'There is an inactive version of object nnnnnnnnn'
I have been tasked with rectifying a transport that someone has foolishly created and contains 40+ OSS notes. I don't know the history of what's happened to this transport, other than it will not release due to inactive versions of objects. I have gone through all 600 objects and activated them were applicable. However, there are a few which say 'There is an inactive version of object nnnnnnnn' when I attempt to activate them. How can get them activated?.
Jason
Many thanks, I did not have an issue identify the inactive objects, the transport release process did that,. The problem that I had was in actually activation them. If I clicked on the object and was taken into SE80 I then displayed the inactive objects and then activated them, but the same message was shown saying that there was an inactive version of the object.
My colleague has this morning managed to activate them, so I assume that this problem may have been caused by the fact that service patches were being applied at the time so maybe some locking was going on.
Anyway, thanks to alll, and that particular problem was overcome, but we now have another problem to deal with in the same transport as someone has applied notes via snotes without completing all the pre-implementation and post implementation instructions, and this is for a number of notes. Doh, why is my life always made harder by other people.
Jas
Similar Messages
-
Calling inactive version of ABAP object from Java
Hello,
When I call an ABAP object from Java Program which version of ABAP object is called inactive or active ?
Is there a mechanism to call the current inactive version or any other previous inactive /active versions ?
Regards,
TarunOnly the "active" version of ABAP code is active and runnable.
You cannot run inactive versions. Like you have to compile a .java file to a .class file o make it runnable in the JVM. -
New version of object popping up on Deletion of T Code
Hi
I removed a Tcode from a role. This Tcode does not have any other object besides S_TCODE. However on exclusion and choosing Expert Option / Read old status and merge with new data, i see that there is a new version of a object has popped up in "NEW". The older version of that object is in the Changed mode.
From this I understand that if a standard object is changed then every time "Read old status and merge with new data" is chosen SU24 is re-read to pull out the standard object... Am i correct here?
If the above is true then as a standard practice is it right to may inactivate the standard object and manually add that object again or copy that object to bring in a new version of that object.... -
is this right?
Please advice
- raviHi Ravi,
When ever you add a new tcode to a role, make sure you add the tcode in the menu of the role so that the role will pull all the authorization objects check/maintained against the tcode.
When you delete a tcode then it will automatically deletes the authorization objects associated with the tcode.
If you do a merge with new authorization data, then the role will get the new authorization objects if newly check/maintained for any tcodes from SU24.
The best practice is to always have standard/maintained authorizations for the authorization objects in the role. Manual additions of authorization objects is not advisable unless if the business requires so.
Please reward points.
Regards,
Kiran. -
Re Importing Previous versions of Object / Namespaces in Integration Rep
Hi I have the following scenario.
I have exported my namespace as a tpz file from the XI Dev system. And then I make some changes to some objects in the same namespace . But I want the previous version (previously exported tpz file ) back . So when I try to import the previous tpz file back into the integration repository , I am able to do this activity sucessfully but no changes of the previous version are applied . The current version is still present in the namespace .
And a strange thing is happening . The 2 Object Attributes in the Display Software Components Version Page "Objects are orignal Objects" and "Objects are modifiable" are unchecked now for the SWCV .
But when I exported the previous version they were checked. I am not sure what is happening . Can any one please suggest .
thanks
regards
NileshHi,
*You want to get back to the previous version.
If you have exported the very first verion creating a .tpz file then follow these few steps :
first export the current namespce.
Delete the current Namespce.
Import the previous version or the very first version of the namespace which you ,, you can trace it by the date&time stamp patched to it.
Activate the new namespace.
*the object are checked as because of the security reason.
there is absolutely no problem in that, these are unchecked so that no one will be able to edit it manually with the proper transport which you can see in production/ quality environment.
Hope this will help.
Assign point if help
Thanks,
JAY -
Dear Experts,
When i am trying to create plan, suspose system will prompt a small box and key in version number and description for inactive version. After that , only transfer to demand management as active version.
But , now system does not prompt a box and straight away use A00 and it is an active version.
Is there anyone face this problem and might to share what is the configuration i might miss out?
Thank you.Hi Bodgan,
Please refer the Step.For SOP through LTP
For SOP
1.Create Plan in flexible planning MC93
2.Sales plan verification transfer to active version MC8V
3.Transfer sales plan to production plan MC8Q
For LTP
1.Create Inactive Demand Management MD61
2.Copy SOP Production plan to Long term planning MS64
3.LTP Planning Scenario MS31
4.LTP MRP MS01
If still not clear i will send you the document regarding what you required.
Thanks,
Mohit -
Hi,
In which table versions of object type TOBJ will be stored.
In table vrsd it is not stored.
Thanks in advanceHi Krithiga,
In many times a sap object don´t have any version.
If you go to the table TOBJ and press Utilities -> Versions -> Versions Management it´s posible that appear a unique version and the next text:
There are no versions in the version database.
For this reason aren´t any entry on VRSD table.
Best Regards. -
More inactive versions of one program
Hello,
is it possible to have more inactive versions of one program/dictionary object? How to save them and work with them?
Example: I develop something and do not know which solution is the best. I consider 2 solutions and need to do some test for comparison. I have solved it with a new programm with a different name till now.
Thanks for your hints,
RadekHi
The system can create a version of abap object only if it's assigned to package, i.e. it's not a local object.
The system inserts the object in a change request as soon as it'll be changed.
The version will be created as soon as the request is released.
So only one version can be used, if it needs a old one it has to restore it.
Max -
Inactive version to active version
Hi Gurus.
In this scenario I want to convert the PIR's that I am getting from APO in inactive version and I want to convert it into active version before running the MRP.Pls suggest how to do it?Hello Dardo,
Mostly you can do planning with different version numbers in planned independent requirent.Unless and until you active the version, it will not transfer the independent reqmt to stock requirement list.
To active any version number, go to change mode (T.C MD62) and give the material number, plant and version number which you want to activate and press enter, it will go to next screen.There besides material name field there is check box for version.Just tick that.Now if you see in stock reqmt list (T.C MD04) you will see the indep reqmt got transfered.
Hope this way you will resolve your problem. -
when I try to open seeded VO.xml from Jdeveloper it is giving below error. Can any one please help me out.
Warning: There are Java errors for this object. The wizard will be read only until they are corrected.
R12 version 12.1.3
Jdev patchp9879989_R12_GENERIC.zip
Thanks
Venkata .THi Venkata,
Same thing happening to me, R12.1.3. Please let me know if you find anything on this.
I tried some steps in this forums related to this, but no change. however I am not worried, customization works perfect after extension, but wanted to know the reason.
Thx.. -
I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again -
Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?
Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?
-
Is there any way to disable the objects owned by a user?
Hai every body....My problem is..
I had created 60 users granting them connect and resource privileges in oracle(8.1.5.0.0).All of the users are working under their logins(users)...Every thing is going fine...But now i wanted to disable the objects owned by those users
(60 Users) for a period of 2 days,After that i wanted to enable them....Is there any way to disable the objects owned by them with out dropping the users?(The users should be able to work as prevoiusly on the new objects they will create after i disabled the objetcts owned by them previously)?hi
if my understanding is right you want to disable the users for 2 days for any reason let say he is on holiday for 2 days then why dont u lock this user and submit the job for unlock after two days.
Khurram Siddiqui
[email protected] -
I've down loaded the new version according to Creative Cloud but when I try to launch the app the window appears saying there is a new version, so I click on download now and it crashes. What's happening and what should I do? Thanks.
Thank you so much. I finally got it to work. I don't know why it has to be such an ordeal when it comes to Adobe products!
Todd
Todd McVey
Art Direction
201-723-0104
[email protected]
www.toddmcvey.com
@mctwitthis -
Is there a way to use bpm object in jsp (java)
hello
i could see that the bpm object can be used in jsp with javascript and fuego tag. but is there a way to use bpm object with java code?
thank you!Suppose a Servlet/JSP calls java classes. In the java
functions of those classes, is there a way to get and
set attributes with application/session scope
directly? Thanks.Only by passing a reference to those classes (or by tying in to the framework/container). -
Is there a way to add new objects to object changeability list?
My production system is locked and I need to change object type RSFO (formula). I looked at the object changeability list and it does not contain RSFO. Is there a way to add this object to this list so I can change it directly in production? Thanks.
hi,
I hope you can create similar formula in the production. as in the production we can change the reports,proces chain,aggregates, infopackages.
Ramesh
Maybe you are looking for
-
The wireless radio is not functioning on the Photosmart Premium c309a all in one printer
The wireless radio is not functioning on my Photosmart Premium C309A
-
Error While validating OAGIS Document
Hi All, My requirement is that i need to send a OAGIS 9.0 file from the Host Trading partner to the Remote trading partner. So, i have defined the OAGIS document in the Custom Document protocol over Generic Busines Protocol.I does not get any error w
-
Error occurred while solution import in crm 2013
Hi, I have unmanaged solution now I am importing solution in another organization there is some error occurred while importing solution in crm 2013. Please tell me how to solve this issue
-
Text messages are not making sounds anymore.
I have the sound on and when I send and receive text messages, I do not hear the alert. I also do not hear the keystrokes. Speaker phone works when I get a call but I can't hear texts or keystrokes, or the keypad when I am placing a call. When I plug
-
IPhoto crashes (hangs) soon after opening after updating
I updated my iPhoto 09 this morning and on re-opening iPhoto after the update it hung after about 10-15 seconds with the spinning wheel of death. I have rebooted the system and removed all 3rd party plugins to no effect. I have about 12,000 photos. I