There is a little x in the corner when a document is supposed to show. Help!!! I need my document!

I can't recieve my documents. There is a little x in the upper left corner in a black box and the document is blank. How do I get my documents. Please call me [telephone number removed by host].

I have windows7 and was using the current version of Adobe. I removed it and uploaded an older version and that didn't work also. I think it has something to do with my computer because I am able to right click and save and open it that way. Unfortunately there are some government documents that don't allow you to right click. The only way to get the document is to left click on the link.
[private data removed]

Similar Messages

Little warp on the corner of the top case

I was working in the library today and someone kicked the power cable which caused the fail down of my MBP just purchased a month ago from apple store, now there's a little warp on the corner of the top case, not too bad but make me feel super weird.
Everything else's working fine now but I just can't handle the little warp, and it wasn't the first time that the megasafe failed to protect my computer, it fail several times and finally it hit the ground right on the corner and warped.
I just booked a call from apple tomorrow morning and see what I can get... I'm sure the topcase thing's not gonna be a super big deal for them to fix or replace since the warp is quite small but I really don't want to spent a buck for it... Since I'm having a very tight budget now for my new school's coming.
Euhhhh megasafe

Dents from drops and other impacts are not covered by your warranty. If you want your top case replaced (which is the only way to fix it), you'll have to pay.

I have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it

i have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it,, i have iphone 5

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

I Keep getting a little photo in the corner of my photos that I export

When I export photos sometimes a sometimes it puts a little photo in the corner of the main photo. this little picture is identical to the main photo and just sits in the top right. If you post your email for me I'll send you an example. Does anyone know how to get rid of it?

Are you using 1.4? If so, kill it and get 1.4.1 which should correct that bug.

Is the Apple TV on sale now the latest one or is there a new one right around the corner?

Is the Apple TV now on sale through the Apple Store the latest version or is there a new one right around the corner? Want to buy one but want the latest version.

nobody knows if or when a new one will be released

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?

Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

when i send a PDF file to out side print, some of the things I aded dose not print.
Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

I feel a little tingling in the fingers when I touch the Ipad's back side

When I plug the iPad for charge the battery I feel a little tingling in the fingers when I touch the Ipad's back side, Could it be a problem?

Cables can break due to flexing over time, especially at the plug. I've had that happen a couple of times. Very high chance that's the problem.
Can you try the cable with another device? Or borrow somebody's cable and try it with your iPad?
And for sure a genius at an Apple Store or at a retailer could test that for you no problem.

Can't open the illustration. There is not enough room for the window. Increase document area and try again?

When i double click on a file in AI (CS6) I get the message: Can't open the illustration. There is not enough room for the window. Increase document are and try again

We can't know. We know nothing about your system nor your documents since you haven't told us.
Mylenium

Why is there a thin vertical line on the copy when I use the feeder?

There is a thin vertical line on copies when I use the feeder but not when I copy from the glass. The copier is new. Any ideas?

Hi Ccorning, When a vertical line (top to bottom) is produced only when using the feeder (ADF) of your laser product, the issue would actually be due to a small mark or debris on the scanning glass area that sits directly under the left panel cover of the ADF. This occurs because as the paper feeds through the ADF and across the scanning area, every inch of the paper passes over the small mark which gets picked up by the scanner. This then produces what looks like a line. However, thorough cleaning can resolve the issue. You can clean the platen glass and the underside of the ADF by following the procedure below. 1. Turn OFF the Main Power Switch and disconnect the power cord. 2. Open the ADF. 3. Clean the ADF scanning area on the left side of the platen glass and the same area on the lid (the area that would touch the scanning area when the lid is down) with a cloth dampened with water. You will want to carefully and fully clean the glass in the ADF scanning area. Look for scratches, tiny spots and marks of any sort. If marks are noticed, you may have to clean the platen glass up to three times or more depending on what created the mark (i.e.. correction fluid, pen ink). You can use a soft lint free cloth either dry, with glass cleaner or water to clean the glass and may have to scrub until it squeaks to remove certain types of marks. NOTE: Please spray the cloth with the cleaning solution and not the glass. Another way to ensure the mark is removed is to use a credit card by placing in on a angle and sliding it across the glass in one direction. The plastic of the card will not scratch the glass. You can then lift the credit card when reaching the end of the glass and return to the other side to slide it across again. Then wipe the area with a soft, dry cloth. 4. Close the ADF. 5. Reconnect the power cord and turn ON the Main Power Switch. Caution: Be careful not to get your fingers caught. After cleaning the glass, run 4-5 blank/clean pages through to test it. If the thin black line still appears, please try cleaning the scanning area again as a mark on the glass is the only cause for this. If the issue persists, there may be a scratch in the glass which would require service. If further assistance is needed, please feel free to Contact Us.

HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

There is a rewind sign on the corner and it wont go away?

ok well there is this rewind in the corner and i try to get it away but it wont go away i tryed turning it off and then on so any suggestions?

i rewind sign
erm i dont havent seen this before
erm try to reset your ipod nano toggle the hold switch then press and hold menu and select for 6-10 seconds
or restor it using the ipod updater

I could not exit Safari so had to Force Quit but when I open it goes right back to the Yahoo home page that would not close. There was a little light under the Safari icon which told me that Safari was still running. Any ideas??

I could not get out of my Yahoo home page in Safari on my Imac. I had to force quit but when i opened back up the little light under the Safari icon was still on and when i tapped icon I was right back to the Yahoo page which would not close. Any ideas???

Quit Safari (by force if necessary.) Relaunch it by holding down the shift key and clicking its icon in the Dock. That will stop the page from reloading automatically.

HT4623 I lost my apps and iTunes after a restore, but it says there isn't enough space on the iPhone 4. How do I know how much space needs to be freed up? I keep deleting photos and videos, but I'm still getting the same message.

I did an iphone 4 software update. It then asked me to do a "restore" in order for me to be able to use the latest iTunes. I did a "restore" to "factory settings" (this was the only option listed) thinking I'd be able to sync later and get everything back and ended up losing all my purchased apps and iTunes. When I open iTunes, "Welcome to your new iphone" and it says I can re-do the "restore" and choose my lastest update. I assume this will give me back my apps and iTunes. When i choose to do this, it says there isn't enough space on the iPhone. How do I know how much space needs to be freed up? I keep deleting photos and videos from the phone, but I'm still getting the same message every time I re-try. I don't want to delete everything, but I don't know what to do...? Thanks!

Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

There is a little x in the corner when a document is supposed to show. Help!!! I need my document!

Similar Messages

Maybe you are looking for