"There is a problem with this Windows Installer package. help pls!
Hello,
This is my first time using itunes! can someone help me please.
When i try to install the itunes, it prompted me a message that says
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
And i called up APPLE and they ask me to use the 6-steps uninstall mathod but i couldnt find any apple software update to uninstall so i ignore. and i tried downloading again and again but it stil doesnt works.
Can someone guide me how to install itunes?
Thank you so much
OK, so you don't have a working iTunes.
What I would like to do now is to try installing each iTunes component separately.
First uninstall the 5 iTunes programs that you have installed.
You should have iTunesSetup.exe saved in a folder on your PC, probably in the downloads folder. If not download and save it now.
Open the folder containing iTunessetup.exe with explorer.
Next open notepad and copy the following 3 lines into it.
md temp
itunessetup /extract temp
pause
Save the file as extract.bat into the same folder that contains the itunes installer.
Open the downloads folder and you should find the extract file that you saved. Double click on it and a black window will open telling you what it is doing. When its finished, press any key to continue.
You should find that a folder called temp has been created containing all the itunes msi files.
Install in this order by double clicking on them:
Apple Application Support
Bonjour
Apple Mobile Device Support
Apple Software Update
Quicktime
iTunes
If one of the installs fails, stop and post the error message in full. I am hoping that by doing this separately we will get a better error message.
Similar Messages
-
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."
Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that. -
I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....
-
when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR, -
When Upgrading on my laptop from iTunes 10.2.11 to 10.5.0 the message I get is: "There is a problem with this Windows Installer Package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or pacakge vendor.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
This is how it all started. When the new update for iTunes 11 came out, I tried to update it. After I had updated it I found nothing had changed. So i tried rebooting my computer and everything and found that still nothing had changed. So I tried uninstalling it. After that I tried to re-install it, but it came up with the
"There is a problem with this Windows Installer package ..." message. So I looked around the internet and found a website that told me to uninstall all Apple products. So i did that. When i tried to uninstall Apple Software Update, it came up with the 'problem with windows' message again. So I used Revo to uninstall it. So I rebooted and tried to install it again. It installed Bonjour and all of the other programs but stopped halfway and gave me the 'proplem with windows' message again. I've looked around and most of the solutions have been to try and repair Apple Software Update, but the problem is, I've already deleted it. So can someone PLEASSEEEE help me fix this problem! (Sorry for droning on)http://support.microsoft.com/mats/Program_Install_and_Uninstall try this an see if it fixes it.
-
Not able to access Itunes store anymore. Just quit working for no reason. I've tried deleting Itunes and related components from the Control Panel, but when I try to remove Apple Software Update, I get a message that states "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". Not sure what this message means. Am I suppose to contact Apple ? What is meant by package vendor ?
Apparently it's an itunes issue. I just tried to update and got the same issue. Called att to activate my iphone 4s and they say they can do the swap but apple is telling them itunes is down atm. So will have to wait
-
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!
I am experiencing the exact same issue during the installtion process for iTunes 10.5.
I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP! -
when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.
Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem. -
I am trying to update my iPhone software but to do so I needed to update iTunes. When I try to do that, I keep getting this error message" "There is a problem with this Windows Installer Package. A program required for this install to complete could not....
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit*** -
I am unable to install itunes 10,5. I receive this message: There is a problem with this window installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor. I am using window 7 ultimate 64 bits
There is a problem with the Window installer package. A program required for this intall to complete could not be run. Contact your support personnel or package venfor.
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?
Maybe you are looking for
-
Create single-roles in satellite-system
Hello everybody, I want to create Single-role´s in a satellite-system over RFC but the Fm´s in the Functiongroup PRGN are not remotable. Is there an alternative way to create these single-roles in a satellite-system? Up-/download and transport functi
-
How to integrate different database in SAP B1 into unique DB?
Hello, In our landscape, we've SAP B1 System and we also build SAP BW on Hana reports using B1 as a source system. Currently, in SAP B1 system, we don't have unique database. Rather, we have distinct database for different Sales Offices. At present
-
What is the best way to run a powershell script with parameters in the Task Scheduler?
Hello, Want to run the following from a scheduled task in the Task Scheduler on a server. What is the best approach? .\pscript.ps1 -csvfile "\\Srv1\Share\File.txt" Thanks for your help! SdeDot
-
Reg: material reconcilation o/p error
Dear experts, Here am generated a report for material reconcilation. For that am getting error in my o/p. open rm qty and closing rm qty, here open rm qty is 2,500 and closing rm qty is 2436. for one lot no it displays 5 service invoice, job work i
-
How to interface instruments through TCP/IP port
I want to connect an instrument ( which has RS-232 port ) to a Computer Ethernet port through an Ethernet to RS-232/485 Converter. In past I had successfully made many GUI with Java-2 swing to interface instruments via serial ports (COM-1, COM-2 etc.