There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan Hoedt

Does the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB

Similar Messages

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

I recently installed CS4, and I can not make a connection to my website. Message an FTP error occurred and cannot make a connection to host. The remote host cannot be found.

Open up your site definition (double-click on the site name in the File panel or choose Site > Manage Sites > Edit) and go to the Remote Info category. There, click Use Firewall (if it isn't already selected) - press Test to try the default firewall settings. If that doesn't work, click Firewall Settings. You'll see two relevant settings about 2/3 down - Firewall host and Firewall port. If Firewall port is 21, there probably is something blocking the port.
On Windows XP, you may have the Windows Firewall installed and blocking. Here's how you get to it:
To open Windows Firewall
1.
Click Start and then click Control Panel.
2.
In the control panel, click Windows Security Center.
3.
Click Windows Firewall.
Once you have that open, you'll need to set Dreamweaver as an exception to blocking:
On the Exceptions tab, click Add Program.
In the list of programs, click the name of the program (Dreamweaver) that you want to add, and then click OK. If the name of your program is not in the list of programs, click Browse to locate the Dreamweaver.exe in the Program Files folder and then click OK.
Hope this helps - Joe
Joseph Lowery
Author, Dreamweaver CS4 Bible

HT1365 Hi I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help

Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
Thanks

Hello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

Got a new LG in Anchorage and was told Glennallen, AK is in a service area. Got home and all I get is Message 41, Roaming.
I can make calls with WiFi connection but not on the road. Any idea whats going on?

Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
AdaS_VZW
Follow us on Twitter at @VZWSupport

HT1551 A prompt comes up on my TV screen when I try and purchase a movie "before you can make any purchases you must go to Itunes store on your computer and verify your account information". Have tried to do this to no avail - all my purchase and address

A prompt comes up on my TV screen when I try and purchase a movie "before you can make any purchases you must go to Itunes store on your computer and verify your account information". Have tried to do this to no avail - all my purchase and address details

it is a problem with the latest update. nothing you can do will fix it, besides rolling your apple tv back to the last update.

HT201342 I'm still confuse with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

I'm still confuse with this iCloud mail. I have 2 device which is iPhone and iPad, why every time I receive a mail from my iPhone it doesn't show on my iPad? Can you maybe help me out here thank you

The iphone and ipad must be connected to the same icloud account. Are you by chance using different IDs to connect from each device?

HT201210 Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Please can you help? How do i reset my lock screen on ipod. I have connected to itunes on the original computer it was set up on however the code i thought i entered does not work. thanks in advance

Connect the iPod to irs syncing computer and restore via iTunes/ Place the iPod in Recovery mode if necessary to allow the restore.

A key/value pair with this key already exists in the store

Hi all,
In the installation of PI components on the AS ABAP+ AS JAVA with finalization of the Java Addin the iam facing this problem :
In short it mentioning that the " A key/value pair with this key already exists in the store.", Please see below for more information....:
CJSlibModule::writeWarning_impl()
Execution of the command "/opt/java1.4/bin/java -classpath
/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedli
b/launcher.jar -Xmx256m -d64 com.sap.engine.offline.OfflineToolStart
com.sap.security.core.server.secstorefs.SecStoreFS
/usr/sap/PID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/PID/SYS/global/security/lib
/tools/iaik_jsse.jar:/usr/sap/PID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PID/
SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/PID/SYS/global/security/lib/tools/w3c_ht
tp.jar:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/l
ib:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/share
dlib:/oracle/client/10x_64/instantclient/ojdbc14.jar insert -s PID -f
/usr/sap/PID/SYS/global/security/data/SecStore.properties -k
/usr/sap/PID/SYS/global/security/data/SecStore.key admin/host/PID tern" finished with return
code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR      2007-02-15 18:35:29
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log
file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2007-02-15 18:35:29 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure
_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR

Hi Kamalakar
I think this problem happens due to wrong content of SDMKIT.JAR - incorrect crypto SDA is deployed.I dont know the installation procedure you followed because normally this error wont come.
I would rather suggest a work around seeing your problem
<b>Edit the keydb.xml exchanging [ERROR] with [OK]</b>
Follow the above step and restart your installation.
Do not forget to reward points:

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out. When i try turning it on there is no power. I connected to charger and the apple sign appears. After a while it shows iOS6 on screen and then asks me to connect

Hi, I dropped my i-phone 4 down the toilet 6 days ago and have left it in rice to dry out. When i try turning it on there is no power. I connected to charger and the apple sign appears. After a while it shows iOS6 on screen and then asks me to connect to i-tunes however my i-phone does not appear on i-tunes. Can you advise me what to do next?

Make an appointment at the genius bar and take your credit card. An out of warranty replacement is $199 for a 4S, $149 for a 4.

SQL Service Broker 2012: the connection was closed by the remote end, or an error occurred while receiving data: '64(The specified network name is no longer available.)'

Anyone can help with the below issue please? Much appreciated.
We have about 2k+ messages in sys.transmission_queue
Telnet to the ports 4022 is working fine.
Network connectivity has been ruled out.
The firewalls are OFF.
We also explicitly provided the permissions to the service account on Server A and Server B to the Service broker end points.
GRANT
CONNECT ON
ENDPOINT <broker> <domain\serviceaccount>
Currently for troubleshooting purposes, the DR node is also out of the Availability Group, which means that we right now have only one replica the server is now a traditional cluster.
Important thing to note is when a SQL Server service is restarted, all the messages in the sys.transmission queue is cleared immediately. After about 30-40 minutes, the errors are continued to be seen with the below
The
connection was
closed by the
remote end,
or an
error occurred while
receiving data:
'64(The specified network name is no longer available.)'

We were able to narrow down the issue to an irrelevant IP coming into play during the data transfer. We tried ssbdiagnose runtime and found this error:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>SSBDIAGNOSE -E RUNTIME -ID 54F03D35-1A94-48D2-8144-5A9D24B24520 Connect to -S <SourceServer> -d <SourceDB> Connect To -S <DestinationServer> -d <DestinationDB>
Microsoft SQL Server 11.0.2100.60
Service Broker Diagnostic Utility
An internal exception occurred: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
P 29830 Could not find the connection to the SQL Server that
corresponds to the routing address tcp://XX.XXX.XXX.199:4022. Ensure the tool is connected to this server to allow investigation of runtime events
The IP that corresponds to routing address is no where configured within the SSB. We are yet unsure why this IP is being referred despite not being configured anywhere. We identified that this IP belongs to one of nodes other SQL Server cluster, which has
no direct relation to the source server. We failed over that irrelevant SQL Server cluster and made another node active and to our surprise, the data from sys.transmission_queue started flowing. Even today we are able to reproduce the issue, if we bring
back this node [XX.XXX.XXX.199] as active. Since, its a high business activity period, we are not investigating further until we get an approved downtime to find the root cause of it.
When we get a approved downtime, we will bring the node [XX.XXX.XXX.199] as active and we will be running Network Monitor, Process Monitor and the SSB Diagnose all in parallel to capture the process/program that is accessing the irrelevant IP.
Once, we are able to nail down the root cause, I will share more information.

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

My iPhone 4s was stolen this weekend and I did the Remote Lock. What exactly does that do? Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

My iPhone 4s was stolen this weekend and I did the Remote Lock. What exactly does that do? Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future

Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Music on iPhone4 4 automatically shuffles music and shuffle is not turned on in anyway. Anyone know how to fix this or is anyone having the same problem? This didn't start until the big update a month ago!!

Anyone know how to fix this or is anyone having the same problem? This didn't start until the big update (5.0) a month ago!!
When playing music there is no shuffle button like there was before... On the playlist there is a shuffle bar but this does nothing when I touch it. It's either stuck on my music is messed up.
Any ideas??

Start playing a song.
Select the album artwork area for the song playing to reveal the scrubber for the song.
Is the color of the icon located at the right of the scrubber blue?
If so, that is the shuffle icon and blue means shuffle is on. Select the icon to turn shuffle off. White means off.

There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

Similar Messages

Maybe you are looking for