There is no horizontal scrolling bar on the bottom of my Final Cut Pro 10.1.2. Please Help!

I normally see a horizontal bar that allows scroll through your project. Once I updates it's been missing! Hellppp!

In addition to the good information and advice already given: looking at the screenshot, it is a safe bet that you are on a laptop. I work on a MacBook Pro every day and I hardly touch on scroll bars, and I haven't in maybe ten years. Why? Two finger scrolling. It is so much more effective and ergonomic than reaching for the scroll bar. Just put two fingers on the trackap and drag.

Similar Messages

Umwanted horizontal scroll bar at the bottom of the screen

Hello,
Our application is a plug in to the Solution Manager Workcenter. The initial screen of the application
contains two tables, one below the other.
The ROOTUIELEMENTCONTAINER has a matrix layout, and both the tables' layout has been set to MatrixHeadData. Width of all has been set to 100%, and the 'stretchedHorizontally' property has been enabled.
However, I am getting a scroll bar at the bottom of the screen which is unwanted. Please suggest a way in which I can get rid of this annoying scrollbar, so that the tables are contained within the screen.
Thanks!
Shalini.

scrollbars at the bottom of the screen only appear if the contents of the screen pass the right border.
the 100% width isn't going to change this. It only defines that the table must take at least 100% of the screen, but if it needs more, it will take more.
In other words:
remove unnecessary columns to be able to keep your contents inside the screen.
btw:
if someone else works with a smaller resolution, he will have the scrollbar anyway.

Horizontal scroll bar for the adf page

Hi,
We have around 7 tables in single jsff page. Here , we have a requirement like :
We need to show horizontal scroll bar for the entire page instead of each table. Is there any way to get this.
As of now, we have horizontal scroll bar for each table, but our customer is not accepting this, that want the scroll bar for the entire page.
Please suggest the approach.
Thanks

I have grouped all the tables in panelgrouplayout.So, what is the problem (because it is not quite clear what you need)?
If your PanelGroupLayout is with layout="horizontal", then the tables will be rendered next to each other horizontally but there will be no horizontal scrollbar on the page.
If your PanelGroupLayout is with layout="scroll", then the tables will be next to each other vertically and there will be a horizontal and a vertical scrollbar on the page (if necessary).
If you need your tables to be relocated next to each other horizontally and to have a horizontal scrollbar on the page, then use a PanelGroupLayouts(horizontal) inside a PanelGroupLayout(scroll):
<af:panelGroupLayout layout="scroll">
<af:panelGroupLayout layout="horizontal">
    <af:table> ... </af:table>
    <af:table> ... </af:table>
    <af:table> ... </af:table>
</af:panelGroupLayout>
</af:panelGroupLayout>If your problem is that you still have horizontal scrollbars inside the tables, then you should set appropriate widths to the corresponding tables (e.g. to <af:table> tags) such that they are large enough to fit the sum of corresponding column widths.
ya, I know that its not god design, but its customer requirement, so we need to do that.If you expect some table(s) to be stretched automatically according to the size of browser's window, then you should re-think your UI design because PanelGroupLayouts do not stretch their children. A possible solution is to use a combination of PanelSplitters or other layout containers that stretch their children.
Dimitar

No horizontal scroll bar on the Jtable. In order to see long column.....

No horizontal scroll bar on the tJable.
In order to see long cell data we have to eliminate other columns of the table.
I need an horizontal scroll bar on the JTable if the data in a cell is longer.
Could somebody help me out?
Thanks in advance.

in the jtable use following method :
myTable.setAutoResizeMode(this.AUTO_RESIZE_OFF);
KR,
Jan

Set the horizontal scroll bar for the OOTb document library view

hi all,
Am facing an issue in my sp portal.We have designed and developed the portal with OOTB document library views for site columns also. Going to enable the doc lib view. but we have some 35 columns in eeacha nd every document
library within our sub site. But if an end user wants to see the last column then he needs to scroll. but, since then my master page has fixed width, the top corner will be seen as blank. would like to know how can we set horizontal scrolling
in this doc lib view .
Das

Hi,
According to your description, my understanding is that you want to set the horizontal scroll bar for the document library when the last column postion exceed the fixed width.
I suggest you can try to use Jquery to set the width attribute of the menu bar dynamically if the document library width exceeded. You can add the Jquery or CSS style using SharePoint Designer under the PlaceHolderMain tag of document
library page. Also, you need to find the div id in your environment using Internet Explorer.
More information:
http://sharepointpromag.com/sharepoint-development/sharepoint-branding-101-branding-master-pages
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Web page does not fit screen. now have scroll bar at the bottom

2 problems exist and i have tried to find solutions to both with no luck. On Firefox 16.0.2 using XP Pro.
First: Web pages no longer fit screen. Now have scroll bar at the bottom. For some strange reason this just started. I tried the CTRL+ 0 with no luck.
Second: At the same time the above started when i open a program it opens in a reduced screen size and i have increase it to full screen size. This also occurs when i have it reduced 9in the system tray and i bring it back to the desk top.
I have made no changes to firefox these problems just started. A reboot of the computer did not help

Did you check the window settings of the Firefox desktop shortcut to see how Firefox opens?
Did you try to delete the current Firefox desktop shortcut and create a new shortcut?
Use Restore or Maximize in the right-click context menu of the Taskbar icon to set focus to the Firefox application if you do not see the Firefox window.
Open the system menu of that Firefox window via Alt+Space and see if you can move and resize that window (use the keyboard cursor keys).<br />
If that works then first close all other open Firefox windows and then close Firefox via "File > Exit/Quit" to save that setting.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to change the white balance in Final Cut Pro?

What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

There is some specific help in this trainng book:
http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
5) Do the same thing with the blacks
6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

How do i export multiple full resolution movie files at the same time in final cut pro 6?

I've been using Final Cut Pro since version 3 came out, know the program well, have even had jobs consisting of just operating the program. I'm currently running version 6 because that's the latest one that works on my computer. Back in verison 3, there used to be an option under Export to export a "Final Cut Pro" movie, which was really a Quicktime movie but appeared with a FCP icon and defaulted to opening in FCP, but the important thing about it is that it was a full resolution copy of the movie with no compression. Now, that option seems to have been changed to "export Quicktime movie." In my opinion that change is kind of stupid since it is so much less specific and is even less of an implication that one is exporting a full resolution file. But in fact you are.
One also has the option of using Compressor to export a version of a movie, and therein there are so many different options that if you are not confused by it I think there's something wrong with you. Moreover, it would appear that there is no equivalent of exporting a full resolution version of a file in Compressor. Fair enough: a full-resolution file involves no compression so is not appropriate for "Compressor." BUT, suppose you want to export multiple uncompressed, full-resolution movies at once. When you use Compressor, you are able to create batch lists and export many things at the same time, for instance, lists that will take many hours to complete so you can go to bed and get the results the next day. But as far as I can tell there is no way to do this at full resolution without compression. Instead you have to sit at the computer waiting for each one to finish and after each one, manually go to the next and select "export Quicktime movie." Even if there is a way to do this I would complain that such an obviously desireable thing is so unaccessable. In fact, the only reason I've typed out my question at such length is because I'm stuck here waiting for each one of my movies to export.
Anyway, all my complaints aside, anyone know how to do this?

what you're missing to export multiple files is the batch export command available in the file menu or by control clicking on the items in the browser. You can export multiple sequences/clips at full resolution with this.
This has been available in fcp for a long long time.
Wow, you are right. Now that you mention it, I can't believe I never noticed that. Thanks.
Only if you have the 'Self-Contained' box checked. Otherwise you'll end up with a reference movie.
Correct. That box is typically checked by default. There are other default settings you could change that would not result in a full-quality version, but what I meant was hitting that option from the pull-down menu, then changing nothing and hitting ok.

How do I continue editing a project from the trial version of final cut pro to the paid version

I have been working on a project on the trial version of final cut pro x. I bought the full version even though my trial wasn't up yet. When I opened the paid version my projects from the trial are not in there. I also closed the trial and opening the paid version and my projects were still not there. How do I get my projects to show in the paid version?

I have a 'similar' problem, but your advice above does not work (or does not seem to work). My Trail version of Final Cut Pro 10.1.1 expired before I completed my first/only movie project.
I purchased FCP yesterday. Now I want to "import" the video files and the movie project (not sure if that's the correct terminology - I am still a newbie) into FCP 10.1.1 - Please advise?

What are the system requirements for Final Cut Pro 7?

I can't find the system requirements for Final Cut Pro 7, I can find the system requirements for X, but like I said not 7.
I need to know the system requirements for Final Cut Pro 7, so I can buy the correct Macbook.
Is there anyway I can find out the system requirements.

Thanks
I'm somewhat inept about things like this, so I just want to make sure once more: This is in regards to Final Cut Pro 7?

Timeline navigation in the newest version of Final Cut Pro.

I have upgraded to the newest version of Final Cut Pro. What happened to the slider at the bottom of the timeline that moves my project on the time line? It's not there and it's harder to navigate the time line without it.

Have you double clicked on a project to open it in the timeline? If the timeline zoom/appearance controls are missing when you load a project onto the timeline then I would think that either you should delete your prefs or redownload the app. But wait for someoine with more points than me to answer b4 you actually redownlaod it.

Natively import the canon xf305 in Final Cut Pro X?

Is there a driver or plugin to natively import the canon xf305 in Final Cut Pro X?

Ok so, I'm upset that there is no native import from this camera. I have four of these cameras!!! But, I did find an interesting work around! I don't loaded free software from Sony. The same software used to convert XDCam to Final Cut. and it works great, not as great a native import. but here's the website I downloaded it from, http://pro.sony.com/bbsc/ssr/micro-xdcam/resource.downloads.bbsccms-assets-micro -xdcam-downloads-PDZKP1XDCAMTransferSoftwareTC.shtml

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to store update?

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??

HT4722 I downloaded the trial version of Final Cut Pro, but am unable to install it. This is the final name, 'FinalCutProTrial10.0.6.dmg.crdownload'. What do I need to unzip it or install it?   Thank you.     Rob-

I downloaded the trial version of Final Cut Pro, but am unable to install it. This is the final name, 'FinalCutProTrial10.0.6.dmg.crdownload'.
What do I need to unzip it or install it?
Thank you.     Rob-

It says: There is no application set to open the document “FinalCutProTrial10.0.6.dmg.crdownload”,
when I try to click on the file. It has downloaded completely.

There is no horizontal scrolling bar on the bottom of my Final Cut Pro 10.1.2. Please Help!

Similar Messages

Maybe you are looking for