There is a problem with launching iPhoto.
Every time I try to launch it crashes and says "You can't open the application iPhoto because it may be damaged or incomplete". I don't know how to resolve this issue If you can help. Thanks
Reinstall it.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Similar Messages
-
Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?
Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?
I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!
-
IPhoto 11 Upgrade-"There is a problem with the subscription"
I am running iPhoto 09 right now & I'm trying to update to 11 so that I can use 'Photo Stream", plus the benefits of iPhoto 11 of course. When I go to update I get to the subscribe button & I get the above messege: "There is a problem with the subscription" followed by "Request to the server macappstore://itunes.apple.com failed." Now I'm stuck on how to upgrade from iPhoto 09 to 11 ?? Any suggestions? Should I call Apple??
Thanks...Follow the procedure on the page linked below to repair the database, and if that doesn't work, to rebuild it:
Rebuilding the iPhoto library
If you still have the problem after doing that, use the procedure on the page linked below to find and remove the invalid items:
Connection Failed, Server Does Not Exist -
I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply. -
Absolutely INFURIATING.
I have spent absolute hours building a photo album for the first year or my sons life. Sorting through quite literally thousands and thousands of images. Got a brilliant looking album using 177 of them.
Now everytime I try to check out it won't get past page 1 of building the book.
It says the following "There is a problem with the photo with the filename "null". The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your book.".
The images all look perfect. I have even tried taking them out and re adding the first page images from the library.
Same problem.
This is so annoying. So far I have NOT been happy with this iphoto application having nothing but problems with missing thumbnails. Corrupted images. Things that have never happened to me using a windows machine.Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library. -
"there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)
We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!
Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
I got the iPod touch, when i went to connect it to my computer to upload my music to it, It said that I need to upgrade to 10.5 but when I did I got the message below. So I tried uninstalling itunes and quick time and I cant download it at all and still get the message below. I have NO itunes on my computer now. =(
The message I get is::
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
I have no idea what this message means or what to do....There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
Trying to open a streamed PDF in an IFRAME in Internet Explorer 9 on my Win7 64bit machine.
This results in the following dialog:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
The PDF is streamed (not read from disc) from a servlet in our Java WebSphere environment and the call looks like this:
https://intranetserver.com/myapplication/OpenDocumentServlet.pdf?documentToOpenID=1
The Servlet sets content-type header application/pdf and content-length and writes the bytes to the buffer.
Does the error dialog even come from Acrobat? When the dialog opens there is no active AcrReader process visible in task manager.
Please advise!
Meddelandet redigerades av: p b
Solved. Our IT dept. responsible for packaging and deployment repacked and redeployed 11.0.9. Unknown what changes were made to make it work.I don't know what acrofix.exe is; can you explain?
Issue
Nothing happens when you launch Acrobat 30 days after installing a CS6 suite.
Solutions
Important: Perform the solutions below in order. Do not continue further if an earlier solution resolves the problem.
Solution1: Install the patch for Acrobat installed as part of a CS6 (Windows Only)
1. Log in to your Windows computer as an Administrator.
2. Click the following link to download the patch file:
Acrofix.zip
3. When prompted "Do you want to open or save this file?,” click Open.
4. Extract the file. The location varies depending on your operating system and the utility.
5. Double-click the extracted Acrofix.exe to begin the execution.
6. If the execution is successful, Command Prompt closes automatically.
7. When the execution is complete, launch Acrobat.
or
Solution2: Install the patch for Acrobat installed as part of a CS6 using Command Prompt (Windows Only)
1. Run the Command Prompt as an Administrator.
2. Navigate to the location of the extracted hot fix in Solution 1 (Step 4).
3. Type Acrofix.exe to execute it.
4. If the execution is successful, Command Prompt shows Exit Code:0
5. When the execution is complete, launch Acrobat.
Solution 3: Reactivate Acrobat through another Suite product
I will try your cleaner, thanks
[private data removed] -
When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?
using MSICUU2.exe didn't help me. But, the new replacement app did:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
I fixed my problem like this:
Here's the deal -
1. can you install itunes via the APPLE SOFTWARE updater?
I couldn't so I downloaded ITUNES and tried to install it that way. Hence I got the same error hang as you. Nothing worked, (Multiple attempts at uninstall reinstall, stopping of Services, Reg cleaners etc..)
2. If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program.
OK so I couldn't find a Download for this. But: if you have WINRAR, open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file. Execute the APPLESOFTWAREUPDATE.MSI separately. And you will not be able to install it and have a similar issue as per your Itunes install. This of course leads you to believe that the Itunes.exe install is also installing all of these components including the applesoftwareupdate silently. It must BOMB at that portion of the install and you are done.
3. Your goal now is to get the applesoftwareupdate installed. How do you do this. Well - here is what I did.
a. downloaded and RUN a PC Installer FIX it tool from Microsoft. This is a replacement for the older MSI fixer they used to use.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
b. It will list programs to attempt to fix.
choose AppleSoftwareUpdate.msi
c. Once it is done, then reinstall apple program updater using
AppleSoftwareUpdate.msi
Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
(Please note: that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN: services.msc to get there - although this man not be necesarry.)
Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu) it should list ITUNES
select ITUNES from here and it will update.
KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program. If that program is not working fix it. Then Bingo.
I am sorry to see folks having this problem for weeks.
APPLE, Spread the word. PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update. etc... Please improve your software updater program to check for invalid registry upon launching the app. This will prevent people thinking it is an APPLE issue. It appears to be a problem on your PC's registry settings for the APPLE Software update.
Bruno Ricci
Maybe you are looking for
-
Dear All How to enable free item check in Purchase Order .The field Free item is Gray in Purchase Order Regards sandeep
-
Good morning, My request is very simple - I work in an environment where General data and company Code data are already created for vendors. MM module is going to be installed and I would like to create the Purchase Organization view of the vendors w
-
How to use voltage signals as input signals into USB-6211
Hello everyone, I have a USB-6211 and a PDQ80A -quadrant photo detectot from thorlabs, i am trying to take three voltage signals from the PDQ80A into my PC using USB-6211 from NI. THese voltage signals are X,Y and sum (X+Y). Looking forward to your
-
Nikon Camera Profiles - LR6 CC
Hello, Today I took a few photos and noticed in LR6 CC that not all of the photos have the Nikon V2 profiles available. Some photos do and some do not. I'm not sure why? Shouldn't the v2 profiles be available to all photos ? Is there something I am
-
HELP! Converting fonts for preflight and end user review
I want to make sure the fonts are either embedded or linked to the doc so the end user can review my file. Once it is ready for print, what are the steps to make it print friendly?