There is a screen with an apple sign that has been frozen all night long. What do I do?
There is a screen with an apple sign on my ipod touch that has been frozen all night long. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My laptop won't turn on. It's been hours and all it's showing is a white screen with the apple sign and the loading circle. I've tried turning it on and off, nothing's working. Please help!
Will it boot up in safe mode?
http://support.apple.com/kb/ph11212
or can you enter single-user mode?
https://support.apple.com/kb/ht1492
What version of OSX are you running? -
In he middle fo a restore i got a message re the battery and i am unable to get mu i phone back on as i have a dark screen with the apple sign on it I am unable to turn off or charge Help!!!
http://support.apple.com/kb/HT1808
-
I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.
First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2 -
I Just bought Adobe story but when I press sign in there appears an ST logo with a spinning @bar that has been on my screen for hours
Can you please try the following?
- first make sure that you have flash player up-to-date. You can get the latest version from https://get.adobe.com/flashplayer
Now log into story wait for some time to see if this resolves your issue or not
- If it doesn't then try opening private browsing/incognito mode of your browser and try logging into Story from there
If you are able to login then you should try clearing cache and cookies of your browser -
on start up i just get a grey screen with the apple logo-this has suddenly started happenin. Please help?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
Iphone 6 is stuck on apple screen with loading bar. It has been like for 12 hours.
My Iphone 6 is stuck on the opening apple screen with loading bar. It has been like this for 12 hours. I've tried resetting it by pressing the home and power button together but it keeps coming back to the same screen. What should I do?
I've had the same problem but it's tuck on like the very last little bit and hasn't gone anywhere in 10-15 hours.
-
Is there a way to retrieve a text message that has been deleted from my iphone?
Is there a way to retrieve a text message that has been deleted from my iphone? I did't delete the message but after i synced my phone the message was gone.
No, the app doesn't use Safari. The app is AutoDesk Inventor Publisher Viewer. I think there is a way that you can have a publish Inventor file, and if you create a correctly formatted hyperlink, you can click on it and it will immediately open the file in the viewer.
I know that if you offer the file as a standard download, iOS will ask whether you want to open it with Inventor Pub. Viewer or save it to another app that can accept files. I would prefer to skip the prompt, and just open the viewer.
I've heard mention that this can be done with this application, but I can't find reference material anywhere. -
HT204053 How can I remove an apple id that has been disable from I cloud?
How can I remove apple id that has been disable fro my iCloud ?
You cannot delete an Apple ID. All you can do is stop using it.
-
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.
See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I purchased an iPhone 4s few weeks ago here in Pakistan and now I can't activate it because it says the this iPhone was lost and erased. Sign is with the Apple ID that was used to erase this iPhone. What do I do now? because I contacted the Owner but he's not willing to give me that ID. I mean it's really very annoying why do people are selling stolen phones? Please help me guys.
If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
-
Okay so when I had a ipod touch 4 with ios 6 my apple id got hacked and they spent all my itunes credit bla blah blah. so i made a new apple id which was fine and was working. i recently upgraded to an ipod 5 so did my sister and i got ios 7and she just kept ios 6 then my ipod camera crapped out so i decided to back up my ipod first and switch with my litttle sister by erasing and restoring both of them. I erased my little sisters one and restored it to mine but it said to do that it needed to upgrade to io7 so i let it do its thing and then my ipod camera started working again (i hadnt erased mine) I then relised when i clicked back up to my ipod on my little sisters ipod i clicked the back up which was ages ago when i was using my ipod 4 and ios6 with my old apple id that i no longer use. now that i want to change her ipod back to her own one not with my old stuff on it. it is logged into the old apple id with the old email that we deleted and the old icloud account linked to the same old email account that is deleted. ------------------------------------------------------------------------------- ------------------------------------------------------------LONG STORY SHORT : I am trying to erase my sisters ipod so i can restore it back to normal but theres is an old apple id on it with an email account and icloud account that has been deleted. PLEASE HELP ME
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased. -
Help me, my ipod is freaking out! It has the apple screen with a white loading sign that never moves. After about 19-20 seconds it flicks to my lock screen but i can't do anything with my lock screen and then it flickers back to the apple sign... WHATS GOING ON?!?!?!?!
Try here.
iOS: Not responding or does not turn on
If necessary,let the battery fully drain and then charge and try again.
Maybe you are looking for
-
How to install Oracle Database Client 32-bit libraries.
Dear All, In the document : http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf it is written "For 64-bit Linux system installations, you must use the Oracle Database Client 32-bit libraries" how can i install just the libraries from
-
How to make Different Tracks in a Recording
HI there ... I'm just starting to make my way around GarageBand ... I have to do a recording tomorrow ... its an audition for a pianist. He's going to have to play some solos, scales etc ... all told it will be about an hour and a half of recording o
-
How to watch videos in Safari 6.1
OS X 10.8.5 I can't watch videos included on sites in Safari. All I see is a white space. Youtube works well.
-
Hi, I am using BPC 5.1 SP3 and I am trying to perform different calculations based on the time period. The user select one month to run the script (let's take 2008.JUL) and I have an *XDIM_MEMEBERSET command that expands the scope of the Time dimensi
-
Can i import unix executable files into iMovie?
I have old videos that were put on dvds using go-video. They are unix executable files, I don't know how to import them into imovie. Am I missing something?