There is no Internet Tethering option under settings cellular data on my iPad3. I am using BSNL 3G on my iPad. The options under settings cellular data are: Cellular data Data Roaming APN Settings SIM PIN SIM Applications. Is there any solution to turn

There is no Internet Tethering option under settings>cellular data on my iPad3. I am using BSNL 3G on my iPad. The options under settings>cellular data are:
Cellular data
Data Roaming
APN Settings
SIM PIN
SIM Applications.
Is there any solution to turn on wifi hotspot?

You might have better luck contacting your carrier - is this a feature they support?

Similar Messages

Verizon Iphone 4 without sim card is locked because of forgotten passcode. Can't access serial number because of having no sim tray. Never synced with itunes. Recovery mode always comes up with an error. are there any solutions on resetting the phone?

Verizon Iphone 4 without sim card is locked because of forgotten passcode. Can't access serial number because of having no sim tray. Never synced with itunes. Recovery mode always comes up with an error. are there any solutions on resetting the phone?

Are you looking for the serial number or the IMEI? If the phone was active on your Verizon acount, Verizon can give you the IMEI.

Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx

Why doesn't my iPhone 4 have an 'Internet tethering' options? Is it carrier related or iOs related? Please help me find the solution for this. thanx

Personal Hot spot
http://support.apple.com/kb/HT3574
Understanding
http://support.apple.com/kb/HT4517
Trouble Shooting
http://support.apple.com/kb/TS2756

TS3276 OSX Mavericks Mail : I configured Yahoo! id in OSX mail, I noticed that sent mails are stored on Mac and not getting stored on Yahoo! sent (server) although I gave the option to store on server in preferences, is there any solution?

I configured Yahoo! id in OSX mail, I noticed that sent mails are stored on Mac and not getting stored on Yahoo! sent (server) although I gave the option to store on server in preferences, is there any solution?

Found solution of forum...

Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. Is there any way to turn this off ?

== Issue
==
I have another kind of problem with Firefox
== Description
==
Say I turn off my Computer or restart it & then I load up Firefox the pages I was previously at loads up. This is very very very annoying & I see no options in the settings to turn this off. Is there any way to turn this off ? Even if I just press the X button to close Firefox then later in the day I open Firefox the previous pages always open & it is annoying. I apologize for the language but that is just how ''irritated'' & annoyed I am about this
<blockquote>language cleaned up by a moderator - eh</blockquote>
== This happened
==
Every time Firefox opened
== It started randomly
==
== Troubleshooting information
==
There was nothing in the Troubleshooting about this
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Default Plug-in
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.1 r53
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.50106.0
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Hello David.
Go into ''Tools > Options > General > Startup:When Firefox starts:'' and configure it as you want (probably to show your home page?). This is the very first option that appears in the options screen, but I understand that it may not be very easy to find. Firefox 4 will not include any redesign to the options screen (except possibly it appearing in a tab, rather than in a popup), but you may interested to know that there are plans to redesign the options screen for versions after Firefox 4, to make it easier to use. If you want to know more about the redesign, just ask.
Anyway, if that doesn't help (it probably does, but just in case), it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

When i use zoom on websites the scroll is not smooth! Is there any solution?

when i use zoom on websites the scroll is not smooth! Is there any solution?

Tools > Options > '''Advanced''' - General <br />
Under '''''Browsing''''' do you have '''Use smooth scrolling''' check-marked?

LWAP AP1131 Is there any way to turn off the Round BLUE LED

The 1131 Access point in IOS mode had an option to turn off the BLUE LED circle on the access point. The access point has been converted to LWAP and connected to controller and now the BLUE LED circle is back.... is there any way to turn it off ??
Can not see an option on the controller.
Very bright in a dark room (ie hospital beds...)
Charles

Hi tdennehy
Well, first of all thanks a lot for your replay. We have perfect LOS with certainly more than 60% of the Fresnel zone being clear. The Yagi antennas are pointed at each other with no doubt, we actually got while in the "install root" and "install non-root" bridge mode the I and R LEDs on and stable, and S blinking. At times we got all the LEDs blinked fast but I guess we were passing through some strong signal concentrations. Heh, the client sugested to install the Yagi antennas as the omni but I just ingnored him, what else could I say hehe.
When we were installing all the equipment I had a play with different channels and it seemd like CH 1 worked best. The antennas use the cable they come with because the BR-1310 bridges we have installed right beneath the antennas, only the coaxials cables go down to the office to the power injectors.
Please see the attached screenshot from the signal and SNR reading. It seems like we have a little bit of noise. The signal was -61dB to -63dB on the installation day but 2 weeks later it went down to about -65dB.
So, you suggest we rotate both Yagi antennas by 90 degrees correct? I guess one needs to be turned clockwise and another anticlockwise correct? What de we actually gain by doing that? We change the polarization from vertical to horizontal? Could you please explain it to me a little bit more?
Thanks in advance for sharing your experience. I am going to troubleshoot this on Monday so I would be great if you could give me some sugesstions. I thought of changing the Yagi antennas to 19dB direccional flat pannel of 3rd party but with this distance 13,5dB yagi I think are sufficient. Does the "distance" settings on root bridge have impact on the signal sterngth?
One more question, at the moment the 2 connected offices are in the same subnet so to speak in the same broadcast domain. On one site (non-root bridge) they have up to 150 client connections to the servers on the other site (root bridge) but with 20kbps per station making it roughly 3Mbps total bandwidth needed. When they connect all at the same time, our client say the wireless link go. I really don't believe that becasue on the wireless readings we get betwenn 18 and 24Mbps so it should be way more than enough. Do you think by putting both sites in different VLANs would help a little bit so the local traffic would not need to be broadcasted over the wireless link back and forward? Can you shed on that a little bit of your experience? I suspect they have something to do with the switching on local site because when I was pinging the non-root bridge from the local site but connected to a different switch then is connected the Cisco bridge, I got funny reposnses, between 5 and 40ms over ethernet with 10 connections to the remote site over the wireless link but when we pingged the same CIsco bridge from the local site but connecte to the same switch as the Cisco bridge the responses were 1ms. It makes me think that they have some broadcast storming on the local site and that also propagates the wireless link...

What is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.

what is up with this err = 9006? is there any solutions, this is ridiculous considering the time and money i'm wasting (mostly the time) i have seen no solutions thus far.

I've found the following on that page for error 9006 :
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

When sharing screen from work with my home computer, is there any way to turn off the display at home?

Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It seems a bit of a waste of power to have the screen on when I'm not actually there - I just need to be able to see all my programs etc on the remote screen in order to use them. My home computer is a 2011 iMac running latest Mountain Lion, work is a 2010 MacBook Pro.
Thanks in advance!
Matt

I've set up another user on my home Mac and left that one logged in. Now when I connect from work it asks me if I want to share the screen or log on virtually as my user. I think choosing the second option doesn't power up the screen.
Matt

Is there any way to turn missing photos back into printable jpegs?

Using LR 5. Lost about 1500 jPeg images due to corrupted disk drive. However, LR5 still displays a remarkably sharp image under "missing photos". Is there any way to turn these back into printable jpegs? These are family vacation photos that had not yet been backed up to additional drives.

You want to extract LR previews as images. Googling for this shows several links:
http://helpx.adobe.com/lightroom/kb/extract-previews-lightroom-4.html
http://regex.info/blog/lightroom-goodies/preview-extraction
http://photo.bragit.com/Lightroom/articles/RecoverFromPreview.shtml
http://lightroomsolutions.com/extract-previews-in-lightroom-4/
http://www.robcole.com/Rob/ProductsAndServices/PreviewExporterLrPlugin/

My tabs are seperated into groups. Once I accidentaly opened a site in a new window (not a new tab). After that, I accidentaly closed the Firefox window with all my grouped tabs. Now, I can't recover it. Are there any solutions?

I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?

Hi,
We have rolled out a fix for this issue.
Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
Please let us know if you still face any issues.
Thanks,
Ashu Mittal

Is there any solution to the colon translation bug?

Mac OS X has reserved characters that cannot be used in file or folder names. One of them is the colon: It is used by the operating system in paths to designated separate directories and files, exactly as Microsoft uses the backslash character for the same purposed.
However, Mac OS X is 'supposed' to translate colons to another character when saving files from within an application or the Mac OS X Save dialog. The typical translation is to forward slash or dash. For example, "Bug: Colon Translation" becomes "Bug- Colon Translation". Of if I am saving a web page to a PDF, the source name of an article with this title would change to "Bug/ Colon Translation".
The bug: The above colon translation process does NOT work reliably in the Mac OS X Save Dialog with reliability. I guestimate that 95% of the time the translation of colons in source titles does NOT work. Using the example of translating a web article title to a PDF saved file, the results are typically the following: "Untitled.pdf". This forces the user to copy then paste in the actual title of the article. THEN, 100% of the time, the colon translation actually works. For example, if I have a web article titled "Bug: Colon Translation", it is extremely rare for that title to be anything but BLOCKED, resulting in 'Untitled.PDF' as the resulting title in the dialog box. When I then copy and paste the source title into the title area, replacing 'Untitled', I get: "Bug- Colon Translation".
What will happen perhaps 5% of the time: The colon translation of the source title will actually work. When this occurs, using my example above, the OS provides the following translation: "Bug/ Colon Translation". Note that when it works in this situation I get a forward slash, not a dash.
I research, read and save web articles all day long. A lot of articles use colons. I have to contend with this bug all day long every day. This bug is many years old. I can't recall when it started. But it certainly has been consistent in Mac OS X 10.5 Leopard, 10.6 Snow Leopard and now 10.7 Lion. Three versions of Lion are enough for me to realize that Apple is either oblivious to this bug or they don't care.
Clearly, the colon translation CAN work. It is MEANT to work. No one can dispute that. The user is NOT supposed to be messed over with 'Untitled.PDF' files. They are MEANT to have actual PDF file titles, as seen in our example above.
Therefore the question:
Is there any solution to the colon translation bug?
It is incredibly annoying.

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

SD card reader is not working in my MBP early 2011. Is there any solution?

SD card reader is not working in my MBP early 2011. Is there any solution?

on my macbook iphoto didn't recognise my camera or card reader after upgrading to iphoto '11,
Evenutally I went to an application called Image Capture which I seem to have already. This read the camera contents. I selected the images I wanted and then imported them into iphoto which was one of the options given. It worked. God knows why one has to go through two steps. But I'm feeling pretty triumphant. This may help you if you haven't already sorted it.

Spotlight searching everything except email. Is there any solution.

Spotlight searching everything except email's .Is ther any solution? Please help me to solve this issue.

Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-

There is no Internet Tethering option under settings cellular data on my iPad3. I am using BSNL 3G on my iPad. The options under settings cellular data are: Cellular data Data Roaming APN Settings SIM PIN SIM Applications. Is there any solution to turn

Similar Messages

Maybe you are looking for