There is insufficant bandwidth to maintain the confrence...??

Hi all,
I'm a noobie to Macs and am getting the error -
"There is insufficant bandwidth to maintain the confrence...??"
I'm gussing I dont have a big enough bandwidth...! Ok cool But, what sort of bandwidth do I need??
I am currently running on a ADSL 256k/64k connection. Is this fast enough?? or am I doing something wrong?
I cant even start a confrence...:(
G
iMac intel, 2G memory Mac OS X (10.4.4)
iMac intel, 2G memory Mac OS X (10.4.4)

Hi Graham,
There answer is not that straight forward.
The quotes Minimum for iChat is 100kbps Up and Down.
The absolute Min is 50kbps throughput in real time before the Error message appaears.
Testing your connection speed may confirm that you are getting about 80% of the quoted figure (about 51kbps). iChat will use about 80% of what is left (about 40kbps).
So you are going to need an Uplink of at least 256Kbps (based on the next step down is likely to be 128).
I know that this can be difficult to get is Australia.
Some people in OZ do manage with a 128k upload.
1:30 PM Thursday; February 23, 2006

Similar Messages

There isn't enough bandwidth to maintain the chat (brand new iMac)

When trying to do a video link with another Mac user over AIM I often get the "There isn't enough bandwidth to maintain the chat" message." Both of us are on broadband. A few times I got a connection but it was all pixalated. IM text works fine. Video... not at all.
This iMac is only 2 days old and so far everything is great. I DID migrate from Tiger on a Mini so maybe I got some old system file somewhere?
All help is appreciated.

HI,
Aim and iChat Video are compatible.
iChat can potentially send a pic of 640 X 480 pixels (0.3Mp) at 30 Frames a sec.
That's the same as trying to send a 10Mp pic every second.
(As a rough guide, a .jpg of twice the dimensions is about 500kb = about 250kb for the same size = 75kbps
Or a 22sec movie I have is rated at 135kbps)
The quality of Skype is a lot less than this which is why it tends to work but still be jerky as the Satellite end is at it's limit.
Yes, Skype uses a different Video protocol to that used by iChat and AIM (or even MSN or Yahoo or GoogleTalk)
7:24 PM Wednesday; November 11, 2009

"There is insuffcient bandwidth to maitain the conference".

Trying to connect from hotel room, via wireless, when I try to connect either with voice or video I get the message "There is insuffcient bandwidth to maitain the conference". Works fine at home able to connect via voice and video with no problems.
Any thoughts.
Thanks,
Felix

Alex,
We are having the exact same issues within our corporate WAN.
Apple has some suggestions: http://docs.info.apple.com/article.html?artnum=301641
This article is a little more thorough and if you scroll about half-way down the page youll see another possible reason you are encountering the error.
http://www.mvldesign.com/videoconference_tutorial.html?_

Not enough bandwidth to maintain connection

Okay here is my problem- I'm a college student living in an off campus type of dorm sharing an internet connection with many other people. My sister and I have tried to have video chat's using ichat. We both have macbooks however it seems like each time we try it says there is not enough bandwidth to maintain the connection. This applies to audio chats too. We also have our setting to bandwidth limit as being none. The next thing I am curious about is that on ichat certain people have three layers representing their video and audio chat capabilities. I know I should have three layers since I have all those capabilities but I don't. Any help would be sincerely appreciated.
Ally

nosylla2931
Because the total bandwidth is being shared among lots of people, your connection speed is likely to suffer, especially at peak periods. Have you tried at different times of the day to see if there's any improvement?
You could check the QuickTime streaming speed:
System preferences>QuickTime>Streaming
If it's set to Automatic, change it to 1.5 Mbps.
Also, set the iChat bandwidth limit to 'none' (iChat> Preferences> video).
If that fails, try the video version of Skype instead:
http://www.skype.com/download/skype/macosx/videopreview.html
Let us know if this doesn't get you chatting and we'll try some more things.
Dave

How to maintain the Alert History by using OWN Tables

Hi,
In BAM defalut alert "History" table having limited number of columns.
But i want to maintain more informations about alerts so is there any other way to maintain the by using OWN alert history Table.
Thanks and Regards,
kash

No you cannot maintain your own history tble.
The only columns available are the ones displayed in the alert history data object.
Apart from this no other information will be available.
Alternatively you can create another Data object and create a look up field pointing towards the alert history label based on a particular key.
If the key matches then the data from the alert history DO will be pulled into this DO.
To this DO you can add your own columns and populate them with your own data.

Is there any config file to maintain/change the frequncy for polling adapte

Hi,
I am aware that in unix there is a way to schedule any job using several utilities like crontab.
Similar to it is there any way to maintain the frequency of the polling adapters ( database or file )
We should be able to change the frequency of polling ?
Regards

Hi ,
I agree that we have option to set the frequency for polling adapters (DB/file), please allow me to explain the question
Option to set frequncy is available at the time of development and is fixed (hardcoded) in BPEL.
In a scneario where we have 100 such polling adapters , if I need to change frequency for say 10 of them .
is there any way to change the frequency without redeploying the BPEL.
Regards

Re:In MIGO transaction is there any place where we can maintain the message

Hi All,
In MIGO transaction is there any place where we can maintain the message.
Thanks
siva

Hi,
you need to go to MB02 and double click on the line item say the quantity, then you get the messages icon, click here to maintain the messages.
Or you can automatically set this by MN21.
Thanks & Regards,
Kiran

Any validity period or expire of maintain the skip indicator is there

Hi
Any validity period or expire of maintain the skip indicator is there.
Because we mantianed the skip lot for the materials. and it create the correctly upto some period and now eventhou we maintained in the insp type . it not show the X mark against the skip lot field for this lot for the materials.
Thanks
vraj

Hi,
What is the status of the lot lots
UD ICCO SPCO STUP
and let me know what is the DRM setting you have
u mean DMR.
DMR is LOT . dynamic modification -at lot creation
stage 10::
inspection severity : blank
skip : tick
ist: tick
short text: skip
No. of skips........ 9
Max. skip duration:blank
New insp. stage 20
Rejections 1
New insp. stage 30
stage20 :
inspection severity : 4 say
skip : blank
ist: blank
short text: inspect
No. of inspections.. 1
New insp. stage 10
Rejections 1
New insp. stage 30
stage30 :
inspection severity : 4 say
skip : blank
ist: blank
short text: inspect
No. of inspections.. 5
New insp. stage 10
Rejections 1
New insp. stage 30

Is there a way to maintain the zoomed in look as my final picture?

is there a way to maintain the zoomed in look as my final picture when I'm editing in
Iphoto?

I have no idea what you are thinking but zooming lets you view a portion of a photo closer. Cropping let's you're move part of a photo leaving only the uncropped portion if you could save (which you can not do in iPhoto) that is exactly what you would get and exactly what would be phased to any other program for further editing
cropping is the only way
LN

There are no message servers maintained in the associated SLD Error/Problem

Hi Experts,
I developed a Web Dynpro in my Composition Environment 7.1 RS5 and I am facing some problems. I maintained SLD Data Supplier and SLD Used By Applications and they are OK. I did three different destinations SLD_Client and SLD_DataSupplier as HTTP (CE) and one more as RFC Destination type (Destination ABAP). All of them ping u201CSuccessfully connected to HTTP destination SLD_Client with response code 200. Content type text/htmlu201D. In my SLD Data Supplier Configuration the collect and send data are completed duccessfully. In Jco RFC Provider I did one RFC Destination which I called CE1_PORTAL_EPD and is pointed to R3 and is running OK. Finally when I want to maintain my Jco Web Dynpro (WD_RFC_FLIGHTDATA_META) the next message appears:
There are no message servers maintained in the associated SLD. Please contact your system administrator.
I changed my services file which is in C:\windows\system 32\drivers\etc\ services and add my port as:
sapmsXYZ 3600/tcp # SAP system message port System ID XYZ production, but the message is still appearing . What else is missing???
+ It is against Rules of Engagement to ask for points and solicit responses using points. +
Thank you very much
David Cortes
Edited by: Bhavesh Kantilal on Dec 3, 2008 11:42 AM

Thank you very much Suresh Pagadala, your answer has been very helpful.... I solved the problem, I had not patched the SLD Component.... in order to patch the CE must download the SLD component from....
https://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=LIST&HEADER=&FUNCTIONBAR=&EVENT=LIST&ONR=01200314690200006722&NTYPE=T_CV_DELO&V=MAINT&TA=ACTUAL&U=S0004970077&AI=SWTYPSC|&AI=PECCLSC|OS&AI=PECU_OS|OSINDEP&AI=DELO|10005117&AI=PVNR|01200615320900001553
Regards

My airport express frequently drops the internet connection. Once I unplug it and re-plug it in, everything is fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

My airport express frequently drops the internet connection. Once I unplug it, and re-plug it in, my Macbook Pro17,IMac 24, iPad air and my wife's Acer 15 works fine until it drops the signal again. This happens on a regular basis. Is there anything I can do ensure it maintains the internet connection?

It is tricky..
But yes it can be done as long as you use a different IP subnet to what is being used for the internet..
So I need to know what modem router you have?? Does it have wireless as that would make it very easy?
What IP is the computer getting?
Then I can give you the details to setup wireless statically on a different subnet.

Maintain the current row position of a table after refresh.

Hi,
I use a poll to refresh tables continuously. when a table is refreshed, the current referring row is reset.
To maintain the current row position after a refresh I use the following poll method.
public void refreshTableT1(PollEvent pollEvent) {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding dcb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer bindings1 = (DCBindingContainer) dcb.getValue(fctx);
DCIteratorBinding dciter = bindings1.findIteratorBinding("<VOIterator>");
if(dciter!=null){
if(dciter.getCurrentRow()!=null){
Key current_row_key = dciter.getCurrentRow().getKey();
dciter.executeQuery();
if(current_row_key!=null){
try{
dciter.setCurrentRowWithKey(current_row_key.toStringFormat(true));
}catch(Exception ex) {
System.out.println("Exception in current_row_key");
}This works for normal tables well. But when I use it to master-detail tables (pair of tables) it does not.
At the master-detail tables, before the first data fetch, it works well. if we go below the first data fetch, it sets the current row into another position.
how can I overcome this...??
Thanks,
Dinuka.

Hi Mr.Frank,
I have an association in two VOs.
for example: There are 2 tables called Emp and Dept. Every Department has Employees. so there is an association (both tables have a common column). Master table is the Dept table. when you click on one record of the Dept table Detail table will show the details of the employees belongs to that selected department. That's what I referred as master-detail tables. first one is master table; second one is detail table.
When the web page loads all the table data is not fetched from the db (it will depend on the fetch size). when we scroll down the table data fetch happens again and again.
think my data fetch size is 25 rows per time.
Suppose we use mine poll method and think I have clicked on the 20 ^th^ row of table1(master table). then the table2 will display details belongs to selected department. that is OK even after refresh. that works well.
when I go to 30 ^th^ row data fetch will happen (my fetch size = 25)
when I click on the 30 ^th^ row of the table1(master table), table2 will display details belongs to selected department. but after the poll method is called the selected row at the table1 disappears and is set to another position. now the 30 ^th^ row is not in the 30 ^th^ position. but it is the selected row and table2 displays correct details.
I think you have got the problem now. :D
Thanks a lot.
Dinuka.

I have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS?

i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.

First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd

Maintain the acct key and acurals/provisions in calculation schema-MIRO

Hi,
In PO we have maintained different delivery condition.
When we are doing MIRO we are getting error "maintain the acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE.
However we have checked condition type and calulation schema and found that acct key and accurals maintained.
YLB9     BivacInspec.fee/Quan
YLBB     LPRC charges/Quant.
YLBC     Port charges/Quant.
YLBE     Clearing Charges/Qt.
Please suggest somesolution.
Thanks
Ashok

Hi Ashok,
In M/08 check whether   acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE are maintained or not.
Also if they are maintained there then check in M/06 for condition type YLBB and YLBE , whether accurals check box are checked or not...If not check and then try.
Cheers!!!
Utsav

How to maintained the Text language for CKF keyfigure

Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQ

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

There is insufficant bandwidth to maintain the confrence...??

Similar Messages

Maybe you are looking for