There are some new JDeveloper Extension on otn home page

Just a note for those of you who access the forum directly and skipped the OTN home page. There are 2 new extensions for JDeveloper availbale, check them out in the news section:
http://otn.oracle.com

EDIT - Now that it's fixed, I shall remove my negative comments where I can. Oddly, the final reset fixed it...

Similar Messages

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

For the new iPhone 5s - is there not an option anymore to edit imessages without deleting the whole stream? There are some things I need to keep within a stream and some not necessary, and it looks as like no editing within a conversation?

Now I also know about pulling the message to the left to see the time stamp. Good to know, although I preferred it being right where I could see it without having to do a swipe or keystroke.

HT1725 i recently have downloaded a few new albums from iTunes. However, now that i have listened to the albums, there are some "blank spots" on the recording that are interrupting the songs.... what can i do to "re-download" the album without paying aga

I recently have downloaded a few new albums from iTunes. However, after I have listened to them, I realize there are some "blank spots" in the recordings... not sure why. Can I "re-download" the album/music again with paying again?
Thanks!

The advice you provided me helped download songs from the album that failed to download the first time. However, there are songs that I originally downloaded that have blank spots in the song... How can I re-download songs that have already been downloaded so they are "clean" .. i.e. the play straight through without blank spots in them. Can I do this without re-paying?
Thank You

Can anyone help me?Creating the shadow copies in the file server cluster ,there are some errors occured, OS version is WSS 2012

I construct a failover cluster(file server,AP module) for sharing files by WSS 2012,and I want to use the shadow copies to backup my data,but when making a shadow copies on the volume which is added to the cluster(not the CSV,just add
it to the cluster and use it to share files,it plays the role of file server),there are some errors occured, these errors result in the shadow copies failed,error likes the following pictures:
1: the disk F is added to the cluster,first I make the shadow copies by click the right key of mouse on the disk F,and chouse the configeration shadow copies,and click the settings, then click the schedule , and I wait just a few seconds, the error is appeared,like
this picture 1, the wait operation timed out,and then ,
I click the schedule button once again,a different error occured,like the following picture," the object already exists",if i don't set the schedule at first ,use the default shedule,and click the enable button also the same error must
accure
but the only diffrence is that, a shadow copy time point is created, also ,you can make the shadow copies by click " create now", that is creating the shadow copies manually. Although it can succesfully make the shadow copies, but when I select
a time point to revert, error occured, "A volume that contains operating system files or resides on a cluster shared disk cannot be reverted"
In a word,all the errors above make the shadow copies by schedulling failed,except making the shadow copies manually,but what makes me confused is that I have ever maked the shadow copies succesfully by schedul a policy,I don't know what makes it succesful,
it's small probability, most of time ,it's failed.No matter what kind of situation, revert must be failed.
I'm sorry for my pool english , it's the first time for me getting help in forum by english ,I don't know if I descripe my question clearly, also ,other method like the link
http://technet.microsoft.com/en-us/library/cc784118(v=ws.10).aspx I have tried,but the same errors occured.Can anyone tell me How can I make the shadow copies in File Server
cluster（AP module）？And I make a mistake in operating？ Looking forward for your reply.Thanks!

Hi,
Please check the following 2 places:
HKEY_LOCAL_MACHINE\Cluster\Tasks
C:\Windows\System32\Tasks
First please compare permission settings of the folder C:\Windows\System32\Tasks with a working computer. Correct permission settings if anything wrong. Specifically, confirm you current account do have permission on this folder.
As it said "object already exists", find the schedules you created before, backup and delete all these schedules in both registry key and folder.
Then test to create a new schedule to see if issue still exists.
Meanwhile what kind of storage device you are using? The issue could occur on specific storage device, so test to enable shadow copy on a local disk to see if that will work.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]
Thank you for you reply.On the local volume,all of these errors will not occur, but the volume in the file server cluser.There is no value in HKEY_LOCAL_MACHINE\Cluster\Tasks. On local volume, everything goes well about the shadow copy, so I do not
think something is wrong about the permission settings of the folder C:\Windows\System32\Tasks.Storage device is a SAN,we use RAID6 and provide the LUNs to the NAS engine, and the make the volume on these LUNs, Is Angthing wrong? Hope for you
reply~~

App updates via iTunes... says there are some, then no?

What's up with app updates, when in iTunes and checking for updates, it says there are some, then when I click on it, says nothing to update!
Bug?
Me?
Any info on a fix, or shall I wait...
tx folks

I am having a similar problems, mine is: it says there are updates available, i download them, then sync ........rever thing looks like it syncs find, no error messages......but the apps on my phone still arnt updated......the app store on my phone says there is updates available, but if i update on my phone i have a whole new set of problems.....here is a link to another post i made bout the other problems....
http://discussions.apple.com/thread.jspa?threadID=1634277&tstart=0
I could use some help as well......
Message was edited by: bayouRock

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

HT204266 There are some apps that I have on my Ipod that I would like to put onto my Ipad2. I searched the app store for them but the search came back with no results. Why???

If an app is available for an Ipod touch shouldn't it be available for an Ipad2?

There are some apps that are device specific....ipad only, iPhone only, etc
Go to your purchased tab in iTunes, and then look at the top and you should see 'iPad apps' 'iPod apps' etc. Look around in there and see if you can find your apps to download onto your iPad.

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .

Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
Firstly, i reset my computer few days ago and never used itunes after that .
Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
iphone doesn't respond at all .
I need some help .... i tried everything i could do ..

Hey jinyoung_20,
Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g!

Why are the application in the apple store are not compatible with the iPod touch 4g? Apple please realize there are some of us who still have the iPod touch 4g! I just want to know.

Once I find the game i will truly screenshot that it states "not compatible for these models". I just find it RIDICULOUS that my iPod touch is in good condition and some of the applications that I want download sometimes are not compatible with my iPod touch 4g. I am not going to buy an ipod 5th generation if my 4g is still going strong since the year of 2010.

HT4007 I Just updated Apeture to 3.3.2 Now there are some photos that I receive a message..."Unsupported Image Format" Are there lost? can I retrieve them? can I change the format? Help...?!?

I just updates Apeture to version 3.3.2 after installing Mountain Lion. There are some photos in Apeture that now say, "Umsupported Image Format". Are these lost? Can I retrieve them...how? Can I change the format so that I can see them again? Help?!?

Are these images "Raw" images? What is the make of your camera?
Check the version of the Digital Camera RAW Compatibility Update that is installed. The version of the raw support is shown in the About panel: from the main menu bar:
Aperture > About Aperture
Download the latest Raw Update from here:
Digital Camera RAW Compatibility Update 3.14
If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie

HT4208 Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

Just gave my old ipad to Mother N Law. How do I get her up to speed? I heard there are some classes she can take. How do I make a reservation?

They have Discover your iPad workshops at the Apple Store. Is there one near her?

My Time machine has stopped backing up saying there are some read only files.

My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

I want to change my account in the AppStore from USA to Saudi , but there are some cents 0.04 $ prevent change to Saudi and I do not need these cents So what is the solution ?

I want to change my account in the AppStore from USA to Saudi , but there are some cents 0.04 $ prevent change to Saudi and I do not need these cents So what is the solution ?

Click here and request assistance.
(88185)

There are some new JDeveloper Extension on otn home page

Similar Messages

Maybe you are looking for