There is more to life than Football
Having had a quick look at your listings, I see we have lost Drag racing, Baseball and North American Ice hockey. Am I right in that ESPN now starts at 10.00 hrs so that the live Ausie Rules games have just gone out the window.
As I said in the subject line there is more to life than 22 over paid prima donnas kicking a bag of air about, and in Englands case failing dismally.
Sounds like a good trip! I've just recently got back from Kotor & Podgorica in Montenegro, doing that trip by train, but I did the arrangements myself. Got to love travelling by train across Europe. You get to see so much & it's so much more civilised than flying!
Anyway, back to the original topic: What other sports should BT look to bid for when the rights come up? I'd like to see them go for the Super15 Rugby, as that would complement the AP and Top14 quite well (Yes, I'm a Rugby nut!). How about some of the Paralympics events such as the Athletics that's underway at the moment in Lyon? You could build on the success & interest from last year's Paralympics. I'd also like to see other sports like GAA added to the list...
Similar Messages
-
I currently have a requirement to create a time channel in the data portal and subsequently fill it with data. I've shown below how I am currently doing it:
Time_Ch = ChnAlloc("Time channel", 271214 , 1 , , "Time" ,1 ,1) 'Allocate time channel
For intLoop = 1 to 271214
ChD(intLoop,Time_Ch(0)) = CurrDateTimeReal 'Create time value
Next
I understand that the function to create and allocate memory for the time channel is extremely quick. However the time to store data in the channel afterwards is going to be highly dependent on the length I have assigned to the Time_Ch. In my application the length of Time_Ch is variable but could easily be in the order of 271214 or higher. Under such circumstances the time taken to fill Time_Ch is quite considerable. I am wondering whether this is the most appropriate way of doing things or whether there is a more efficient way of creating a time channel and filling it.
Thanks very much for any help.
Regards
MatthewHi Matthew,
You are correct that there is a more efficient way to do this. I'm a little confused about your "CurrDateTimeReal" assignment-- is this a constant? Most people want a Time channel that counts up linearly in seconds or fractions of a second over the duration of the measurement. But that looks like you would assign the same time value to all the rows of the new Time channel.
If you want to create a "normal" Time channel that increases at a constant rate, you can use the ChnGenTime() function:
ReturnValue = ChnGenTime(TimeChannel, GenTimeUnit, GenTimeXBeg, GenTimeXEnd, GenTimeStep, GenTimeMode, GenTimeNo)
If you really do want a Time channel filled with all the same values, you can use the ChnLinGen() function and simply set the GenXBegin and GenXEnd parameters to be the same value:
ReturnValue = ChnLinGen(TimeChannel, GenXBegin, GenXEnd, XNo, [GenXUnitPreset])
In both cases you can use the Time channel you've already created (which as you say executes quickly) and point the output of these functions to that Time channel by using the Group/Channel syntax of the Time channel you created for the first TimeChannel parameter in either of the above functions.
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
How do I keep this from happening?
And you are positive the headphones are plugged all the way in, meaning the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen. If so, try another headset to make sure the current one isn't damaged/faulty.
B-rock -
More answered calls than offered calls in Webview report.
Hi all,
I encounterd a strange thing in Webview.
How can it be that in an half hour intervall there are more answered calls than offered. ( See attachment)
Thanks for your explanations :-)
Greetings ChrisThe additional call might have been offered in the previous half hour and might have been completed in the current half hour. Thus, there will always be a difference in the offered and answered calls.
In the attachment, the previous half hour period had 6 offered, however only 5 answered. The 6th call got completed in the duration from 10AM to 10.30AM, hence shown as completed task in the 10AM half hour report.
You can verify and confirm this by using database query on the t_Termination_Call_Detail. Check for the number of calls offered from 9.30 to 10AM and check the start time and end time of the calls, you will get a clear picture. -
Page HTML Body Attribute - can there be more than one in this area?
In "Oracle Database Application Express Advanced Tutorials", Release 3.0, B32469-01 on page 10-10, in the section labeled "Create a Call to the disFormItems Function" in step 6........it reads:
//start citation
In the Page HTML Body Attribute, enter the following:
onload="disFormItems(); first_field();"
//stop citation
My questions are:
Can there be more than one "onload" statement?
If yes, how do you string them together?
Assume the second function I want to add is "disFormItems_local()"
Thank you,
MaggieOkay, I have figured it out, I believe. So, I will provide my own answer in case someone else is looking for this type of situation in the future.
I edited the page definition by adding another function, disFormItems_local(), to the HTML Header Attribute.
Next, I edited the item's HTML Form Element Attributes to call the function, onchange="disFormItems_local()"
Then, I created a call to the disFormItems_local function in the page HTML Body Attribute, onload="disFormItems(); first_field(); disFormItems_local();"
Other stuff that you will need to know is to be found in Chapter 10 page 8, Enabling and Disabling Form Elements of the 3.0 Advanced Tutorials. -
Can there be more than one initiator in a shared review?
We use Acrobat X Pro to do shared reviews of pdf documents. At times, the initiator will be out of the office when someone needs to take action on the document and it would make it more convenient if there was more than one person with access. Is it possible to assign two people as the "initiator" of the documents so that there will always be one available?
No, sorry.
If you're using email or own-server-hosted reviews there's nothing (technically) to stop another person signing on using the initiator's identity provided they know the password. If you're using Acrobat.com to host the reviews, and so the participants are using Adobe IDs, then in a legal sense you can't because the terms of use for an AdobeID do not allow shared access. -
Can there be more than one JVM Running on the same machine
Can there be more than one JVM Running on the same machine.
Even JVM's of different versions (or vendors) can run on the same box at the same time.
-
Can there be more than one icloud account on a computer? I have an icloud account with my iphone but would like to view my photo stream on my husbands mac. I do not have a mac but an older PC. thanks
Welcome to the Apple community.
The simple answer is yes you can. On a single user computer, the user can have secondary iCloud accounts, which they can add through the system preferences > mail, contacts and calendars. The only drawback here is that only the primary iCloud account can use photo stream. This can be worked around by having a second user account on the Mac. Each user account could then have a different primary iCloud account, one for you and one for him, your account could then receive your photo stream pictures.
Are you also aware that you can have iCloud on your PC and download your photos stream pictures to it. -
I updated my iPod Touch but then my computer crashed while it was updating and all my music deleted, so i would like to know how to redownload all my music just this once because there was more than $100 dollars of songs on there and its pretty unfair if ithere isnt a way redownload all that. and i did try backing up my ipod before updating but i cannot find the back up on my computer.
How to redownload purchased apps from the App Store
-
Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
cursor c_mar_principle(b_entry in number, b_book in varchar2)
is
select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
from MARRIAGES mar
where mar.entry = b_entry
and mar.book = b_book
order by principle desc, id asc;
rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM := rec.surname;
:P16_FORNAME_GROOM := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE := rec.surname;
:P16_FORNAME_BRIDE := rec.forename;
:P16_ENTRY := rec.entry;
:P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed. -
I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew PayzeAndrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John -
When using iPhoto can I remove some of the default options such as faces or flagged etc. from the left bar. There are more bits than I need for my basic use.
Hello Susan,
Not sure if I have fully understood your question but have you tried ...
iPhoto > iPhoto help > browse help > view and organise. Perhaps this touches on some of your needs.
Usually, best results for questions come from posting to the forum directly related to the question, in this case iPhoto. That tends to find the gurus
Would you like me to ask the hosts to relocate your question? -
AE 12.1 Crash: "There was more than one edit in the video track"
Here's the last log message: Last log message was: <140735209366288> <ImporterQuicktime::NativeReaderGetInfo> <5> There were more than one edit in the video track, defer to non-native quicktime for 0x1308a73a8.
iMac 27-inch, Late 2012
Software OS X 10.9
Graphics: NVIDIA GeForce GTX 680MX 2048 MB
Memory 24 GB 1600 MHz DDR3
Processor 3.4 GHz Intel Core i7
Areca 8050 RAID6 config (Thunderbolt)
AE 12.1 (Crash initially occured in previous version, which I don't know what it was - AE CC, but I don't know exact number - problably whatever the most recent update was)
My project has a bunch of ProRes files referenced... even when I move them, and After Effects marks them as offline, I just get this: Last log message was: <140735209366288> <ae.blitpipe> <2> Making New Context.
I have done some searching, and even if I go to Google, and put the search in quotes, I get nothing. It doesn't sound like anyone else has had just this problem.
Help?Sounds like the ProRes files are encoded oddly in a format that AE's own handler can't understand and while falling back to QT it crashes. I believe there are some known issues with this for ProRes 444, but then again I'm not a Mac guy...
Mylenium -
There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent
i have informed the police but they said the device could
be tracked if it turn on by its depend on serial numbers
Re: There are more than 70 new iPhones in boxes have been stolen so there are ways to locate them please ur support urgent -
Hi, I´m new at the community. My book about the life of a bull who died in a bull fight was a best seller in Perú, and is been studied in many schools there. But I don't live there any more. People ask me about the book and is not any more at the libraries. I would like to make a tradition to english, portugues, and may be another language that could be interesting to do.
I am a psychologist with an specialization in couple and family therapy. I am writing more and more material and the people who reads me are asking me more.
My mother thong is Spanish, my second Portuguese , and my third is english. I apologize if I make some mistakes trying to express myself.
The situation is that I need to upload my book to iBook and I don't know how to do it. If I can pass that step I will like to upload more material I am sure people will enjoy and learn as they did with my first one.
I really appreciate any help.
Olivesteoliveste wrote:
I need to upload my book to iBook and I don't know how to do it.
Read the FAQ and come back if you have questions after you have signed up
http://www.apple.com/itunes/working-itunes/sell-content/books/book-faq.html
Maybe you are looking for
-
Hi, We are about to enable SSO in our environment. As a result, I need to modify the value for user_pref("network.automatic-ntlm-auth.trusted-uris", "my domain");>>prefs.js. I created a simple .bat file to make the necessary mod and add the line to p
-
How can I format the double value?
Hi, I am trying to format the double variable as like, double var = 1234.56789 but i want that variable as like var = 1234.56 How can i do that in java? Please help me. From Parshuram Walunjkar
-
Internet keeps shutting down randomly
Just got my Mac Mini and love it so far, but my internet keeps shutting down randomly and restarting itself. Is there a lack of memory being used for it and is there a way to change it? If so, how much should I allow it to use?
-
How I can trace my lost I phone 5
Hello I have lost my I phone 5 is anyone know how to trace it as I tried it through iCloud but it will only work when other person will use the Internet and I have so Some important data in it so kindly help me out to either trace or block my phone.
-
Installation limit error?
The computer I am currently using has run Elements 9 in the past and has currently taken to not opening Photoshop. The only other computer (computer number 1) that it has been installed on is broken and I cannot uninstall it. I tried to uninstal it f