There is no bluetooth device in the device manager on my pavilion dv7 - 4065ei, does it exist?
I have a HP Pavilion dv7-4065ei on x64 Windows and I have never used the bluetooth device that is supposed to part of this laptop. I just know the specs from HP website say there is a BT device but I dont see it. I bought my laptop second hand so I dont know the original state.
I downloaded BT drivers on the official HP website (broadcom 2070) but I recieve an error during installation that sort of says there isn't any BT device on my laptop. There is no indication of any bluetooth device on this laptop even in the Device Manager.
I know there something I'm missing.
Any help please?
Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion, which is the full featured version of AirPort Utility for Lion. This version was released at the same time as AirPort Utillity 6.0.....perhaps you missed this.
If you still don't see a NAT tab...that would indicate that the AIrPort Extreme is in Bridge Mode (NAT is turned off...so there is nothing to adjust) and that NAT is being handled by another device on your network.
Similar Messages
-
No Bluetooth Adapter in the Device Manager (Windows 7)
I have a problem: theres no Bluetooth adapter in the device manager. On Mac the Bluetooth adapter works flawless.
A while back, my Bluetooth worked on windows. I used it to transfer files from my old phone to my macbook.
I tried to install the driver via the old Hardware wizard:
1. Starting C:/Windows/System32/hdwwiz.exe
2. "Install the hardware that I &manually select from a list (Advanced)"
3. "Show All Devices" - Next
4. Wait a second for windows to load all the drivers
5. Under Manufacturer, select "Apple Inc." and under Model, "Apple Bluetooth Driver"
6. Message showing up:
"The software for this device is now installed, but may not work correctly.
This device cannot start. (Code 10)"
Now the Apple Bluetooth Adapter shows up in the device manager under "System devices" but with the status: "This device cannot start. (Code 10)".
After that, I also tried to restart. Nothing changed.
I also tried to install the Bluetooth Driver from the OSX Windows driver disk. Installed without problems but didn't solve the problem.
Windows 7 64bit - up to date
Bootcamp 3.3
Macbook bought 2009
Model Nr. A1181
with Snow Leopard
Really looking forward for a solution on this problem.
RegardsSolution for me:
https://discussions.apple.com/message/15766324#15766324 -
Help with lost Droid MAXX. Lost it a week ago while I had it turned off, I cannot track it until it is turned on. Is there anyway to remotely turn on the device?
Have you tried randomly using Google - Device Manager? Though it will not track the Droid Maxx when it's turned off. It will show the last time the phone was turned on. To see if that coincides with the last time you had the phone on.
-
My 7 year old daughter has an iPod Touch 4 and she used the wrong password too many times. She thinks she remembers her password now but we have already exceeded the attempts and it says "iPod is disabled" connect to iTunes. Is there any way we can get the device to allow another attempt? We are traveling this week so don't have access to the serial number or the computer that was used to originally set up her iTouch. I don't even know what operating system it's on and can only see the home screen.
Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766 -
I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?
Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.
-
If i buy an apple product from the actual customer who bought it, and i face some problem with it, but the device is still under warranty, so would there be any issue for getting the device checked?
If you make an appointment at the Genius Bar about a problem, they will check and evaluate the device, and if it warrants a replacement under warranty, they make the final determination. We are users here. This is a user to user support forum. We cannot determine what Apple will do. I can tell you what I already did, the warranty follows the device.
-
I have 2 Apple IDs. 1 associated with all the family's devices and the other with no devices associated with it. Is there a way to split out the devices between the 2 IDs without losing Apps (iPhone 4s) or music (iPod classic)?
i'd be inclined to leave things as they are. Managing app updates over more than one account in the same library or device requires you to sign in and out of each account in turn. You cannot transfer content from one account to another.
tt2 -
Trying to transfer photos from iPhone to computer and it is showing 0 photos on the device. There are hundreds of photos on the device so how do I transfer the photos?
What photos?
Pics synced from computer to iphone are synced one way only - computer to iphone. -
RME 4.3.1 not showing devices in the device select menu
Windows Server 2008 Standard LMS 3.2 with RME 4.3.1
When I try to select devices to check/compare device configurations in the RME Archive Mgmt menu (RME -> Archive Mgmt -> Compare Configs) no device shows up for me to select. I know the configurations are being archived because when I use the Device Troubleshooting diagnostic tool it shows me the latest configuration fetched for a device
Since it doesn’t show me devices to select from, if I try to search for a device in the device selection, the query ends but nothing is displayed. If I select advance search I get an error window with the following message:
Problem with File /WEB-INF/screens/deviceselector/DeviceFilter.jsp!!!Exception in JSP: /WEB-INF/screens/deviceselector/DeviceFilter.jsp:77 74: if (classtype != null && classtype.length() > 0) 75: javaClassArray = devFilterUtil.getSubClasses(classtype, false); 76: else 77: javaClassArray = devFilterUtil.getClasses(); 78: 79: 80: String javaAttributeArray[][] = devFilterUtil.getAttributes(javaClassArray); Stacktrace
From other applications such as Ciscoview, Campus Manager, Common Services I can see all the devices configured on the system
This was working just a few weeks ago. There have been windows updates applied to this server lately, so I’m wondering if any of them is causing the errors.
Thanks for any information.
Jorge JilesThe EssentialsDM daemon is in a waiting to initialize state, which points to CSCte49301 as a potential cause.
Symptom:
The EssentialsDM daemon hangs in a Waiting to initialize state (as seen in the output of the pdshow command). Additionally, one might see "Error connecting to JRM" in Resource Manager Essentials applications.
Conditions:
This occurs on Windows servers after the patch for KB968930 is installed, and only if the Windows Remote Management service was started prior to starting CiscoWorks Daemon Manager.
Workaround:
Shutdown CiscoWorks Daemon Manager with the following command from the server's command prompt:
net stop crmdmgtd
Delete the following two files:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\lib\ctmregistry.backup
Restart CiscoWorks Daemon Manager with the following command:
net start crmdmgtd
If that does not work, then the Windows Remote Management service must be stopped, and disabled. Then, CiscoWorks Daemon Manager must be restarted. -
iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.
I think this article will help you.
-
I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. I NEED HELP 6 TCC TICKETS HAVE BEEN OPENED - PROMISED CALLS BACK AND NEVER GET CALLS.
About to cancel my account and move to AT&T
TCC TICKETS: (removed)
I am trying here for the last resort. After this evening my account along with my business account will be cancelled. Total lines that Verizon will have lost will be 93 lines.
PLEASE SOMEONE JUST HELP ME!!!!
I already tweeted and facebook messaged Verizon. Your CS group has gone down hill over the last 3-6 months. I use to enjoy being a customer.
>> Edited to comply with the Verizon Wireless Terms of Service <<not all the lines have ETF's. I have 30 tablets and the rest phones. The phones have ETFs and the tablets are all month to month.
The total to move my account over is going to come out to about $8500.
Rep has been trying to get my business for years. I was always loyal to Verizon until this happened. -
I trying to cancel the adobe illustrator CC monthly plan. I followed the direction of the web site but there's no cancel icon in the plan management page. I am paying more than 30 USD for several months for what I not using.what should i do?Creative Cloud Download & Install
Moving this discussion to the Adobe Creative Cloud forum.
Ssy10101 if you are unable to cancel your membership then please contact our support team directly at Contact Customer Care. -
Error 'The application id or shortname (-1) you entered does not exist.'
Hello,
When I run the OA page it opens without any errors,but I delegate to Other page for insert record it showing following Error
, Please help me to resolve this error.
oracle.apps.fnd.framework.OAException: The application id or shortname (-1) you entered does not exist.
at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
at oracle.apps.fnd.framework.webui.OAPageBean.renderDocument(Unknown Source)
at OA.jspService(_OA.java:87)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:392)
at OA.jspService(_OA.java:80)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Regards,
KapilHelllo Friends,
Issue get resolved. On page, there was one field with Item Style 'MessageLOVInput' and I had not given a source for 'External LOV' to that field.
Thanks,
Kapil -
There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?Hi,
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support -
I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain. Here is the script, need help at bottom
=======================================================
Set objShell = CreateObject("WScript.Shell")
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
IF Right(objComputer,3) = "000" Then
Else
strShortcut = objShell.SpecialFolders( "Desktop" ) & "\%username% Share.lnk"
strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
Set objLink = objShell.CreateShortcut( strShortcut )
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
objServer=Left(objComputer,7) & "-000"
objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
objLink.Save
End If
=======================================================
if "C:\Users\%username%\desktop\%username% Share" exits do nothing
if not create the folder and share it with everyone read only
======================================================
The section directly above is what I need to add, anyone have a clue how to make this work?Bill: Can you suggest a site? I am in the weeds here trying to get this done yesterday. I have been reading code and trying to figure this out since yesterday morning. I have to roll out this image to 2 dozen machines and
this is holding us back. Any idea which site I can post to for help?
The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you. That is why I have repeatedly suggested that you hire a consultant.
The link to the learning material is at the top o this page. You can also search the web for Windows consultants.
In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
Look up and research the FileSystemObject.
¯\_(ツ)_/¯
Maybe you are looking for
-
Hi, Today I upgraded from Leopard to Snow Leopard and iLife '09 to iLife '11. When I started iPhoto, it upgraded the photo collection. I'm trying to use the help tutorials to see what's new, but ALL help topics display as The selected topic is curre
-
Hi while try to deploy a SOA composite which contains BPEL process, I am getting below error regarding variable initialization. I am not able to understand what exactly is this error referring can somebody provide some pointers [04:23:24 PM] ---- Dep
-
Hi to all, May i know what is 4 system landscape? I can't get it, I have faced it in an interview, plz help me in this way. Thank u
-
Installed to DW4 and can't view remote files - version control
I have just set up my new laptop with DW4 adn can upload files, but in the files panel, for some reason, I can't just connect to the ftp server and view the files. Any idea why? All it says is "define its version control settings" why is this? in D
-
I have bought macbook pro with Retina display on 7th January. But its price was reduced and its cpu was upgraded to 2.6Ghz in February. Can I return it and get my money back?