There is a large whitish stain on my imac 21,5 screen. How can I solve this problem?
My imac came up with this stain on its screen. It seems to be condensation behind the glass screen, but I'm not sure. If I rub it A LOT with a cotton cloth, it tends to disappear, but it comes back. I haven`t used any cleaning product ever, so I feel it`s a problem of the imac itself. Please, how can I solve this? I've had this machine for almost 2 years now, so it is not in the warrant period anymore, I guess.
Is the stain maybe on the back of the glass? It's an easy job to take the glass off to give it a thorough clean. Just to emphasise that as the screen is held on by magnets there is a very strong pull when you are putting the screen back on and if you are not prepared for it it could take you by surprise and snap back rather too quickly. I put the tip of my finger behind to stop it slamming shut. Repositioning of the glass is easy as there are guide pins.
All at your own risk, of course, and best to turn off and unplug the Mac whilst you do this.
http://www.youtube.com/watch?v=ONCdGHe0Uxs
P.S. I use the suction cap from my SatNav to pull the screen off.
Similar Messages
-
Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?
Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies? -
I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
ThanksAfter a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie -
There's green mark has been shown on the left side of the screen on and off . How can I solve this problem ? Please.
iMac (27-inch Mid 2011), Mac OS 8.6 or Earlier
Not possible. Which OS is currently installed on your iMac?
If your iMac came w/DVDs when you originally purchased it, run the Apple Hardware Test and post back the results.
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it. -
ı have ip4s, today i noticed that there is a yellow area left of screen. How can i solve this problem ?
live with it. Or you can bring it in to a 3rd party repair shop and see what they say. However, anyone other than Apple touching that phone will void the warranty and any support on that phone forever.
-
i have the new version of i tunes and it says it cannot ascess my ipad4 and asks to upgrade and reset how to solve this????
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
I recommend syncing to iTunes first as well as creating a backup - just in case something goes wrong.
Then you can update your iPad. Go to Settings > General > Softwware Update to start the process. -
I have to send large files like 5MB or biger via mobile phone, but in that cases phone is telling mi to plug in power. And when I do that, there is no problem to send the file. For smaller files there is no problem. How can I solve the problem? Because when I'm not at home I can't plug in the power.
hi,
I am sending file from server to client i.e client will request for a file and service will send it back....... no socket connection is there...I am using JBOSS and apache axis.
pls help me out.....
Rashi -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
On my iPad 2 I can nolonger view maps. It says there are JavaScript errors. How can I fix this problem?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
I have created a Blog in iWeb and uploaded it to an FTP server. It works fine, except that the 'Comments' facility is missing. When I upload the blog to MobileMe the 'Comments' facility is there and working great. How can I solve the problem on the FTP server Blog.
You haven't a problem. You simply did not read the iWeb Help :
-
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.
2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that. -
Hi there, I made the monthly payment for the Adobe apps, i managed to download Illustrator and Photoshop but can't seem to download Indesign. It says that "file seems to be corrupted... try later". How do I solve this problem?
Hi shuster9,
It seems the downloaded setup for InDesign has got corrupt.
Could you please clear the TEMP from your computer and then retry.
Thanks,
Manish Sharma -
"It started malfunctioning so I uninstalled it".
That may have been necessary, may not have.
"I tried to reinstall and there is persistent error in installing. What is the problem?"
No clue.. you've not provided us any details.
"How can I solve this?"
Search these forums or google for the error occurring or post the error so that others can help you. -
I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?
Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.
Maybe you are looking for
-
Sent messages only appear in the sent folder after restarting Thunderbird
Hi, my problem is that sent messages do not appear in the sent folder unless I restart Thunderbird. I have the sent 'copies' box de-checked as if not although it syncs I end up with two copies (of sent messages). I am using Thunderbird 31.2.0 on OSX
-
Camera Raw 4.4.1 has bug with Canon 40D raw files
I shoot with the Canon 20D, 30D, 40D, 1DMII, and the Rebel XTI. The Raw processor is showing an anomaly only with the 40D files. When I load raw images, and when the image is displayed, it is shown at one setting. Then in 3 seconds, its updated again
-
Hi All, I have this query regarding payment run. We have the standard program RFFOEDI1. In APP if we set variants for this and click on Printout tabs, Idocs get generated. This one is clear. But we have in FBZP, in payment method in country>form data
-
Pages: First page different in header?
In Pages for iOS (iPad), how do I make the headers on my first page different? I wish there was an inspector like on the Mac version :( If there is I would love to know how to find it....I have a white MacBook so Apple has graciously taken away the c
-
Ok, ive hunted for quite a while on this issue and people dont seem to have the answers. This is what I'd like to know... I keep getting a timeout on trying adsl-start and the same values work on winfroze on the same box. for setting up a straight di