There is a problem transferring the outline, error # 0

Hi,
We are experiencing "There is a problem transferring the outline, error # 0" in EAS 9.3.1. Restarting the EAS shows no result. What else can we do?
Thanks

We cannot just restart the service, but also down the server. Thanks.

Similar Messages

  • There is a problem transferring the outline # 1 030 006

    <p>It seems to be a big problem but the solution is really verysimple: just restart EAS.</p>

    Hi,
    You have tried restarting EAS ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • I used to get all my emails no problem. Now I get a "Can't Load Mail ... there is a problem with the application error. I have reported it many times but zero response from Apple

    help plz

    Hello,
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/TS4002
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    If all steps have been processed, see the section labeled Additional Information in the first article.
    Cheers,
    Jason H.

  • There is problem loading the outline into the memory, error # 1,250,005

    Hello,
    I am getting error message when opening ASO outline on edit mode in EAS 7.1.5 version. EAS server using weblogic and MYSql.
    Error Message:
    There is problem loading the outline into the memory, error # 1,250,005.
    Please let me know if any have experienced same issue or any suggestions.
    Regards,
    DS

    That error is documented as:
    ##1250005 Error [%s] Creating Environment For Outline Paging File: %s
    It sounds like it may be an issue with your temp directories (disk space?) as I believe it is going to copy the outline to a temp directory locally before opening it. That is where I would start looking..
    Tim Tow
    Applied OLAP, Inc

  • Hi, I am trying to update an iPhone 4 from iOS 4.3.3 to iOS 7.0.4, and every time I try to update it comes up with an error message saying that there was a problem because the network connection was reset. Is there any way I can get past this and update?

    The full message said:
    There was a problem downloading the software for the iPhone "Judy's iPhone 4". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later.
    I am trying to update the iPhone for my grandmother, Judy, as I am leaving for Paris on Wednesday night and we want to have Facetime installed on her iPhone before then, so we can stay in contact with each other. It is the simplest way for this to happen but the program simply will not allow me to update her iPhone.
    Is there any way to get past this error and update her iPhone? Any help will be greatly appreciated.

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

    when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
    i am using office2007  with windows7 premium home edition.  i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
    it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
    a real PITA.   anyone have any solution for this? Thanks 
    ken yanow

    Hi,
    Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
    Click the Microsoft Office Button, and then click Excel Options.
    Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
    check box in the General area.
    Click OK.
    If the problem cannot resolve, the Run as administrator may selected.
    Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
    Right-click EXCEL.EXE > Properties >
    Compatibility tab.
    Under Privilege Level, uncheck Run this program as an administrator
    check box.
    Best regards.
    William Zhou
    TechNet Community Support

  • I can not upgrade to quicktime 7.7.3 for windows vista.  Error message says there is a problem with the program installer.  Any clue as to how to get around this.

    I can not download quicktime 7.7.3 for windows vista.  The error message says that there is a problem with the windows installer.  Any clues?

    The error message says that there is a problem with the windows installer.
    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

    When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

  • Excel won't open and error message There was a problem sending the command to the programe

    Hi there
    I'd be grateful for your help.
    I've just bought a new laptop and installed Office 2013.  I used Excel 2013, did what I needed to do and saved it.  This was 5 days ago.
    Today, I've tried opening the file from my desktop and get the error message 'There was a problem sending the command to the program'.
    And when I try to open Excel to do the DDE fix, which seems to be the best suggestion, I can't open Excel at all.  I've tried to get into it from the Apps screen.
    Any help would be gratefully appreciated.
    Thanks

    Don't seem like this can be fixed so I went back to version 6.0.2 which works good.
    I have Chrome now as my default browser and will not use fire fox until they fix it!
    Chrome works great!

  • There is a problem with the security certificate of the proxy server. Error code 18 and 38.

    Hi All,
    After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
    Exchange 2013 on a remote location with a CA-certificate.
    Outlook 2010 and 2013 on different locations, locally installed and on RDS.
    When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
    name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
    After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
    site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
    certificate is invalid or does not match the name of the site."
    Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
    - restarting mailserver and AD;
    - restarting switches;
    - restarting routers;
    - restarting RDS, AD and all other servers;
    - bypassed proxyserver for RDS;
    - created a new profile;
    - checked recently installed updates;
    - checked certificate on mailserver;
    - checked RDS on a different location, working fine.
    Nothing helped, what can I do next? Please advice.
    Regards.

    Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
    The first message can be suppressed by adding this to the Exchange config:
    set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
    set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
    Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
    this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
    Not completely where I want to be, any help regarding the second alert is greatly appreciated!

  • SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

    Hi There,
    Need your assistance on the issue that we are facing in prod environment.
    We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
    and able to view the reports in Favorite Reports folder. But when I click on run Report we  are getting the below error  "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
    In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
    Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
     Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
    Regards,
    Sanjeev Kumar

    Duplicate thread：
    http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error message in time machine: "There was a problem with the user name or the password of the network

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

    I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
    "The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
    Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
    I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
    Best regards,
    John

  • Error while downgrading from ios6(beta4) to ios5.0.1.. i am getting error "there was a problem downloading the software for the iphone" any idea???

    Hi,
        I tried to downgrade my iphone4s os from ios6 (beta 4) to ios 5.0.1(factory settings).
    but all the time i am getting the following error.
    "there was a problem downloading the software for the iphone "rams's iPhone" "
    pls help me to downgrade my device.
    I am from india, ios6 maps are not at all working for india so i want to go for old version so that i can have google maps.
    Regards
    Ram

    You couldn't go back to 5.0.1 even if you wanted to, it would have to be 5.1.1 but if you had a signed copy of the iOS 6 beta on your iPhone I don't believe you can go back.
    You can try Google to see if you can find a workaround. Despite the map issue, if you are a developer don't you need the Beta on your iPhone?

  • Getting Error while deploying the autohosted event receiver in office 365 ( ErrorDetail: There was a problem registering the app principal.):

    Hi,
    I was successfully able to deploy my auto hosted event receiver in office 365 and it was working. I did some changes on code and try to deploy it again but now it through same error always wheneven i deploy it.
     CorrelationId: 2ef8a311-f1cf-4ee7-be1a-1125c5231e1c
    2>        ErrorDetail: There was a problem registering the app principal.
    2>        ErrorType: Configuration
    2>        ErrorTypeName: Configuration
    2>        ExceptionMessage: An error occurred while attempting to execute a principal management operation.  Please contact your administrator.
    2>        Source: RemoteWebSite
    2>        SourceName: Remote Web Site Deployment
    2>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
    Please help me on this. Not sure what this error is indicating.
    Regards:
    Sanjay Joshi

    Hi All,
    I have tried same thing in different different environment.  Different environment mean different azure account and office 365 account. But still the issue persists.
    i feel some issue in my office network or in servers. Because couple of days back same thing was working in my private virtual machine in my private network instead of office.
    For me i observe a basic problem in this network.
    The pop up to provide trust to the app (that come with title "Grant permission to app") comes while i deploy the solution and gets close automatically without clicking trust.
    Might be this could be the reason for me ?. because closing of pop up is not providing authentication to my app.
    This happens in every server in my office network.
    Any suggestions on that. Thanks in advance.
    Regards:
    Sanjay Joshi

  • HT4489 I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

    I cannot import my vCard to iCloud...it shows error.."1 contact could not be imported because there was a problem reading the vCard"

    The vCard must not be a compatible format.  (Unfortunately, there are multiple formats.)
    Often your carrier can transfer contacts between devices from different manufacturers.  Try visiting your carrier's retail outlet and see if they can do this for you.

Maybe you are looking for