There has been a signature failure in Think Centre M73

I made a clone of Lenovo Think Centre M73 after I clone in Lenovo CPUs of the same type out the command "There has been a signature failure."
if anyone could provide a solution

Hello and welcome,
I don't have a solution for you but a quick Google of "clone There has been a signature failure" pulls up quite a few hits. One common theme is that the wrong partition is set active. Here are a two of the hits:
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/HELP-After-clone-the-HDD-with-ghost-show...
http://www.terabyteunlimited.com/kb/article.php?id=553
What software did you use to clone the drive? Was it a full drive clone? All partitions?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Thinkpad X220 There has been a signature failure Crash

Hello,
My thinkpad threw the blue screen of death repeatedly and each time I booted it was very slow. I logged in to safe mode to delete some temporary files. When i rebooted it went to the lenovo recovery mode where it looked like it was not doing anything much. I waited for about 45 minutes and did not see any progress on the progress bar. So, rebooted it and then came the "there has been a signation failure error".
So I tried to boot it with the windows cd to see if I could repair it and it went up to the point of copying files after which it just hung going in a signature failure loop.
Now all i see when i start the system is there has been a signature Failure message.
Has anyone faced this situation before?
How do i restore windows 7? all i can access is the bios mode.
Any help is much appreciated. Thanks.

Hello and welcome,
I don't have a solution for you but a quick Google of "clone There has been a signature failure" pulls up quite a few hits. One common theme is that the wrong partition is set active. Here are a two of the hits:
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/HELP-After-clone-the-HDD-with-ghost-show...
http://www.terabyteunlimited.com/kb/article.php?id=553
What software did you use to clone the drive? Was it a full drive clone? All partitions?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Getting message - there has been a signature failure

Hello
Getting message - there has been a signature failure. Any idea how to fix this.
Regards
Anil

Laptop is Lenovo - T500

Imaging Lenovo T420s: "There has been a signature failure"

Has anyone successfully cloned an OEM Lenovo laptop drive using ZCM 10.3.4? I can create the image just fine, but after restoring said image to another machine, it will not boot and simply yields the error "There has been a signature failure." I understand that this has something to do with Lenovo's non-standard MBR layout and that you can issue the -IB switch when using Ghost to successfully image these things, but what about ZCM? My repeated attempts to research a fix have proven unsuccessful, but surely someone out there has gotten this working...Right? I'll wipe the drive and install from scratch if I have to, but I'd much prefer to get a modified OEM image working.
Thanks in advance.

Originally Posted by spond
Placlair,
if you don't get anything here, I strongly suggest a Service Request...
Shaun Pond
Thanks for the suggestion, but we don't have a support maintenance agreement, so I'll likely end up wiping and installing from scratch if I can't get OEM imaging working.

Lenovo G530 There Has Been A Signature Failure

Hi all. I have a Lenovo G530. I followed the manual on how to do an original system restore through BIOS. Now I keep getting 'There Has Been A Signature Failure'. I've read online about the partitions, but i don't know how to access them to get me to the next step.
Any help is appreciated.

Originally Posted by spond
Placlair,
if you don't get anything here, I strongly suggest a Service Request...
Shaun Pond
Thanks for the suggestion, but we don't have a support maintenance agreement, so I'll likely end up wiping and installing from scratch if I can't get OEM imaging working.

" There has been a signature failure"

Hi everyone,
I am getting this error message in T61, which has XP pro. I tried what ever I found on internet to resolve it, but no solution. I booted with window 98 to get command prompt, and used fdisk/mbr, again no success.
I took out harddisk and connected to other laptop and I can see there are two partition on harddisk, and one of them is recovery partition.
Is there any way I can make bootable XP cd with the data present in recovery partition by attaching this hard disk as external drive to other laptop?
Or is there any way to update the missing files which are giving this error?
Thanks

There's a lot of info out there. Try starting here: http://goo.gl/aK3Su
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up.

The SIM card In my iPhone 5 has been giving me occasional messages that there has been a SIM Failure, there is NO SIM, or that there is an INVALID SIM. Until today, I was able to restart it with no problem and the SIM card would start up. This afternoon the NO SIM message came up and I cannot fix it. What is my next step? I am traveling in Canada now and it is not convenient to come back to the States just to get a SIM card.
Thanks,
Lou

Hi,
Thanks for getting back to me. How can I initiate Verizon sending me a new SIM card? I will be here long enough to receive it if they can send it to me.
I have been trying to call Verizon Wireless, but they won’t take my call from my Skype account and I don’t have my phone.
Thanks again,
Lou

My macbook pro won't turn on. I think there has been a power surge because of a faulty phone charger. Any advice?

I think there has been a power surge through my mac book because of a faulty phone charger. Any advice to turn it back on?

Intel-based Macs: Resetting the System Management Controller (SMC)
More likely you will need to reinstall OS X:
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

Hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this

hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution, new Apps. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this condition, no one seem to care,
i have a story about my sister, am talking on her behalf, she got stolen her phone at a caffee when she just come from a horeble exam, she was very mad and having haedace for not doing well at the exam, i ask her if we could have coffee before we go home, once she sate; while i was getting the coffee for her, some one snicked to her pocket and took the phone, immidatly she feelt it and went on to searching, but nathing was hopefull. what makes it more heart braking is that she worked day and night just to buy the phone and pay for her books and so on as a student. she use to work 16 houres a day before she had to start school. 8 houres in one place and then to the other place. and she was always demanding for more houres to work; one day her boss saw her on her other job and she was serprised to see her and saied OHhh my God Milly if you work like this, i wonder if you servive, how could you also ask for more houres, My sis had to do it she has no parents or any thing, well the phone was taken after only two months of having it. the sad thing is she stile dream having it even though she can't think of buying againe. well me i have tryed a lot of things but i know some were out there there is a solution for people like this, it is not always fare for some one who has payed up to 800 to just loose his ......
Thnks

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

When user click "My Site clicking My Content states: There has been an error creating the personal site. etc

Hello community
    Using Sharepoint 2010 Server and the UI on its intranet there is a My Site. After creating the My Site the user account that created the intranet easily can create it's My Site, My Content and My profile. But when I logon as
a user
when I try to create the My site I get an error stating" "There has been an error creating the personal site. Contact your site administrator for more information". In the Event viewer log pasted below it says: A failure was encountered
and User cannot be found. So I check the UPS Synchronization and I can find the username in UPS "Manage User Profile" and I can logon with the username I just can't create the My Content after clicking My Site. The funny
thing is if I click My Profile the My Profile page appears (although it is a one-way trust relationship if I use "Check Names" when I try to "Add User" to a group an error message appears stating "No match found. etc). So the
question is how come the account that created the intranet can create
My Site and create My Profile and My Content but if a regular user account logs on and clicks My Site, My Profile and get a page but clicking My Content produces that error that says: "There has been an error creating the personal site. Contact
your site administrator for more information". (Note: The output from Event Viewer is posted below)?
    Thank you
    Shabeaut
Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Portal Server
Date:          7/24/2014 4:51:42 PM
Event ID:      5187
Task Category: Administration
Level:         Error
Keywords:
User:          NT AUTHORITY\IUSR
Computer:      <ServerName>.<FullQualifiedDomainName>
Description:
My Site creation failure for user '<DomainName>\<UserName>' for site url 'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure
was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-SharePoint Products-SharePoint Portal Server" Guid="{8b3ddd3d-2b09-4669-bf81-e2d6921feeea}" />
    <EventID>5187</EventID>
    <Version>14</Version>
    <Level>2</Level>
    <Task>1</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-24T20:51:42.494Z" />
    <EventRecordID>33776</EventRecordID>
    <Correlation ActivityID="{BC4FAAA6-FA5B-4309-8C2E-0639F5BAC567}" />
    <Execution ProcessID="9600" ThreadID="9520" />
    <Channel>Application</Channel>
    <Computer><ServerName>.<FullQualifiedDomainName></Computer>
    <Security UserID="S-1-5-17" />
</System>
<EventData>
    <Data Name="string0"><DomainName>\<UserName></Data>
    <Data Name="string1">'http://<MySiteHostUrl>/personal/<DomainName>\<UserName>'</Data>
    <Data Name="string2">Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
   at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName,
String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
   at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail,
String quotaTemplate, SPSiteSubscription siteSubscription)
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   --- End of inner exception stack trace ---
   at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
   at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
   at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
   at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
   at Microsoft.Office.Server.UserProfiles.UserProfile.CreateSite(String strRequestUrl, Boolean bCollision, Int32 lcid)</Data>
</EventData>
</Event>

Make sure you enable self service site creation on the MySite web application via CA
http://technet.microsoft.com/en-us/library/cc261685(v=office.14).aspx
You mentioned trusts and people picker. I am having a bit of trouble understanding the exact issue here, but is the issue also coming up that the user in question cannot be found with people picker?
searchadforest setting to make sure SP can reach to trusted domains to find users.
"When a Web application uses Windows authentication, People Picker searches all two-way trusted forests and all two-way trusted domains. However, if you want to search from a one-way trusted forest or a one-way trusted domain, you must run the
setapppassword operation, and then run the peoplepicker-searchadforests
property."
http://technet.microsoft.com/en-us/library/cc262051(v=office.12).aspx
http://technet.microsoft.com/en-us/library/cc263460(v=office.12).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

I thing I have some phishing going on, there has been some emails going around that I haven't sent plus getting emails from friends who haven't sent them, what to do?

I think I have some phishing going on, there has been some emails I have received from people I know that haven't been sent also people have said I've sent out some when I haven't , how do I investigate this?

What you describe is generally not an issue with your computer. Everyone gets phishing e-mails unless you or your ISP has blocked them.
As for e-mails from friends that they didn't send, these are usually because someone insists on putting 200 address in their e-mails with a link to a cat video. If people used distribution lists or the bcc field for mass mailings, the chance of this is reduced. Probably one of your frineds has a Windows virus that is stealing e-mail addresses, or their hotmail. msn, or outlook account has been hacked.
You probably don't need to do anything from your end

Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?

Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

There has been a network or file permission error. The network connection..

hello,
there has been a network or file permission error. The network connection may be lost.
this is the error my client gets sometimes when he wants to save a word document.
when i go in the finder i have no problem accessing that network share, and when i look up the file and check the permissions there is no reason why this error should occure.
situation :
1 os 10.3.9 server
7 os 10.5.5 clients
1 os 10.3.9 client
office 2004 for mac (version 11.50)
there are 2 10.5.5 clients (emacs) with this problem on a regular base (3-5 times a week). One imac 17" 10.5.5 has this once a month.
it is a wired cat5 network.
any idea what could cause this problem?
thanks
Marco

I found a logical explanation on the following site : http://www.makemacwork.com/office-2004-wont-save-to-server.htm , I am gonna try the steps they describe and post back the result.
Marco

There has been a signature failure in Think Centre M73

Similar Messages

Maybe you are looking for