There is any way to speed up the shipment Dispatched?! I had been order it in the first of Oct. and the planing for shipment time announce to be between  3 to 4 Weeks Delivers  24 Oct, 2012 - 30 Oct, 2012

There is any way to speed up the shipment Dispatched?! I had placing in order in the first of Oct. and the planing for shipment time announce to be between  3 to 4 Weeks Delivers  24 Oct, 2012 - 30 Oct, 2012

No

Similar Messages

  • Is there any way to set up an Airport Extreme that had been previously used in a password protected network and the password was not provided by the seller ?

    Background -
    My original Airport Extreme Base Station failed (would not connect to the modem). I purchased a similar, if not identical base station on eBay. Unfortunately, the purchased base station apparently was used in a password protected network. For what it is worth, my son gave me a Netgear wireless router, but it leaves a lot to be desired. For one thing, I use to keep the cable modem in the basement along with the Airport base station, with a printer connected to the USB port. The Netgear device does not have a USB port and also requires that the computer (in this case, the eMac) used to set up the network be connected to one of the ethernet ports. This meant I had to move the cable modem and router into my bedroom, a very undesirable situation. It then occurred to me that the original Airport base station Wi-Fi function might still work, and tested this hypothesis and sure enough, the Wi-Fi function does indeed work I currently have both base stations powered on, with my printer connected to the original. Both base stations appear under my Network icon, but neither Airport Utility 5.4.2 or Airport Administrator Utility 4.2 see either base station. I can select the original base station as my network, connect to the printer or even my other computers, but as soon as I try to select the new one, it asks for the password. I would like to somehow reset this base station and then redefine the network name and encryption.

    I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

  • Is there any way to speed up the chipscope?

    Hello
    I have made a design to test an ADC. The timing report shows that it can runs at 200MHz. But after I added a chipscope part, the frequency became much lower.
    Reduce the width and deepth of the chipscope would make it run faster, but I still want to know if there is any way else to make it faster.
    Thanks for your help
    Wan

    
    The negative slack is in ila:
    From:
    U_ila/inst/ila_core_inst/xsdb_memory_read_inst/multiple_read_latency.read_enable_out_reg[3]/C
    To: U_ila/inst/ila_core_inst/ila_trace_memory_inst/SUBCORE_RAM_BLK_MEM_1.trace_block_memory/inst_blk_mem_gen/gnativebmg.native_blk_mem_gen/valid.cstr/ramloop[226].ram.r/
    I'm using 156MHz clock to ila.
      U_vio: cse_vio
      PORT MAP (
            CLK         => s_clk156_out,
            PROBE_OUT0  => vio_async_out,
            PROBE_IN0   => r_vio_async_in
      U_ila: cse_ila
      PORT MAP (
            CLK          => s_clk156_out,
            TRIG_IN      => r_ila_trig_in,
            TRIG_IN_ACK  => o_ila_trig_in_ack,
            TRIG_OUT     => o_ila_trig_out,
            TRIG_OUT_ACK => r_ila_trig_out_ack,
            PROBE0       => r_ila_data
      vio_async_in          <= "0000"  & s_trig3 & s_trig2 & s_trig1 & s_trig0;
      s_tp_mux_sel          <= vio_async_out(1 DOWNTO 0);
      s_trig_mux_sel        <= vio_async_out(3 DOWNTO 2);
      ila_data              <= s_tp0   WHEN (r_tp_mux_sel   = "00") ELSE
                               s_tp1   WHEN (r_tp_mux_sel   = "01") ELSE
                               s_tp2   WHEN (r_tp_mux_sel   = "10") ELSE
                               s_tp3   WHEN (r_tp_mux_sel   = "11") ELSE s_tp0;
      i_ila_trig_in         <= s_trig0 WHEN (r_trig_mux_sel = "00") ELSE
                               s_trig1 WHEN (r_trig_mux_sel = "01") ELSE
                               s_trig2 WHEN (r_trig_mux_sel = "10") ELSE
                               s_trig3 WHEN (r_trig_mux_sel = "11") ELSE s_trig0;
      i_ila_trig_out_ack    <= s_trig0 WHEN (r_trig_mux_sel = "00") ELSE
                               s_trig1 WHEN (r_trig_mux_sel = "01") ELSE
                               s_trig2 WHEN (r_trig_mux_sel = "10") ELSE
                               s_trig3 WHEN (r_trig_mux_sel = "11") ELSE s_trig0;
      process(s_clk156_out)
      begin
       if(rising_edge(s_clk156_out)) then
        r_vio_async_in0     <= vio_async_in;
        r_vio_async_in      <= r_vio_async_in0;
        r_ila_trig_in0      <= i_ila_trig_in;
        r_ila_trig_in       <= r_ila_trig_in0;
        r_ila_trig_out_ack0 <= i_ila_trig_out_ack;
        r_ila_trig_out_ack  <= r_ila_trig_out_ack0;
        r_tp_mux_sel0       <= s_tp_mux_sel;
        r_tp_mux_sel        <= r_tp_mux_sel0;
        r_trig_mux_sel0     <= s_trig_mux_sel;
        r_trig_mux_sel      <= r_trig_mux_sel0;
        r_ila_data0  <= ila_data;
        r_ila_data   <= r_ila_data0;
       end if;
      end process;
    Thanks, Wen

  • Any way to speed up the "faces" process?

    I used to use picasa and their faces system was very efficient. You could approve hundreds at a time. Is there any way to speed it up in iPhoto? I have about 10,000 photos, and it only seems to show 3 faces at a time.
    iPhoto 11

    No, that does not sound right at all.  ( 5 is a lot of movies to cart around on your pad.....)
    Hopefully you are doing this on your home wifi set up, and trying to use cell, or Starbucks.
    Is your home system normally that slow? 
    You can test your system speed by download one of many speed apps available like 'speed test'. And if you are any sort of decent service, you should get a speed of at least 2 mbps, and potentially as hig as 20 Mbps . 
    If your connection is fine, then something else is going on.  Suggest you cancel the download, and try again.  It may be you are getting hung up at the server end.
    If your connection, however, is real slow, there is nothing you can do about it except to find a faster wifi spot.  ( the speed test app will let you test)

  • Any way to speed up the toolbar?

    I like working in fullscreen, but the timing on the toolbar dropdown is sloooowwww... Any way to speed it up?

    No, that does not sound right at all.  ( 5 is a lot of movies to cart around on your pad.....)
    Hopefully you are doing this on your home wifi set up, and trying to use cell, or Starbucks.
    Is your home system normally that slow? 
    You can test your system speed by download one of many speed apps available like 'speed test'. And if you are any sort of decent service, you should get a speed of at least 2 mbps, and potentially as hig as 20 Mbps . 
    If your connection is fine, then something else is going on.  Suggest you cancel the download, and try again.  It may be you are getting hung up at the server end.
    If your connection, however, is real slow, there is nothing you can do about it except to find a faster wifi spot.  ( the speed test app will let you test)

  • Is there any way to turn off the ability for my kids to make purchases on their ipods

    Is there any way to turn off the purchase ability on an ipod?

    Yes.  You can set restrictions.
    iPod touch User Guide (For iOS 6.1 Software)

  • Is there a way to speed up the "Java Loading" screen time?

    Hi.
    I'm having a big problem with that. I'm running the JRE 1.6u3 on Windows XP SP 2, on an AMD Athlon 64 X2 Dual 3800+ (2GB of RAM), and the "Java Loading" screen time of web started apps is too high (about 15 seconds when I just restarted the pc, and 10 seconds after the first load... is that right?).
    What Web Start do when it is "loading" ? The loading time of a standard client VM is pretty faster (like, uh, 1/4 second?).
    Thanks.
    Hidralisk

    The Java Loading splash is only shown untill the Main class of java web start is invoked and can put up the download progress dialog. I don't know why it would be so sow, but this should be improved by the Java Quick Start featurew put in jdk 6u10 (see http://download.java.net/jdk6/)
    the bug 6506138 has been escallated and is being vigorously investigated. (it would probably pertain more to the time durring which the download progress window is shown or beyond)
    /Andy

  • HT4098 is there any way you can cancel the subscription for eHarmony

    please dispite or cancel the subscription for eHarmony it was accident iam not paying 239 for that application please CANCEL!!!

    Contact iTunes support:
    http://www.apple.com/support/itunes/

  • Is there any way to speed up the printing from my Mac to my HP LaserJet?

    I just bought an HP LaserJet Pro 400 M451dn and it works wonderfully and prints amazing quality but the only problem is it takes a VERY long time for my MacBook Pro to send the data to the printer. It's suppose to be up to 21ppm but I was literally getting 2ppm. Granted it was a rather detailed page I was printing, but 2ppm is still way to slow. Used the generic PCL driver printed way faster but only printed in Black and White.
    Specifics
    Mac OS X 10.7.5
    HP LaserJet Pro 400 M541dn
    USB connected (about 12 feet)
    Downloaded lastest driver and firmware from HP's website
    Tried generic PCL driver, prints waaaaaay faster but only in Black & White.
    I download something called GutenPrint but I have no idea how to install. If thats a good option and someone has instructions I would greatly apreciate it.
    I'm not a tech wiz, but I consider myself good with computers.
    Thanks in advance!

    Gutenprint drivers are intended for non-laser printers. HP supplies the proper drivers, and you can download the latest version directly from HP's support site. Or you can install the most recent HP drivers provided by Apple.
    Printing speeds do not include the time it may take to transfer data to the printer. It also doesn't take into account the time it takes for the printer to be prepared to start printing. Color is much slower than B/W.
    Contact HP for any additional assistance you may need since these forums do not provide support for non-Apple products.

  • Is there any way to speed up the task sequence media wizard?

    Hi. I'm running SCCM 2007 R2. We mostly deploy our OS builds with USB keys. Our image is approx 7GB so it was taking a long time every time we wanted to create a new key (approx 2 hours). After looking online the solution seemed to be to visit a machine
    with a DP and plug in the key directly.
    I have the SCCM console on my local PC (Win7 Ultimate) and I've installer a DP on my PC. After some initial problems I got all the packages to update the DP and all looks OK. However I'm running the first key build now and it's been going for over 2 hours.
    I can see files been written to the key in windows explorer and the CreateTsMedia.log isn't showing any errors. It's just really slow. Have i missed a step? Is it like this the first time you use a DP?
    thanks

    Yes, I know this is an old post, but I’m trying to clean them up.
    Are you building the USB key locally to CM12 or remotely?  I have always found that building the USB key locally on CM07 site server to be the fastest way to do this.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • COBRAS - any way to speed things up?

    I'm working on a customer system and will be using COBRAS to migrate user data this weekend.  There are three systems involved, the largest of which has some 8900 subscribers on it.  Running the backup of the system using COBRAS took 1 hour and 50 minutes.
    Currently running a test import to see how long things will take, and I'm at 14 hours now and it's still cranking.  The display is showing me import stage [10 of 20] Subscriber Modification and Current Object [83.3% Complete]
    Trying to figure out if there is any way to speed this up.  For instance:
    1.  If the COBRAS workstation is layer 2 adjacent to the UCxN publisher, is this preferred, does it tend to work faster?
    2.  Would this run faster if I did a bulk creation of the mailboxes first and then use COBRAS to update/fine tune them?
    3.  During user creation, I was watching and it seemed to create anywhere from 6 to 12 users, and then just stop for around 30 seconds give or take.  The logs don't show any reason for this, but with the number of times it happened, it's having a significant impact. 
    I'm running the most recent builds of export/import (downloaded them yesterday). 
    Any recommendations, thoughts, observations, etc. appreciated.
    TIA
    Cliff

    I don't use Creator 2 so I can't comment personally, but these links might be useful:
    http://blogs.sun.com/theaquarium/entry/big_speed_improvements_for_creator
    http://blogs.sun.com/tor/entry/creator_on_speed_serious_speed

  • I recently bought an iPhone 5s from boost mobile I thought service would be decent but it really *****. I'm wondering if there is any way I can switch carriers maybe to us cellular seeing that they recently added new prepaid plans

    I recently bought an iPhone 5s from boost mobile I thought service would be decent but it really *****. I'm wondering if there is any way I can switch carriers maybe to us cellular seeing that they recently added new prepaid plans and have good service in my area.  I do know boost operates with sprint but  not sure what I can do because having an expensive phone with crappy service really *****

    Sorry, but Boost reportedly does not offer unlocking for iPhones, so you're stuck with them unless you can return the iPhone for a refund and cancel the service, or can sell the iPhone to someone who could use it with Boost.
    Regards.

  • I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

    I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

    So you bought a plan and used it all and want another one for free? I understand you thought it had more texts or whatnot but they won't do that since you already used the other plan.
    That's like going to McDonalds and ordering a double cheeseburger, them giving you a double cheeseburger, you eating it and then realizing you wanted a double quarter pounder and expecting them to give it to you free.

  • In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

    In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
    Thanks

    Hi,
    I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
    Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
    As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Is there a way to speed up the response time from the dock

    Is there a way to speed up the response time for external hard drives from the dock? I have three external HDs but when I click on the alias in the dock there is always hesitation before it opens. I'm leaning towards the fact that it is just a result of the fact that the speed of the Mac is what it is. But, maybe there is something I can do to speed it up. The drives are plugged via usb directly to the Mac and they have there own power source. The curious thing is that they once were plugged into a large separately powered USB hub and I don't recall a lag like I have now. Any thoughts? Thanks...
    Message was edited by: gfann18

    Have you got the drives set up to spin down when not in use?
    Have a look at the Energy Saver settings in System Preference on the Mac.
    Make sure the "Put the Hard Discs to sleep when possible" box is not ticked.

Maybe you are looking for