There are songs synced without my permission on my iOS device.

There are songs on my iOS device that are synced without my permission, not to mention using memory I would rather use for something else. I have untoggled everything and they still will not go away. I think they are on my iCloud but I don't know how to delete them from there. Please help!!

They're in the "Audio" category on the capacity bar on the bottom of the itunes window, when you click on the device in itunes (it says 2370 Songs).  However when you select music from the dropdown menu of the device on the left hand side of the itunes window, it says there's on 2305 tracks.

Similar Messages

  • HT1386 There are songs in my library that do not show up on the device after syncing

    There are songs in my library that do not show up on my ipod after syncing.
    Why would this happen ?

    Do they play in iTunes on the computer?
    Are they from a different source or format that the ones that do sync?

  • There are songs on my icloud that I deleted from my itunes, but still show up on icloud. I want to delete them from icloud, but can't since they don't appear in my itunes!

    I have a large library on icloud- 26203 songs is the count when I'm playing over my apple TV, but my itunes only shows 25989 songs. There are songs on icloud that no longer are in my itunes library, or show up in itunes as being on icloud. I want to delete these songs but can't figure out how. I have reset my itunes match on both my computer and my apple tv to no avail.

    No. It's on and I update it daily.
    When I talk about removing songs from my shuffle play, I'm referring to listening over apple TV. My cloud limit is nearly maxed out, so I am constantly removing/adding songs. That's why I was surprised when I went to delete a song I no longer wanted in the mix and was surprised to find it already deleted from my itunes, but still present in the cloud. I've signed in and out of itunes/and match on apple tv as well, but that didn't remove the tunes in question!

  • I recently purchased a new Macbook Air and used migration to transfer old files from my old PC to the Mac, and now there are songs that I purchased through Itunes on my phone that are not on my Mac, how do I transfer these songs from the phone to the Mac?

    I recently purchased a new Macbook Air and used migration to transfer old files from my old PC to the Mac, and now there are songs that I purchased through Itunes on my phone that are not on my Mac, how do I transfer these songs from the phone to the Mac?

    dnunn wrote:
    ... how do I transfer these songs from the phone to the Mac?
    Transfer Purchases  >  http://support.apple.com/kb/HT1848
    Download Past Purchases  >  http://support.apple.com/kb/HT2519

  • I can't back up my iPhone4.  When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

    I can't back up my iPhone4.  When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!

    Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?

  • HT202729 Why is it now there are Song in ITune Store that I can ONLY Play and Not Buy?

    Why is it now there are songs that I can ONLY Play not Buy?

    What do you mean 'only play and not buy' ? If you mean that a song has 'play' against it in the store then that implies that you've already bought it and it's in your iTunes library

  • Is there a way to find out if there are songs in my library that do not belong to a playlist?

    Is there a way to find out if there are songs in my library that do not belong to a playlist?

    http://dougscripts.com/itunes/scripts/ss.php?sp=notinanyplaylist  and related links in this one

  • When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    When I import an Album or Folder from my computer that is a Various Artist Album it creates as many albums by the same name as there are songs?  How do I fix this so it is only one Album?

    Before you begin the import, edit the properties of the tracks to set the Album Artist to Various Artists and Part of a Compilation to Yes.
    For more info. see Grouping tracks into albums.
    tt2

  • When syncing Aperture projects/albums to an iOS device, are the original files synced or are they the previews?

    My concern is that sincing the original RAW files will eat up the space on my iPhone quickly.
    So what size/quality are the photos from Aperture synced to my iPhone (or iOS device)
    Thanks in advance.

    Are you asking about syncing using iTunes?
    iTunes will sync jpeg previews images to your iOS devices, that are reduced in size. It creates a cache inside your photo libraries - the iPod Photo Cache.
    See: iTunes: Understanding the iPod Photo Cache folder
    or: Syncing photos using iTunes
    If you want to have the original raw photos on your iDevices, upload them using the Photo Stream; that supports a variety of other formats ( JPEG, TIFF, PNG, and most RAW photo formats).
    http://support.apple.com/kb/HT4486

  • ITunes crashed during transfer purchases now says This computer has previously been synced with an iPhone or another iOS device

    The problem that have started when I was going to sync my iPhone 4 with current iTunes running on 64bit Windows 7.
    I started iTunes and plugged in my iPhone.
    All looked good and the iPhone came up as the device as it should have.
    Next I wanted to transfer purchases prior to syncing so I started the Transfer Purchases process.
    iTunes stopped working during the Transfer Purchases process
    Now when I plug in my iPhone iTunes takes me to the “setup your iPhone” screen and displays “This computer has previously been synced with an iPhone or another iOS device” and only allows me to restore and old backup or setup as new.
    Obviously some files were not closed properly when iTunes crashed during the transfer purchases process, how can I cleanup iTunes so that it will allow me to backup and sync my phone.
    I am a software developer and am sure that a fix is not in the menu options   What I am saying is that I can easily remove or edit corrupt files to get it working.
    Thanks, Mike

    The error message you're seeing is likely the other way around -- i.e. something like "This iPhone has previously been synced with a different computer".   There's no problem syncing multiple iOS devices to the same computer.
    However, the reverse is not true for the iPhone --  you cannot connect an iPhone to another computer without it being erased, even if you manually manage music and video.  So, it sounds like you've been syncing your iPhone to a different computer?
    Also, 5.1 (not 5.0.1) is the latest iOS.

  • How can one sync a) Albums to all my iOS devices and b) Photos

    1/It is evident to me that only My Photostream is automatically uploading/ syncing ( within the number of 1000) pics;
    but Each iOs- device may have a different Photostream ( eg: if activated at different times, previously)
    2/ since Photostream will then delete ( algorithms unknown) an unknown number of photos, to stay<1000,
    saving is necessary:
    one would either save them in Photos/ . (?)
    Someone here has suggested to take the content of Photostream and create a new Album ( eg: "From Photostream_ Date"),
    and transfer ALL images thereto, from time to time (?)
    - it would be helpful if syncing is also  possible on the Album level ( via iTunes ??)
    - OR: are the Albums strictly collections on the respective iOs - device, (and the Mac ?), eventually
    containing different Photos (!), ie : Albums are on the device - level (?)
    ->> Having said so, Can one sync on the Album level ?
    - OR somehow also on the Photo- level ?
    3/ when is the best time, to save the My Photostream
    Sorry , if too many Q's

    My Qs were more specific
    It is easier to answer specific question, when I know whch options you are having on your computers. I.e. I wondered if you would be able to use Shared PhotoStreams  instead of My Photo Stream, but that would require MacOS X 10.9. at least, see: iCloud: Using and troubleshooting Shared Photo Streams
    ( pls see above): 1/ I was assuming that via iCloud only " my Photostream" is distributed onto all aktivated iOs- devices;
    The Photostream "My Photo Stream" uses a buffer in iCloud: Each device will upload the most recent (last month)  photos saved to the Camera Roll, if Photo Stream is enabled and any photo you share to the stream. The buffer in iCloud will only keep the photos for a month - it is meant as a streaming buffer and not as a storage. And the stream you are seeing on your devices is fed from this buffer. Depending on when you activate Photo Stream on the devices they will show different selections of photos - it depends on what is currently in iCloud. With IOS 7.0.4 you could also stream to Shared Streams, and they will keep all photos in iCloud, only you would need to upgrade.
    - having said so: does iCloud then back up my Camera Roll ( Photos)  in toto ?
    Your Photostream is generated automatically from all photos saved to your camera roll, so if you keep all photos in your camera roll and save any new photos from the Photo Stream to your camera roll, they will all be backed up, inclding any videos in your camera roll. This list describes in detail, what automatically will be backed up in iCloud over Wi-Fi:
    See: iCloud: Backup and restore overview
    2/ the 2nd Q posed was: Is there a mechanism to save/ backup on the Album level ( I guessed it can be done via iTunes), but also through iCloud (??)
    That is exactly, why I asked for your system versions: if you could create Shared Streams, you could use 100 separate streams just like albums, and all would be stored in iCloud.
    But there is no way to structure "My Photo Stream".
    But the iCloud backup of your devices will include all application data, so albums you define in the Photos app will also be included, only not the photos synced to your device using iTunes, unless you save them to the camera roll.
    - Does one then HAVE TO make b/u via iTunes for EACH iOs device ( and of course the whole Library file
    You can make your iCloud backup using Wi-Fi ( iCloud: Backup and restore overview), but you will have more control over it, when you create the backup using iTunes. And syncing using USB is faster than Wi-Fi.
    4/ Does one have to save (B/U) as well via iTunes into the iPhoto library,
    as also via iCloud (?)
    It is recommended: the iCloud backup of your IOS devices will enable you to restore your devices directly from iCloud, but a separate backup in iTunes will make it possible to restore a new replacement device from the backup, if your iPad, iPhone will be stolen, lost, or defective. And you can access the iTunes backup even when the network is down, or there is a problem with your iCloud account.
    iPhoto library: When you automatically import the photoStream into your iPhoto library on your Mac, any backup of your iPhoto library will be a backup of your Photo Stream photos as well. I'd create the albums in iPhoto on your Mac.
    Some Links: 
    iCloud: My Photo Stream troubleshooting
    iCloud: Photo Stream FAQ
    Regards
    Léonie
    A remark about Photostream : its deletion logic for pics, once 1000 is reached is intransparent
    This is explaine d by the fact that "my Photo Stream" is not meant to be a storage, just a transient buffer. You have one month time to grab your photos from the stream, and then they will be removed, consider it to be a stream of photos that you are viewing from a narrow window. You are supposed to download the photos to your camera roll or to an event on your mac, as soon as you are seein it in the stream. After a month it will be gone.

  • HT4095 2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have bee

    2 Some movies may not be available from iTunes in the Cloud. These movies, if purchased in HD, will download both the HD and SD versions for you to sync to your compatible iPod and iOS devices. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.

    Do you have a question ? Not all content is available for re-downloading e.g. if the content provider (or Apple) removes them from the store, and there are also some film studios (in countries where film re-downlaoding is possible) who haven't agreed to allow their films to be re-downloaded.
    Otherwise, re-downloading : http://support.apple.com/kb/HT2519

  • Why there are some metric without "Last Upload" in "All Metric" page?

    I am developing a MYSQL Plugin. after I deployed it to agent, and add target to it. I found there is something strange for some metric collecting/uploading. And I test it on both OMS 10.2.0.4 and OMS 10.2.0.5, they have the same issue.
    In page “All Metric”, not all of metrics have a value under column “Last Upload”. And if I click the metrics without “Last Uploaded”, some of them actually have data collected/uploaded and display it in UI. Then I am very confused why those metric had no "Last Upload" in All Metric page? Does it mean those three metric only collected/uploaded once? Does it mean there are something wrong with my XML? or what?
    Here is the definition for one of metrics without “Last Upload”,
    ===========================================================
    <Metric NAME="ProcessList_Count" TYPE="TABLE" HELP="NO_HELP">
    <Display>
    <Label NLSID="mmd_ip">ProcessList_Count</Label>
    <Description NLSID="mmd_ip_desc">The ProcessList_Count</Description>
    </Display>
    <TableDescriptor>
    <ColumnDescriptor NAME="GroupBy" TYPE="STRING" IS_KEY="TRUE">
    <Display>
    <Label NLSID="mmd_ip_GroupBy">GroupBy</Label>
    <Description NLSID="mmd_GroupBy_desc"> The GroupBy. </Description>
    </Display>
    </ColumnDescriptor>
    <ColumnDescriptor NAME="Ip_User_Aggr_Count" TYPE="NUMBER" IS_KEY="FALSE">
    <Display>
    <Label NLSID="mmd_ip_Ip_User_Aggr_Count_Value">Ip_User_Aggr_Count</Label>
    <Description NLSID="mmd_ip_Ip_User_Aggr_Count_desc"> The Ip_User_Aggr_Count. </Description>
    </Display>
    </ColumnDescriptor>
    <ColumnDescriptor NAME="Command_Aggr_Count" TYPE="NUMBER" IS_KEY="FALSE">
    <Display>
    <Label NLSID="mmd_ip_Command_Aggr_Count_Value">Command_Aggr_Count</Label>
    <Description NLSID="mmd_ip_Command_Aggr_Count_desc"> The Command_Aggr_Count. </Description>
    </Display>
    </ColumnDescriptor>
    </TableDescriptor>
    <ExecutionDescriptor>
    <GetTable NAME="MysqlProcessAggregate" USE_CACHE="TRUE"/>
    <GroupBy NAME="IpUserAggrCount_I" FROM_TABLE="MysqlProcessAggregate">
    <By NAME="GroupBy" COLUMN_NAME="UserIp" />
    <AggregateColumn NAME="Ip_User_Aggr_Count" COLUMN_NAME="Id" OPERATOR="COUNT"/>
    </GroupBy>
    <GetView NAME="IpUserAggrCount_II" FROM_TABLE="IpUserAggrCount_I">
    <Column NAME="GroupBy" COLUMN_NAME="GroupBy" />
    <Column NAME="Ip_User_Aggr_Count" COLUMN_NAME="Ip_User_Aggr_Count" />
    <ComputeColumn NAME="Command_Aggr_Count" IS_VALUE="TRUE" EXPR=" " />
    </GetView>
    <GroupBy NAME="CommandAggrCount_I" FROM_TABLE="MysqlProcessAggregate">
    <By NAME="GroupBy" COLUMN_NAME="Command" />
    <AggregateColumn NAME="Command_Aggr_Count" COLUMN_NAME="Id" OPERATOR="COUNT"/>
    </GroupBy>
    <GetView NAME="CommandAggrCount_II" FROM_TABLE="CommandAggrCount_I">
    <Column NAME="GroupBy" COLUMN_NAME="GroupBy" />
    <ComputeColumn NAME="Ip_User_Aggr_Count" IS_VALUE="TRUE" EXPR=" " />
    <Column NAME="Command_Aggr_Count" COLUMN_NAME="Command_Aggr_Count" />
    </GetView>
    <Union NAME="Result">
    <Table NAME="IpUserAggrCount_II" />
    <Table NAME="CommandAggrCount_II" />
    </Union>
    </ExecutionDescriptor>
    </Metric>
    ===========================================================
    ===========================================================
    <CollectionItem NAME="MysqlProcessAggregate">
    <Schedule>
    <IntervalSchedule INTERVAL="10" TIME_UNIT="Min" />
    </Schedule>
    <MetricColl NAME="MysqlProcessAggregate" />
    <MetricColl NAME="ProcessList_Count" />
    </CollectionItem>
    ===========================================================
    Any help will be appreciated!!!
    Thanks,
    Satine

    Hello Satine,
    If the 'Last Upload' timestamp value shows "-", it means data for particular metric(s) never got uploaded from EM Agent. This can happen if:
    - Metric collection is disabled
    - Metric is defined as 'Real-Time metric'
    - Metric is defined for scheduled collection, however, due to some parsing error, EM Agent
    You mentioned -
    "...And if I click the metrics without “Last Uploaded”, some of them actually have data collected/uploaded and
    display it in UI. Then I am very confused why those metric had no "Last Upload" in All Metric page? Does it
    mean those three metric only collected/uploaded once? Does it mean there are something wrong with my
    XML? or what?..."
    By clicking on the metric link (on 'All Metrics' page), you are performing a real-time collection - i.e., Agent is informed to collect the data and provide it to the caller APIs so that the data can be displayed on UI. Such a data displayed is not from EM Repository. Hope this addresses your confusion with - "...why those metric had no "Last Upload" in All Metric page...". If you want to see the history data, you need to expand the particular metric and click on the sub-links (which are the non-kyy metric-columns that you would have defined in the target-type metadata xml file)
    Since you mentioned that when you are doing a real-time collection (by clicking on the metric link on 'All Metrics' page), you are retrieving data, I don't think there should be anything wrong in the metadata xml file. Yes, it can happen that EM Agent didn't find an entry in default-collection OR there was parsing issue for the entry in default-collection, which may cause the metric to be assumed as 'real-time' by EM Agent. However, looking at the example that you specified, don't think that should be the case.
    Can you check
    1. the 'Collection Schedule' and 'Upload Interval' mentioned for these metrics on 'All Metrics' page ? Is this
    same as what you specified in the default-collection xml file ?
    2. Are there any errors reported in emagent.trc / emagent.log for metric "ProcessList_Count" ?
    Regards,
    -Shant

  • There are songs that I have purchased that are not showing up in my iTunes or in my cloud.

    I purchased these songs a couple years back maybe in like 2010 maybe even before that. When I brought a new iPhone and Mac I assumed all of my music would be in my iCloud but there are multiple sons that I have purchased that are not there. When I look on the ITunes Store it will say that they have been purchased but doesn't give me then download option. What should I do?

    also these do not even show up in the "purchased" folder in my library. How do i resolve this problem?

  • I Have iBook OS X 10.3.9 and iTunes 4 but not recognizes mi ipod shuffle 4th gen. there are some fix without update to OS X 10.5?

    I want a solution for this
    Necesito una solucion para esto sin tener que cambiar todo el sistema OK

    Your computer needs to meet the Shuffle's minimum requirements in order to work at all.  There are NO workarounds.
    http://www.apple.com/ipodshuffle/specs.html
    B-rock

Maybe you are looking for