There is a blank page preview in Windows 7 taskbar.

I use Firefox 4 with "Show tabs previews in the Windows taskbar" option checked.
Every using Firefox for some time, a blank page starts appearing in the preview list. It cannot be closed. Hovering mouse pointer on it only shows a blank page and a "busy" sign.
I don't know exactly how to reproduce this problem. It could be fixed by close and restart Firefox. But it keeps happening after certain time.

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Similar Messages

  • IE 11 links open to Blank page after last Window update

    IE 11 links open to Blank page after last Window update, I tried every trouble shooting and suggestions I could find in all forums but to no avail.
    Operating system Win 8.
    will try any suggestions and report back.

    Hi,
    Not sure whether you have tried these methods, if yes, keep trying the others.
    1.Run IE with no add-ons firstly.
    Click Start -> All Programs -> Accessories -> System Tools -> Internet Explorer (with no add-ons).
    If works, please follow the steps to narrow down which add-on cause the issue.
    Start IE>Press Alt to show the menu bar>On the Tools menu, click manage add-ons>under show, click All add-ons>disable half add-ons one time for quick narrow down>restart IE.
    2.Try resetting IE.
    Start IE>Press Alt to show the menu bar>On the Tools menu, click Internet options>Advance>Reset>restart IE.
    3. This is caused due to some registry problems occurred. To resolve this issue, follow the below steps:
    Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
    Type regsvr32 actxprxy.dll in the Open box, and then click OK.
    If the command was successfully executed, you will receive the message ‘DllRegisterServer in actxprxy.dll succeeded’ window.
    Restart the Internet Explorer
    4.if still not work, run system restore.
    Start>type system restore in the search box>click system restore>follow the steps in the wizard to choose a restore point.
    For more information, please see:
    Nothing happens when you click a link in Internet Explorer
    http://support.microsoft.com/kb/175775/en-us#method4
    Hope this helps,
    Ada Liu
    TechNet Community Support

  • I can't get firefox to pull up last sites, also there is no blank page option

    Firefox used to pull up last websites that were open in prior session. It no longer will do this, also there is no option for blank page. I went into tools and options, checked when firefox starts open last websites and tabs, but it won't do that. I'm using win 7, 64bit. Can anyone please help?
    Thanks
    bldoug

    Hello sandyn, see [http://kb.mozillazine.org/Preferences_not_saved#Corrupt_or_damaged_prefs.js_file Corrupt or damaged prefs.js file]
    thank you

  • Tab Preview in Windows 7 Taskbar

    Hello everyone,
    I'm wondering if it is possible to disable tab preview in Safari 5 on windows 7 taskbar. I find this highly annoying as i just want to see individual instances of Safari (Should i have them that is) and not X amount of tabs in a seemingly huge jungle of tabs!
    I have looked and read posts asking the same thing and yet there seems to not be an answer. Perhaps it is not even possible but i'd like at least it to be confirmed. Surely that would be a simple user preference.
    Hope someone can help.
    Thanks
    Tom

    There is a preference in the Options window that controls this.
    Open the Options window (click the Firefox button, then select Options). In the Options window go to the Tabs section and make sure the preference "Show tab previews in the Windows taskbar" is selected.

  • Firefox will no longer load my hotmail account - goes to microsoft us and there is a blank page

    I have long had a hotmail account. I can no longer access this through firefox although explorer does so with no problems. I have gone to ninemsn.com.au and clicked on the hotmail button. It tries to open a page but goes to some long address starting with mocrosoft US. The page is blank and nothing further happens.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I am using Firefox 4.01 & "Send Link" in the File menu opens a blank page. Firefox & Windows 7 say "Windows Live mail" is the default program. How do I get "Send Link" to work properly?

    I tried suggestions given on the URL below but it still doesn't work.
    http://support.mozilla.com/en-US/kb/Changing%20the%20e-mail%20program%20used%20by%20Firefox?s=email+page&as=s#w_setting-firefoxs-mail-client

    Not every web mail service is compatible with the '''mailto''' settings in Firefox.
    https://support.mozilla.com/en-US/kb/Changing%20the%20e-mail%20program%20used%20by%20Firefox#w_using-webmail-services
    '''If the webmail service you want to use is not available in the Applications panel of the Options window, you can use an extension to add support to your webmail services:
    * This Addons.Mozilla.org search for mailto lists several extensions that may be suitable for different webmail services. '''

  • When Firefox starts, there is a blank page momentarily and then a glazed appearance of the background. How to fix?

    I am using windows 7 and Firefox has been working well for 2 years until yesterday. I cannot access anything except to close the window. Interestingly, my laptop accesses Firefox well and is connected to the desktop via local wi-fi.

    Hello,
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Why there is blank page when generating dunning letters

    Hi Expert,
    I setup 4 levels for dunning procedure and selected "Always dun?" and "Print all items" for all 4 levels in print parameters. When I printed the level 2 dunning letter there was one blank page generated beside the dunning letter itself. When I printed the level 3 dunning letter there were 2 blank pages generated besides the dunning letter itself. When I printed the level 4 dunning letter there were 3 blank pages generated beside the dunning letter itself.
    Did you have any experience like this? And how did you solve this problem (suppress the blank page)?
    Thanks,
    Norman

    Hai Norman,
    You can change the Dunning Form Page windows in SE71 T.Code
    Check it once in Dunning form in FBMP t.code, better ABAPer help.
    Regards
    Madhu I

  • Framemaker 8. Landscape Chapters adding blank page every other page.

    Hi,
    I am currently using FrameMaker 8 to create my book. I have multiple chapters, both Landscape and Portrait. I use Framescript > Scripts > Insert Reports to insert PDF documents into my chapters. I have an excel spreadsheet that has two columns code/pdf file name that the Framscript uses to insert the report. I insert a code into the chapter, and from that code it references the matching PDF file to insert.
    I have been running this without any issues until now, because now in the Landscape chapters it is adding a blank page between all my pages. So every other page is blank. For example if the PDF file had 2 pages now I have 2 pages and 2 blank pages. On the blank page I do have a symbol (RS Report Spacer) that appears. I could delete it and the blank page goes away. But this can be troublesome since I have hundreds of pages and every time I run my book the blank pages will reappear.
    I have tried Pagination to delete blank pages but to no avail. It does not delete the blank page. The weird part is that for my Portrait chapters this problem does not occur. I am writing this with a small glimmer of hope somebody can help me.
    Thank you in advance,
    Dan

    Hello there @sirknite ,
    I read your post about your printing out blank pages from your Windows 8 system however, this issue does not occur on another PC. In the details you have mentioned, it seems to be an issue with the software on your Windows 8 system, as the other computer does not have a problem. To test this theory, try printing from another program to see if blank pages will still print out. This way, we will know if the problem is originating in one specific program, or in the printer driver.
    Skipping ahead a little bit, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Try printing again, and if any blank pages still print out, try Uninstalling the Printer Software, restarting the computer completely, and download and reinstall the printer here: HP Photosmart Full Feature Software and Drivers
    Please write me back with your findings and all of the results from your troubleshooting. Include which programs you have tested out and any other helpful information you may have came across.
    Happy New Year!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Blank page showing when changing from two column to one column pages

    This is the scenario:
    Document with two master pages - Page1 has two content areas - left column and right column, Page 2 has one content area the full page width named 'FullPage'
    One page set named PageSetOne - with multiple subforms, each with Pagination setting of Following Previous and Continue filling parent.
    Second page set named PageSetTwo - this has a single subform with Pagination setting of place on Page2. The child subform has itself a subform with Pagination setting of Place in Content Area 'FullPage'.
         This page set is initially set to be Hidden.
    Third page set named PageSetThree - this has a single subform with Pagination setting of place in Page 1 and a child subform with Pagination setting of Following Previous.
    [Obviously I am simplifying names and content here].
    The problem is this: when in design mode, there is a blank page showing at the end of the document whenever there are sufficient subforms in PageSetOne such that subforms are displayed in the right hand column.
    When subforms are removed so that nothing is showing in the right hand column then the blank page goes away.
    I have put a marker subform immediately after the last subform in PageSetThree and can see that the blank page is showing after this.
    Also, the following problem:
         When in preview mode, the extra blank page at the end does not display (which is good)
         BUT if the hidden PageSetTwo is made to be visible AND there is content showing in the right hand column prior to it,
         THEN a blank page is displayed just before the newly displayed PageSetTwo page (a single column page on Master page Page2).
    I have tried every combination of Pagination Place before and after settings and can find no way to avoid the blank pages.
    Does anyone have a clue as to what is going on and how I can avoid these blanks showing up?

    I have finally managed to solve this problem.
    The issue was not a subform extending too far out, it was a pagination setting, as Niall suggested.
    I created a blank document to analyse the issue closely, and lo, my new blank doc with all default settings, worked perfectly.
    So I revisited my forms and compared the pagination settings subform by subform.
    This is what I had to change to ensure that all pages flowed with no extras:
    PageSetOne (which is supposed to show using the two column master)
    set the top page Place = ‘In Content Area Leftcolumn’ and After=Continue filling parent
    All child subforms each with Pagination setting of Following Previous and Continue filling parent.
    PageSetTwo (to show in the full page column Master)
    set the top page Place = ‘In Content Area FullPage’ and After=Continue filling parent
    All child subforms each with Pagination setting of Following Previous and Continue filling parent.
    PageSetThree ( back to two column master)
    set the top page Place = ‘On Page1’ and After=Continue filling parent
    All child subforms each with Pagination setting of Following Previous and Continue filling parent.
    I discovered that the critical setting was for PageSetOne. The After setting needed to be Continue filling Parent
    Once I had those settings in order then the form performed as required.
    This has been a frustrating learning experience but at least ultimately successful.
    AJ

  • ECP & OWA - Blank pages

    Hi All,
    I followed the Exchange help files to ensure that all forest, domain and local server pre-requisites were installed, in the correct order, with time being allowed for replication of changes across the forest. The install went well with no errors reported.
    I am however having an issue with accessing the ECP (OWA behaves the same) in that the URL changes to https://serverFQDN/owa/auth/logon.aspx?url=https%3a%2f%2fserverFQDN%2fecp&reason=0 ( originally entered as https://serverFQDN/ecp
    )and all that is produced is a blank page.
    Environment:
    Windows Server 2008 R2 (all updates applied) freshly installed in a child domain using a Domain Admin account granted Enterprise and Schema admin rights and added to the Organisation Management group. No previous Exchange organisation
    existed as this is a freshly configured (pre-production) environment that I intend to migrate into. Both the MAilbox and CAS server roles are installed, the server has 16 GB of RAM
    Following research on the web I have already tried:
    Uninstalling and re-installing Windows Identity Foundation
    Checking the mailbox for corruption using the EMS. The mailbox seemed ok but to be sure I created a new user, ran the enable-mailbox command, added the user to the Organisation Management group but still get exactly the same issue
    Running %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -ir
    Using the EMS to perform a Test-EcpConnectivity, it failed even with the test user created with the supplied creation script
    I can't find any consistent entries in the event logs. Any suggestions?

    Hi,
    Please try recreating ECP & OWA virtual directory 。
    Reset Client Access Virtual Directories:
    http://technet.microsoft.com/en-us/library/ff629372.aspx
    And is there any error on the page when you open ECP or OWA ? such as HTTP 500…
    Wendy Liu
    TechNet Community Support

  • HP 6310 started printing 2nd blank page

    Hello,
    After a year or two of use, my printer ALWAYS prints a second blank page after the document is printed. Paper jams are also getting more common. Is there a "fix" or is there somewhere I can get a repair done if needed.
    Thanks,
    Tom Allen

    Hello there @sirknite ,
    I read your post about your printing out blank pages from your Windows 8 system however, this issue does not occur on another PC. In the details you have mentioned, it seems to be an issue with the software on your Windows 8 system, as the other computer does not have a problem. To test this theory, try printing from another program to see if blank pages will still print out. This way, we will know if the problem is originating in one specific program, or in the printer driver.
    Skipping ahead a little bit, try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Try printing again, and if any blank pages still print out, try Uninstalling the Printer Software, restarting the computer completely, and download and reinstall the printer here: HP Photosmart Full Feature Software and Drivers
    Please write me back with your findings and all of the results from your troubleshooting. Include which programs you have tested out and any other helpful information you may have came across.
    Happy New Year!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • How to remove blank pages from WebI Report in view page layout option

    Hi,
             I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
    Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
    Thanks in advance.

    Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
    Now check if there are any cell going into second page.
    - if there are any blank cell which is there after table.
    you have to check formating very carefull.

  • Extra Blank page in XML Publisher report

    Hi,
    I am getting extra blank page in XML publisher report.
    The RTF has two pages and each page has one table.These two tables will be populated with data based on some if condtion.
    eg:
    In RTF:
    for each Header
    if PMA='Y' THEN
    Table1 data in 1st page
    end if;
    pageBreak
    IF OTC='Y' then
    Table2 data in 2nd page
    END IF;
    end for each
    And also another issue is: The data is starting from the same page instead of new page.
    Please help me in solving the issue.
    Thanks,
    Srinivas

    Hi,
    Thanks for reply.
    I am using <xsl:attribute name="break-before">page</xsl:attribute> page break.
    I tried split-by-page-break also,but still its not resolved.
    Today I have noticed one thing: When generating this report locally,then there is no blank page coming.But when generating from APPS then blank page is coming.
    Please help me to resolve this issue.
    Thanks,
    Srinivas

  • Blank page printed

    I generate report with HTML style sheet. After that, I print my report from IE browser. There is one blank page printed at the end of the report.
    Why ? And how to remove this page ?
    Thanks
    null

    I have another poblem, and it look like you've solved it already,
    the question is
    I have only forms server instolled with web db listner (I do
    NOT have reports server, so I serve forms and reports both from
    forms server operating sysetm WinNT/2000)
    I want to show output to my user in HTML STYLE SHEET format as
    soon as he/she selects one of the menu items. ( I am calling
    reports using run_form)
    How can I set my out put as HTML STYLE SHEET ? ( directly in
    the borwser at runtime)
    I did add the parameter for DesFormat = 'HTMLCSS'
    as
    add_parameter(pl_id,':DesFORMAT,text_parameter,''HTMLCSS');
    but I don't get the out put in style sheet.
    I also tried to set up tool----> preferences
    and run time values to HTMLCSS !!
    BUT,
    It is just a plain HTML with data, and no colors or
    borders !!
    Regards,
    vivek

Maybe you are looking for