same in a sales order

Hi experts,
We need a customization for getting Requested delivery date, Material Availability date and Delivery date should be same.
Example if I keep request delivery date as 12/12/2012, system should consider same dates for MAD and Delivery and confirm the requested quantity.
How to achieve this customization..
Thanks,
Bala.

system should consider same dates for MAD and Delivery and confirm the requested quantity
What you are going to achieve by this? Hope you know the concept of MAD and confirmed quantity fields. Let us assume, if stock is not there for a material for which sale order is created, can you let me know, you want the system still to confirm the quantity? You can post the goods issue only if system confirms the quantity in schedule line which is possible, only if stock is made available. If client asks something which is not possible in SAP, think in a logical way how SAP works and convince them accordingly.
G. Lakshmipathi

Calculate all days in month from schedule line delivery date for 12 mths

Hi experts,
I am trying to solve a problem and would appreciate any help! Im on BI7.
The user will input a date for the schedule line delivery date via a variable.
From this date I need to go forward 12 months exactly and display a key figure (outstanding value) by months but the first and last months must only use the days in that month i.e not the whole month if not selected by the user.
I.e if the user types in 13.05.2008
The display need to show (columns)
May 08 (13th to end of May 2008)
June 08   (All)
July 08    (All)
August 08    (All)
Sept 08    (All)
Oct 08     (All)
Nov 08     (All)
Dec 08    (All)
Jan 09     (All)
Feb 09    (All)
Mar 09    (All)
April 09   (All)
May 09 (1st to 12)
So I neen to restrict the key figure (Outstanding Value) by Schedule Line Delivery Date and display as above on a 12 month forecast basis from the day (sch line delivery daye) entered as a variable by the user.
I also need the first month to only show the dates in the month remaining including the date entered as a variable. The last month must go up to the day before exactly a year in front.
I have created the 12 months as a structure and can include the key figure and the schedule line delivery date. The schedule line delivery date for each period needs to be restricted. How can I do this to achieve the above?
Thanks in advance. Will assign good points for a speedy solution.
Best
Steve.

Hi,
    Check "OVLY" and "OVLZ" and If the sceduling is active for he shipping point /sales document type. Check "OVXD" and see If the Loading time/ Pick/pack time is determined from it. If they are getting determined from shipping point check the shipping point calender in "SCAL" .If it has saturday and sunday as holidays ,then you may have to change them. And check If the customer has goods recieving hours assigned to him (In customer master unloading point). If he has only 5 working days and If he accepts only goods at 8 am in the morining then system would propose like this.Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

Schedule Line Delivery Date Calculation with Transportation Scheduling

Hi All,
We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
Order Scenario:
'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
Our 'Route' has a Transit Time of 2 days
We create a Sales Order on Monday for a Material that is available in our Plant
The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
All help greatly appreciated.
Thanks,
Ravelle<i></i>

Hi Pathik,
Thanks for your reply. I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>.
The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
Thanks,
Ravelle

Creation of Z reports for client adding two more column that is Purcahse order and delivery dates with Internal order wise

HI Experts,
Can any one help me to add two more column for standard report that is purchase order and delivery dates for Internal order wise.
But here problem is when i checked with ABAP team they said there is no standard functional module to add two column.
Please note below :
Selection criteria is: 1) controlling area
                              2) Fiscal Year
                              3) From date and To date
                              4) Plan Version
                              5) Order Group.
My client suggested : S_ALR_87012993 this tcode to run, but we suggested with S_ALR_87013019 as in this tcode we can get all the details
That is required output fields, as it is showing all details but on yearly basis, he wants this to be period wise and also Abap team is not able to find standard functional module in the second tcode as well.
Out Put fields to Pop up
1) Orders.
2) Budget
3) Actual
4) commitment
5) Alloted
6) Available
These are two additional column
7)Purchase order
8) Delivery date.
Require your help to know which all tables are included to extract above out put fields please help me.
Thanks in Advance.
Regards,
Sudesh

Hi Preeti,
Thanks for reply, can you please let me know is there any other way to show the output fields.
As my client is very specific to run the report on period wise, i also tried to execute the standard tcode S_ALR_87013019 and were we are getting all the required outputs to pop up but this is on year wise, but we can also check by period basis by clicking on order number and actual period basis where we can see period basis.
Also one more question,what is the commitment table which is popping up in this, please advise.
Thanks in advance.
Regards,
Sudesh

I ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

i ordered iphone 6 on 15 oct and delivery date will be from 3 nov-6nov. i'll travel on 7 nov morning, am worried to receive the order late.. can you please expedite the order?

No. Because we are not Apple employees. In fact there is no one from Apple in this forum. Contact Apple directly via phone. Use the "Contact Us" link at the bottom of this page to find the phone listing.

Update Schedule line Delivery date using Bapi_po_Change

Hi all,
I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line.
I am passing the PO number, Po header, Item structure, Schedule line Structure.
But the Date is not getting updated in the Eket table.
Please suggest.

Hi Sukriti,
Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

I want to pick up Schedule line Delivery date based on Sales Order of Mater

Hi Experts,
I have one scenario like,
I want to pick up Schedule line Delivery date based on Sales Order of Material.
For example :
Go to va03
Give the order no
Press the enter
Double click on material.
Go to Schedule line Tab
Then we can find out the Delivery date .
I want to pick up the that Delivery date. Could you please help on that.
Thanks,
Amjad.

Hi,
schedule line dates are available in VBEP.
VBEP-VBELN = sales order number.
VBEP-EDATU = schedule line date.
REgards,
Raghavendra

Tried to reinstall iPhoto library from external hard drive, it shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.

My hard drive crashed recently and we took it to apple to get repaired. The apple employees said that they would have to replace the hard drive but they didn't have the equipment to get the data off my hard drive. So I took it to a computer store who had the right equipment after a month and a half of waiting they finally got all the data off my hard drive and put it on an external hard drive (Seagate Expansion Portable Drive). I then took it back to apple who replaced the hard drive. Now I'm in the process of reinstalling everything. I have never done a Time Machine back up or backed my laptop up to . Which I now will do very often once I've reinstalled everything. I have reinstalled all of my desktop images and folders as well as my iTunes library with no issues. However when i went to reinstall my iPhoto library it came up blank. I then Rebuilt the library several times and this was the result.
It shows that the photos and events are there but there are no thumbnails and if you click on an image or video nothing comes up.
Please help i have three years worth of images from holidays on here and would be devastated if i lost them.

iPhoto cannot find the thumbnails or the original pictures.
Go to your iPhoto Library in the Pictures Folder.
Right-click on it and from the resulting menu, choose 'Show Package Contents'.
This will bring you inside the iPhoto Library package. There you should see a Folder called Masters. Within that, there should be folder containing your actual photos.
Are they there?

How to combine sales and delivery data

hi
i have requirement to make a report from sales as well as deliveries. Important fields in report are sales document , material , plant , sales document type , country key , sold to party , ordered quantity , delivered quantity , price from vakon ( KBETR ), actual goods issue date.
The required extractors are 2LIS_11_VASCL, 2LIS_11_V_SSL ,2LIS_11_VAKON.
Problem is how to combine sales and delivery data as V_SSL has different key figures.Multicube is not the solution as dont have plant , sold to party and many other fields in V_SSL.
Kindly suggest how to combine sales and deivery data.
Regards,
Monika

I guess you do have shipping point in delivery.
In most scenarios shipping point may not(or) may be same like order plant.
Although they are different you can still roll up the delivery information to order level by plant since you have order # available as reference key in delivery.
With this reference key you can convert all delivery information to order (item) level.
I guess you can use one merge ODS with one cube (or) with 2 ODS for each at order level for validation.
You may have to map delivery type to order type as per R3 configuration as well.
speak with any Logistics guys for help.
cheers
Martin

Store Replenishment STO created date and delivery date

Hi
The Store replenishment STO generated out of WRP1 ;
The STO document date and delivery date is defaulted to 3 days later.
ie. WRP1 was run on 31st May. But the delivery date and the STO doc. date is 3rd June.
Is there any way to influence this? We want it to be defaulted to the next date; Replenishment is to be run for th next date.
ie. June 1st.
Regards

Hi Carlos
The master data of the article field MARC-PLIFZ- is maintianed as 0 days.
Basically the replenishment is done in the same day. (DC in the same city as the store)
However still the delivery date in the STO is by default 3 days later.
In the WRP1 screen - the planning date is today date.
Regards

My weather app in iOS 8 stopped working. Either there are no temperatures of other data, or every city is 86 degrees F.

My weather app in iOS 8 stopped working. Either there are no temperatures or other data, or every city is 86 degrees F.

Hey Jjohnk83776,
Thanks for the question. I understand that you are experiencing issues with the Weather application on your iPhone 6. Let’s see if we can troubleshoot this issue. First, try restarting the Weather app:
Force an app to close in iOS - Apple Support
http://support.apple.com/HT5137
If the issue persists, try restarting your device:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/HT1430
Thanks,
Matt M.

PO report with cost center, order and delivery date

Hi,
pls. I just need a report to display the next fields Account Assigment and Delivery Date.
I attempted with standard reports like ME2N, ME2K but it is impossible to display all the information in the same screen.
Thanks a lot for cooperation.
Regards.

HI,
Create a Infoset query or ask ababper
Tables EKKN, EKPO, EKKO
Regards,
Pardeep Mlaik

Schedule line delivery date

Hi ,
I am creating a order ( for which Delivery Not created ) for which schedule line delivery date is alloted . Which i can check in VBEP table .
But when extracting the data in 2Lis_12_VCSCL , the order is not coming . Is the extractor is correce or anyother way of checking ( check in rsa3 also )
Regards
Ankit

Hello,
the extractor 2LIS_12_VCSCL is correct to extract schedule lines information of a sales order. Check with your mappings.
Regards,
NK.A

There are no scheduled and delivery dates in /sapapo/rrp4

Similar Messages

Maybe you are looking for