There is no display on screen

no disply on screen

If your iPad's screen is not showing anything, and assuming that the battery isn't empty (it can take about 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

HELP PLZ, there is no display ,blank screen when i turn on

hey guys..
AM using Macbook pro. when i turn on, i cannt see any thing,its dark,i can hear sound but no display..how do i solve this problem..
what will be the repairing expenses and why i got this problem???..

Welcome to Apple Discussions
You have no boot volume - could indicate HD failure (or you somehow damaged/erased the system folder). You can try a restore at home... Restart holding command+r and restore your OS X. If that doesn't work yes you should take it to Apple.

Is there any option to display selection screen text in bold or big font?

Hi all,
Is there any option to display selection screen text in bold letters or with increase font size?
Thanks n Regards

Hi,
Just give atry in this way..
open the same program ans selection-screen screen no will be 1000 in se51 screen painter,
go to properties of the texts u want to change then go to display tab and check the checkbox bright.
it may or may not work but this will work in module pool .
just give a try...
Regards,
Suresh.

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

In my ipad mini sound is there but somehow display turned off....please help...how to turn on the display

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

How to display a screen in selection-screen?

hi friends,
I have a requirement. I have one PNP database SELECTION-SCREEN in my report program. And i have created one more screen using screen painter.
Now i hae to display that screen which i created using screen painter under PNP SELECTION-SCREEN.
For ex:
PNP SELECTION-SCREE.
Pernr Number    _______________
Employe Name _______________
Company Code _______________
Payroll Area     ________________
Now after this i have to display my screen which i designed using screen painter.
As shown below.
O In rupees
O In Percentage
   Variance______
Here i specified some fields only. some more fields also there.
For this i did as....
I created a BUTTON in SELECTION-SCREEN. And when the user clicked on this then screen will appear as window.
It's working fine.
It's look like this.
   |More Selections...|                            -
> Button
But,my client required that screen also wants to display directly under PNP SELECTION-SCREEN but not as window and clicking button.
If Any Help.. Plz....
Thanks & Regards,
Shree.

hi prakash,
thanks for ur solution.
but it's not working properly. while changing 1000 screen and activating, it's showing syntax error like this.
while changing:
==> Element PNPS$MCD touches or overlaps other element
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element
While Activating:
Syntax Error in Screen.
Program <myprogram name>
Screen   1000
Position Flow Logic       Line 95
The include block has been used twice.
But, Here i clicked the button "Activate".
Then It's showing messages as this.
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element.
I checked out that Line 95.
There i am specifying my suscreen as this.
CALL SUBSCREEN subscreen1 INCLUDING sy-repid 106.
at end of PBO.
And in PAI.
CALL SUBSCREEN subscreen1.
Finally when i tried to execute it's giving DUMP.
Any solutions..
Thanks & Regards,
Shree.

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

I have the mini display port cable to hdmi. When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display. How can I fix this?

System Preferences>Displays
There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

How do I get my contact's photos to display full screen for incoming calls?

I noticed today that when I get an incoming call it no longer displays "full screen". I keep missing calls because it now only displays as a banner at the top of the screen that someone is calling and their photo (if I've assigned one to them) is a tiny thumbnail.
Did I only just notice now that this is another 'great upgrade' with the new IOS, or is this some weird glitch with my phone? I've been wondering how I've been missing calls in the past week, but just happened to catch it today after I had been using the new map app and wasn't sure if it was just a coincidence or if it's somehow connected..?
Is there any way to change this or am I stuck with it this way??

I've never added my contact on my computer, I've always done it through my phone (I didn't know you could do it through the computer). The problem is not the photo, it's that the call doesn't come in and take up the full screen. Now when a call comes in, it displays as a banner at the top of the phone where the time and date normally would be, so I don't notice anyone's phoning.
As far as I can recall, it's only started happening since yesterday after I used the new map app. I've checked my notifications settings and the phone settings and so far as I can see, everything is set the same way it always was. I checked my hubby's phone to see if it's maybe something new since this last update to IOS6, but the call displays full screen (regardless whether the contact has a photo associated to it or not) and not a banner at the top of the screen like mine.
I still don't know how to change this back. Any other suggestions?

Cannot display the screen of the macbook on TV. OS is Lion 10.7.2. Connection to the TV is over HDMI cable. TV shows only the backgroud picture of Lion. Do you have any suggestions for help ?

Cannot display the screen of my macbook on TV. OS is Lion 10.7.2. The Macbook is connected to the TV is over HDMI cable. TV shows only the backgroud picture of the Lion OS and reacts even to mission control. Do you have any suggestions for help ?

You have the display set in Extended Desktop mode. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.

SE93 - There are no variants for screen 1000

Hello experts,
We cannot set variant for report transactions from se93.In our case, system prompts a warning as "There are no variants for screen 1000" But standard system variants (which are starting with CUS& or SAP&) are working fine. However, we can set them if we enter the variant name instead of using f4 input help.
There are a lot of entries about this issue on SDN but we want to do that on relevant system with using our own variants (using f4 search help) not system variants and I don't know how but we can also create transactions with own variants on different systems without any problem (which have same components and support package level)
Please note that, problem occurs only in se93 while creating tcode, there is no problem while using existing variants with tcode.
Please also see the below patch level information of relevant system ; (for core components)
EHP4 for ERP 6.0
SAP_ABA     701     6     SAPKA70106     Cross-Application Component
SAP_BASIS     701     6     SAPKB70106     SAP Basis Component
PI_BASIS     701     6     SAPK-70106INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     2     SAPKITLRD2     SAP Solution Tools Plug-In
SAP_BS_FND     701     6     SAPK-70106INSAPBSFND     SAP Business Suite Foundation
SAP_BW     701     6     SAPKW70106     SAP Business Warehouse
SAP_AP     700     19     SAPKNA7019     SAP Application Platform
SAP_APPL     604     6     SAPKH60406     Logistics and Accounting
Can you please help us on this issue ?
Thanks in advance.
Kind regards,
Alper Ozdemir
SAP R/3 NetWeaver Consultant

I have to respectfully disagree - any variant can be assigned to the transaction code.
Please try the following:
1) Start your report (I'm assuming it is a report?) in SE38 and create a variant.
2) In SE38, open the report and open its object list (menu Utilities -> Display Object List)
3) If you have already created a transaction, you should see the node Transactions in the left-hand window (i.e. object list). Double-click on the transaction name and switch to Change mode. In the field Start with variant type in the variant name from step 1. Note that if you try to use the dropdown it will say "No variants exist...", but if you just type in the name, it will take it.
Activate and do the same thing with the second transaction or create the new ones, if you prefer. Note that non-system variants will have to be either created in each environment or manually added to the transport. This can also be done in SE38 - click Variant radio-button, click Display, then go to the menu Utilities ->Transport Request and follow the instructions.
All above may also be done in SE80, I just prefer SE38 personally.

Acrobat Pro XI v.11.0.06 - PDF created by Microstation Print Organizer - Windows 7 - Printing shaded squares on top of shaded building and not displayed on screen, only displays on paper when printing

I have attached an image of the sheet to show the areas that are shaded. The building is supposed to be shaded, however the two squares within are not. These squares are not in the file converted to pdf and do not display on screen when viewing the pdf. Also there are several sheets in the set with shaded buildings and only two of the buildings have this issue. Any help with this would be greatly appreciated.

I'm seeing this same problem happen on multiple platforms here in the office. Every time this happens, the screen view does not show these shapes. I have been seeing the same problem except linework will be missing in one of these square shapes as well. Please give feedback if anyone knows what causes this problem. One thing to note - these squares are the size and placement of a selection box within acrobat. For example, if i use the selection tool and click near where the problem printed out, the shaded area that gets selected is in the exact same spot and is the exact size.@

Display seletion screen values in alv grid output

Hi,
I am changing from alv list to alv grid. In ALV list after displaying output, in application tool bar one button is there that is "Display selections", when i click it, is giving all selection screen values in a popup. i want same funtionality in ALV grid.
By
jagan

Hi,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program     = l_repid
      i_callback_top_of_page = 'TOP_OF_PAGE'
FORM top_of_page .
PERFORM populate_top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = ig_header.
ENDFORM.                    " top_of_page
*&      Form populate_top_of_page
FORM populate_top_of_page .
REFRESH ig_header.
CLEAR wg_header .
wg_header-typ = c_h.
wg_header-info = 'Selection Criteria:'(004).
APPEND wg_header TO ig_header.
CLEAR: wg_header.
IF NOT s_lgort IS INITIAL.
    CONCATENATE s_lgort-low '-'(111) s_lgort-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Storage Location :'(005).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_ekgrp IS INITIAL.
    CONCATENATE s_ekgrp-low '-'(111) s_ekgrp-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Purchasing Group :'(006).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
IF NOT s_werks IS INITIAL.
    CONCATENATE s_werks-low '-'(111) s_werks-high
           INTO g_text1 SEPARATED BY space .
ENDIF.
wg_header-typ = c_s.
wg_header-key = 'Plant :'(007).
wg_header-info = g_text1 .
APPEND wg_header TO ig_header.
CLEAR: wg_header.
CLEAR g_text1.
ENDFORM.                    " populate_top_of_page
Hope this is helpful...
Regards
Milan

FM to display Selection screen on report output??

Hi Experts,
Is there an FM to display Selection screen on report output.
Thanks In Advance.

Hi Ashwin,
Refer to below link
http://help.sap.com/saphelp_nw04/helpdata/en/2a/755b94ca5911d299af5c9604c10e27/content.htm
or
The easiest way is to define your selection screen in the TOP include of your module pool.
Then call the selection screen.
Selection Screen
selection-screen begin of screen 1010 as window title text-001.
selection-screen begin of block b1 with frame title text-002.
parameters: p_vornr type resb-vornr,
p_refno(20) type c,
p_plnid type zplcfg-plnid as listbox visible length 20,
p_sorts type c as listbox visible length 20.
selection-screen begin of line.
selection-screen comment (20) text-004.
selection-screen position 33.
parameters: p_order as checkbox default 'X'.
selection-screen end of line.
selection-screen end of block b1.
selection-screen end of screen 1010.
Now call the selection screen.
call selection-screen 1010.
if sy-subrc = 0.
perform get_production_orders.
perform process_orders.
endif.
Thanks!!

Display full-screen controls NOT visible

I exported my keynote presentation as a QuickTime full-screen movie. In Preferences, I have the controls checked to display full-screen controls and to never hide them. They do not show up anywhere. I also set the presentation as a slideshow to control the presentation using the arrow keys and they do not show up. In the Guide it states that as long as "Display full-screen controls" is selected in QT Player Preferences, you can make hidden controls appear by moving the pointer. They don't.
Any help out there would be appreciated...I have a deadline to meet!

Huh, I didn't realize you had to format a flash drive for a Mac, I'll check that out.
O.K. I may have something that I said I was going to try...I unlocked the file, changed *_My* permission_, the Staff and Everyone else to "Read Only" privileges, then locked again. I then zipped it and sent it to my son this morning. He said he could open it, change it but it would not allow him to save it! I'm going to test it further somehow but I don't know anybody else that has a Mac w/Keynote '08. Do you have Keynote 08? Can I send it to you to test (it would be alot easier) or to someone in the Keynote discussion area?
This message should now have a subject line..."Keynote presentation to CD to be accessed, but not changed?" When this all began, I searched discussions in Keynote on this and found nothing with a concrete answer, only that you cannot save a keynote presentation as password protected. I posted twice and no one answered. I think this part of our discussion will help Keynote people.
*Back to your area of expertise and my original question!*... Can you still look to see what key commands force the HUD for me for my QuickTime Movie as Slideshow? I know they could not change that, but the arrow controls would have to be displayed. I don't know what HUD means but I'm going to search too... I found this link: http://developer.apple.com/documentation/QuickTime/Conceptual/QT7-2Update_Guide/NewFeaturesChangesEnhancements/chapter_2_section9.html
Could you take a look and see if this is what I need? I do have Mac OS X v10.5.4 and QT v7.5 and my Preferences window does not have a recording tab but my Full screen window looks that same. When I view my A/V controls it also doesn't view as in figure 1-8. I'm confused again! QT 7.5 is the latest version, isn't it?

Is it possible to MANUALLY change Display Resolution (screen size) HELP!!

Forgive me if this has been covered already, but I have tried to look here and
there for an answer
My screen for my iMac-G4 blew out long ago, I had a another screen (a Dell CRT-
flatscreen) hooked up and IT blew out a few days ago, I just bought an LCD
flat screen, but it needs a 1680 x 1050 resolution (WIDE screen(?)and my
iMac-G4 only goes to 1024 x 768 in the "Display" controls. So all my desktop
images are "scrunched" or "stretched".
So is there a "MANUAL" way of configuring the screen size to a "standard"
size within this Mac? or do I need to find a standard size screen?
. . . HELP!!!
You can also write me (preferably at) at:
[email protected]
I VERY MUCH appreciate any help- please realize too, that I am an IDIOT when it
comes to computers, I just paint on this thing (as part of my job as a freelancer
on the side), and WAS in the middle of a job for a client
Thanks again,
-MAVIII

Hello and Welcome to Apple Discussions.
Apple limited the graphics cards in iMac G4s to the native resolution of the built-in LCD i.e:
15" iMac G4 - 1024 x 768
17" iMac G4 - 1440 x 900
20" iMac G4 - 1680 x 1050.
Even when connecting a second display this could only mirror the internal at the same resolution. For the following iMac G4's it's possible to install a firmware hack to open up the full capabilities of the graphics cards:
17" 800MHz
17" 1GHz
15" 1GHz
17" 1.25GHz
20" 1.25GHz
using an application called Screen Spanning Doctor. This is risky but I guess you haven't got much to lose at this point. I've only ever heard of one Mac user actually failing to do the process right though.
You can always use Firewire Target Disk Mode to recover you client's files to another Mac.
I'd be interested if SwitchResX works too. I only have external displays much smaller than my iMacs so can't test it from that perspective.
cheers
mrtotes

Mail app not displaying any screens - Missing after reinstall

I've had my MBP for a few months and just decided to try to use the Mail app but it won't display any screens or "windows" no matter what I choose in the menu bar. It's showing up as though it's running in the icon bar at the bottom and the menu bar at the top but there's just no application window to work in.
I ended up deleting the app and trying to reinstall it from the disks that came with the laptop but once I did that now I can't get the app to even show up in the Applications folder or in Finder.
Any thoughts would be appreciated.

If you have installed from disc with a version of OSX earlier than you currently have, then you must first download the Combo Update for the version you want to be running, and apply that over the existing OSX. That will increment Mail to the matching version. Keep me posted, as there may be other issues.
Ernie

There is no display on screen

Similar Messages

Maybe you are looking for