There is a strange small gear like circle on the black screen of my ipod touch 3g
The ipod is unresponsive, is fully charged and this strange circle (looks like a little gear) is in the center of the screen, I've never seen this before and I don't know what to do to fix it, does any one know why it did this or how to fix it?
This is a problem. It has crashed. Try connecting to iTunes and restoring. If that doesn't work, contact Apple.
Good luck.
Similar Messages
-
I've tried plugging it..trying to turn it off...everything and nothing works...
Try a Reset, hold together Home and Power buttons for about 15 seconds until iPhone restarts.
-
So what can i do now then?
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Make sure that the phone is charged at least 10min before you connect. -
My computer has recently decided to reject my iPod Touch completely from it's system, it has also deleted all the data from my iTunes library. It claims that my iPod has been synced with another computer and states that they can only be associated with a single computer. I was wondering whether there was any way of which I can change the computer of which my iPod Touch was originally associated with? Is it possible? Your help would be greatly appreciated! Thanks
Your Device will only Sync to One iTunes at a time...
Syncing with iTunes
Transferring purchases from iOS or iPod to a computer
From Here http://www.apple.com/support/ipodtouch/syncing/ -
MY DOWNLOADED SONGS DONT PLAY AND THERE IS A LITTLE SMALL WHEEL IN FRONT OF THE SONG TITLES
MY DOWNLOADED SONGS DONT PLAY AND THERE IS A LITTLE SMALL WHEEL IN FRONT OF THE SONG TITLES
I'm in the same boat...so far no one has helped here
-
the touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?
Try # 2 and 3 in link below. If neither work, your screen digitizer might need to be replaced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpfulTry using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT -
There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..
It maybe trying to boot from the incomplete install.
Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X. -
I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
Camera works, with the side buttons it takes pictures.
Although I'm not able to see on the screen.
MikeFirst try a restore from backup
If problem still occurs try a restore to factory defaults/new Pod.
If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order. -
The screen on my ipod touch is frozen with the iTunes symbol and the connection cord. I don't know how to get past this. Has been like this for over a week. Need help PLEASE.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
IS there any way i can make something appear on the external
screen or use the camera or microphone?Hi. Sorry, but isn´t this something that has been around forever?
Regards
Lars @ søgemaskineoptimering -
Would like to use iMessages internationally, sending between an iPod touch and and iPhone. Does anyone know if it will work between countries?
The iPhone is not user servicable. You can get an out of warranty replacement from Apple for $149. If you open the phone yourself, you forfeit the ability to do this.
-
Why is there a speaker symbol on the screen of my ipod touch. how do i get rid of it?
why is there a speaker symbol on my screen of my ipod touch? how do i get it off?
Where on the scree does the icon appear? Does it appear on home screen? On apps? I just looked in the Users Guide and can see no speaker icon on the top part of of the screen.
-
my iphone 4s gave me the screen it gives while shuting off the black screen with the loading circle randomly idk why this happened...
i have also reset all of my settings but it did it again
-
I'm having trouble with my iPhone 4, but on the black screen with the I tune music circle with the charger below it. I just don't get it after I plugged to the computer and it's not working :.(
The screen is telling you to connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
BTW, this is the iPod touch forum
Maybe you are looking for
-
My ipod has been working fine and today I pluged in my ipod to upload some more songs and this poped up and It deleted everything on my ipod i don't know what this means or why it even poped up . Songs on the iPod"Kevin W Mills's iPod" Cannot be sync
-
In process order confirmation screen there should be 2 rows for down time.
hi, We are using cor6n for process order confirmation, where we can put down time with confirmation text at once, if there is two different down time, then user has to again run cor6n with 0 yield for put another down time, which gets more time. f
-
Is there a way to mirror my ipad screen to my macbook pro with just an old fashioned cable? This may sound crazy, but I need to project ipad applications for demonstrations, and I need to be able to do this on corporate networks that don't support mu
-
How do I change the fixed song length in iTunes?
I have a song that's 6:50 in length, but iTunes reports it as 5:42. It plays the whole song OK, but freezes the progress bar at the 5:42 mark with "time remaining: 0:00" displayed on the screen for the final 1:08. Also, no matter how many times I lis
-
JCO_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 02667299
Hi Experts, I am having some issue with PO and ECC connectivity with data load from PO to ECC system via RFC connection RFC is configured in PO , SOA -> Technical Configuration -> System Connections -> Provider Systems -> Connectivity as below from