There are to big "rings" appearing in the middle of my iMac 27" screen.

There are to big "rings" appearing in the middle of my iMac 27" screen.They are one visible when the screen is dark. Its very annoying. Does anybody know how i can get rid of these ring-shaped marks in the middle of my screen?

If the marks are on the glass rather than the actual screen, it's an easy job (if you are careful) to remove and clean the glass. Not sure of the implications on your warranty, if you're still covered.
Here's a short video. I've done it a few times on various Macs without problems. I'd turn the Mac off before doing it.
http://www.youtube.com/watch?v=yeAZqw-494Q

Similar Messages

There is a big looking streak in the middle of the screen why?

ok so i just got my imac 21.5 i3 like a week ago and today i decided to clean the screen when i notice this big looking streak right in the middle of the monitor and say i wipe it with a free lint cleaning cloth the iklear provided and it goes away but then seconds it just comes back why can some please? is this normal ?what gives and what should i do thanks ?
here are some picshttp://i900.photobucket.com/albums/ac208/mrkkrazy187/MobilePhotoAug10201090227PM .jpg
http://i900.photobucket.com/albums/ac208/mrkkrazy187/MobilePhotoAug10201090246PM .jpg

Depends where you got it, if you purchased it at an Apple store call up and make an appointment to save dragging it around, if online contact support, if another outlet take it straight back.

Is firefox going to contimue pretending that all the problems are answerable is a few gems of technical jargon? There are no big problems--such as the download of firefox 4 creates problems??

the details are in my last email to you, about 5 minutes ago.

See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

My phone has been turning its self off lately, and when it turned its self back on there was a big black line down the middle.What do I do?

PLEASE HELP!!!!!

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the above does not resolve, take the device to Apple for evaluation.

Big white spot in the middle of iphone scree

I had a problem with my iphone last night, i left it charging overnight and this morning it was still on but the screen was completely black and it wouldnt respond to anything that i did. I tried doing the typical restoring and connecting it to itunes to restore it through there and it wouldnt respond. After a few hours while i was looking for a solution it just turned completely off because it ran out of battery. Now everything is working but there is a big white blotch in the middle of the screen, but it seems to be a surface thing, because when i take screenshots it doesnt show up on there. Is there anyway that i could get rid of this blotch? This is what it looks like, its see-through but its very bothersome. Any help is greatly appreciated!

mayor screen defact alart it will likely never work again

My iPod Touch (5th generation) is not responding to my touch. There are also several colored lines in the background of my screen. Virus?

Since my iPod isn't responding to my touch, I can't switch it off or restart it as I normally would. I've tried doing the hold-down-the-sleep-button-and-the-home-button-for-ten-seconds thing but when the Apple logo appears, it's either completely pink in color or there are these vertical colored lines in the background. When the lock screen reappears, sometimes it looks completely normal (but it still doesn't respond), or everything's blurred, or there are these weird colours in the background, or those lines I mentioned before, but most of the times, it's completely dark and I can onlu see this moving flash at the bottom of the screen (indicating the presence of the slide to unlock thing).
My computer was recently reformatted because it had had a virus, so I'm worried my iPod has gotten the virus too. I have some data on there that I really can't lose. (I haven't backed up this data because my computer had been on the fritz for the past two weeks).
Is taking it to an Apple Help Centre the only cure? (I purchased the item in March 2013; Is there any chance I can get it replaced for free?) I tried moving the photos from the device to my PC but it says there are no photos in my device. (I've moved my photos before when I'd forgotten my password and was about to reset it.)
I would really like some advice ASAP because if it is a virus, the longer I keep it untouched, the more havoc it causes. i fear.

I do not think talking to Apple will do more than the following:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why won't some of my songs, that used to sync, sync to my iPhone 5 now? There is an empty circle appearing to the left of the check marks for each of the songs that were not successfully synced.

Why won't some of my songs, that used to sync, sync to my iPhone5 now? There is an empty circle appearing to the left of the check mark in iTunes for the songs that are not properly syncing.

I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand?

My Thunderbird page is screwed up - there is no address book appearing in the tool bar and i do not see a "write: tab - just message - how can I restore

My Thunderbird page is screwed up - there is no address book appearing in the tool bar and i do not see a "write" tab - just "message" how can I restore back to normal?
Would so much appreciate help... frustrating.

Sounds like you are missing the Mail Toolbar.
Do you have a Menu Bar with File-Edit-View etc?
If not press the alt key to make it appear.
From the Menu Bar select View-Toolbars and turn the missing toolbars back on.
Write and Address Book are on the Mail Toolbar.
FYI: The alt key or F10 will make a missing toolbar appear in most applications.

There are two updates for App but the download doesn't star... What is going on???

There are two updates for App but the download doesn't star... What is going on???

Start by doing a reset ,you will not lose any data
hold home /sleep button until Apple logo appears ignore off slider
first try closing Kindle App on iPad

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

There are no message servers maintained in the associated SLD Error/Problem

Hi Experts,
I developed a Web Dynpro in my Composition Environment 7.1 RS5 and I am facing some problems. I maintained SLD Data Supplier and SLD Used By Applications and they are OK. I did three different destinations SLD_Client and SLD_DataSupplier as HTTP (CE) and one more as RFC Destination type (Destination ABAP). All of them ping u201CSuccessfully connected to HTTP destination SLD_Client with response code 200. Content type text/htmlu201D. In my SLD Data Supplier Configuration the collect and send data are completed duccessfully. In Jco RFC Provider I did one RFC Destination which I called CE1_PORTAL_EPD and is pointed to R3 and is running OK. Finally when I want to maintain my Jco Web Dynpro (WD_RFC_FLIGHTDATA_META) the next message appears:
There are no message servers maintained in the associated SLD. Please contact your system administrator.
I changed my services file which is in C:\windows\system 32\drivers\etc\ services and add my port as:
sapmsXYZ 3600/tcp # SAP system message port System ID XYZ production, but the message is still appearing . What else is missing???
+ It is against Rules of Engagement to ask for points and solicit responses using points. +
Thank you very much
David Cortes
Edited by: Bhavesh Kantilal on Dec 3, 2008 11:42 AM

Thank you very much Suresh Pagadala, your answer has been very helpful.... I solved the problem, I had not patched the SLD Component.... in order to patch the CE must download the SLD component from....
https://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=LIST&HEADER=&FUNCTIONBAR=&EVENT=LIST&ONR=01200314690200006722&NTYPE=T_CV_DELO&V=MAINT&TA=ACTUAL&U=S0004970077&AI=SWTYPSC|&AI=PECCLSC|OS&AI=PECU_OS|OSINDEP&AI=DELO|10005117&AI=PVNR|01200615320900001553
Regards

Trying to delete a published folio, but account says "There are no folios to display" in the Producer Organizer

Hi there,
I published a test folio a few months back and now trying to delete it ahead of publishing production folios, but get "There are no folios to display."
The folio only appears for Android users, iOS can't see the folio.
Folio ID: 4abb74da-4cc9-4112-be05-b86b2f71be35
Folio account: [email protected] (with admin at [email protected]) - neither of them containing any folios.
Account ID: 4d344605-7c04-5257-96ca-2be1df1144e1
Thanks in advance

Contact DPS Enterprise Support (formally known as Gold Support), along with credentials of the Application account.
To get the contact information, login to http://digitalpublishing.acrobat.com and locate the support contact info on the bottom of the screen.

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

When adding a printer share within Print Management receive "There are no more endpoints available from the endpoint mapper."

I've installed Server 2012 as a print server (Print server will be the only function of this server). I'm now trying to add printers. The first one I've added is a HP 2035 with the Windows update HP Universal PCL6 driver. If I chose to share the printer
during the setup I receive "There are no more endpoints available from the endpoint mapper." If I choose not to share during the setup, it adds without any issues...until I launch Properties and attempt to share it. I'm finding it doesn't seem to
matter what driver I use, whenever I share I end up with the same result. I've also tried using the PCL6 Universal Driver from HP, no change. I'e been researching this issue for hours without any change. By default, we disable firewalls on servers (Some TN
thread suggested checking to ensure the firewall is disabled). Spooler isn't crashing. I've tried adding a few others printers, running into the exact same issue. Why is trying to share the printers causing this issue?

I've seen some people state they get this error when disabling the Windows Firewall service. I've never seen the error with the service disabled but it may be the replacement software interfering.
If it's off start up the service and let us know the outcome.
Alan Morris formerly with Windows Printing Team

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

There are to big "rings" appearing in the middle of my iMac 27" screen.

Similar Messages

Maybe you are looking for