There is no obvious save facility in iMovie.  How do I save part-complete work?

Ive added music and credits to a clip, just to start learning iMovie 10. (on OSX 10.4, Mac Mini).  This displayed and played within iMovie, but I could see no way to save this, something like a save button, or menu entry.  Export type facilities also didn't work.   When I reopen the changes are not there. Basic stuff anyone would want to do.  How do I do it?
Thanks

Hi Matt,
thanks for your reply.
I hoped it was autosave, but....  when I reopened the view I saw was of the imported clip / audio but without any of the editing I had done: music edit and alignment, and credits - all seem to be gone.  I tried to find different perspectives, but without luck.  After your reply I'm wondering if I made a schoolboy error somewhere.
Phil.

Similar Messages

  • Is there free voice mail service? if so how do i get it to work? all i see when i click the voice mail icon is the accept/decline for visual voice mail and that says theres a charge?

    Is there free voice mail service? if so how do I set it up? When I click on the voice mail icon all I see is the accept/decline agreement for Visual Voice Mail and it said something about charges will be applied on my bill so I declined.

    Your Basic voice mail is a free required program for you if you do not want Basic Visual Voice mail (free) or Premium which is a paid service. Basic Voice Mail set up is free and easy to do.
    1. Sign in to your My Verizon online account.
    2. On left side of page in Blue letters find the drop down menu. Click to open menu then go to change features and locate Basic Voice mail and click the Red add button.
    3. When you're done making this change click next at the bottom of the screen and then ok.
    4. Now go into your device and set up your  Basic voice mail program. You may continue to receive an error message for a period of time “Visual voice mail update”, just clear and disregard.

  • Is there a way to save the complete windows partition before upgrading the hard disk?

    Hello all,
    I am planning on installing a new hard drive in my MacBookPro, 2.4 ghz, model 3,1, Intel c2d, but before I do, I am concerned about how to save the contents of my Windows partition as I can not afford to lose the data I have on that part of the computer.  I regularily back up my Mac's contents to a Western Digital MyBook 2.0 500GB drive, but as far as I can tell, this only backs up the Mac content on my computer and doesn't touch the windows partition.   I also do not have the discs that came with my MacBookPro any longer thanks to a storage unit thief, so I am unsure of how to restore my Mac data onto the new drive from time machine without the discs.  Any help with either of these issues is greatly appreciated!
    Thanks!

    Who says you'll only use it once? Hard drives do fail and they fail at any time. Even SSDs fail.
    You can buy Parallels or VMware Fusion and make a Virtual Machine of your current boot camp Windows install then not worry about that Windows partition.
    The reason I don't have a Windows partition is many years ago I dual booted Windows versions and Linux and hated it. Always needing to go back to one of the other OSs then back to the other. With VM software that is a thing of the past.
    If you use Windows for 40-70% of your computing I suggest you invest in a Windows PC and Use the Mac for what it was made for, OS X programs.
    If your Windows computing is limited to office and the like programs then a VM may work just fine for you. It doesn't for me as I run heavy CAD programs and Photoshop on my PCs. But the VM on my Mac works for what I may need Windows for on a Mac.

  • Newest iMovie - how to move selected parts of clips from events to trash

    Hello,
    I have used to import clips to events and than trimmed them down with the function "reject selection" and than when I used "Move rejected clips to trash" or something like that, iMovie removed the selections from the clips and generated new clips ones. It was fast and very nice feature.
    Now, with the new version I can't seem to find this functionality? Am I missing something?
    Kind regards,
    Uros

    Got the same problem. The menu item has disappeared in this botched-up job of an iMovie upgrade. When I tried to select rejected clips/segments and move them to the trash I was told to wait until iMovie has finished running tasks and that I'm to check the activity indicator. Problem is, there're no running tasks and no activity indicator!

  • TS1424 When I purchase an album on itunes alot of the songs havnt downloaded fully and there isnt an error message either. So how do I get my complete purchase??

    Could some pls help me with this?? I have windows 7 with Mobile Broadband internet. Alot of the recordings/albums are incomplete after down loading them. Any assistance would be appreciated. Thanx

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Save part of a screen as jpg

    is there another way to save part of screen as jpg besides
    bitmapexporter (quasimondo)?
    i use as2.
    thanks

    It is doable, but not with actionscript 2.0 you need to run
    Actionscript 3.0 and then you can use the jpegencoder class to grab
    parts of the screen or even the whole screen

  • I have a page showing up when I run my Keynote presentation that does not belong there and is not in the navigation area-how do I remove it?

    I have a page showing up when I run my Keynote presentation that does not belong there. It's not in the navigation area so there is no obvious way to delete it—how do I remove it?

    Not sure if these will help... In the navigator view, is there a triangle next to the slide that appears before the slide that does not belong? If so, click it and you might find the extra slide in there. Or try View Menu:Light Table and see if you can find it in there.

  • I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

    I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

    The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
    The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
    Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
    This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

  • Is there any way to save a browsing session i.e. save a window of tabs?

    If i am browsing a subject and have several related tabs open is there a way to save these tabs in a group so i can open them all together again? I dont necessarily want to open all these tabs on start up but maybe in the future sometime when i am browsing this topic again.

    OK thanks but that just bookmarks the pages - i want to be able to open them all up again at some time in the future when i am working on a certain subject.
    And i dont want them to open up every time i start firfox.
    Found this comment on review of tab saver add on page :
    ''For people that do a lot of inter-related research with many tabs on many firefox windows open is to be able to save a whole windows worth of tab addresses to a document to be opened later. This is needed because at some point your resources become over taxed and at best slow operation, at worst a chrash. this would allow for one page to be saved and re-opend at a time rather than closing down and saving them all, and opening with the same resource headache.
    you could save windows for a specific search theme seperate from other windows-search themes until resource problem is removed below resource problem threshold. ''
    So i guess for now its not possible but it seems like such an obvious feature to include......

  • I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

    I am using the old imovie HD on my old Mac laptop... it works fine, but when I export a video to YouTube there is a black frame around it.. how do i get rid of that? thanks!

    Hi MyAppleID99,
    You may want to check to make sure the clip hasn't been moved back and forth between wide screen and standard aspect ratios; sometimes a combination of letterboxing and pillarboxing can lead to a black frame "windowbox" when playing the final video. You may find the following article helpful:
    Apple Support: What are Letterboxing, Pillarboxing and Windowboxing?
    http://support.apple.com/kb/ht2320
    Regards,
    - Brenden

  • New STB - Is There a Way to Save Recordings?

    Verizon is sending me a new Motorola DVR since they determined my current one has a problem.  Is there a way to save my recordings?  I saw the option to export series to the cloud.  I clicked on it and it said okay.  I don't see an import option unless that only shows up when I get the new box.  Does this actually do anything?  And does it only save the series or will it save my actual recordings too?  Buying an esata drive isn't worth it for me.
    Also, they are replacing the box because I suddenly can't get Channel 689 (BBC America HD).  SD works fine, but can't get HD.  Is anyone else having this problem?  I heard from "tns" in this forum that his was fine in VHO 5.  Verizon said there's no outage of which they are aware.
    Thanks.

    In general there is no way to move content from one DVR to another. The only thing you can do to 'save' content is to record it to something else like a VCR or DVD.  All outputs on the DVR box are active simultaneously, so you can connect a VCR to either the RF output, or composite Video or S-VHS video and the audio outputs and record from those outputs.
    The external drive will NOT allow you to move content. It is permanently  paired with the DVR it is connected to, so the only thing you can do with the external HDD after you change DVR's is re-format the HDD. This is a sore subject..
    Before sending back the original DVR, make sure that the new one solves the problem(s). Verizon uses the 'shot gun' approach to trouble shooting, and will try just about anything and everything on your end before considering the possibility that the problem is on their end. In short changing out the DVR may not fix the problem.

  • Is there a way to save a form, once filled out, as a different file type in Reader?

    I have Acrobat, my coworkers only have Reader. Company won't purchase Acrobat for the other employees.
    I built a form for my coworkers to fill out. We need them to be able to send the filled out form to clients, but we don't want the clients to be able to edit the forms.
    I understand people with only Reader can't flatten the document, or add a password, or save it as non editable. As I understand it, even with Acrobat I can't assign a password for Reader users to be able to edit or not edit a file (PLEASE correct me if I'm wrong on that one).
    Is there any way to save the PDF form once it's been filled out (in Reader) as a different file type? Even an image? The file we send to clients doesn't have to be a PDF. Just something that most people can open.
    I tried inserting the PDF into a word document (unreadably pixelated) and tried taking a snapshot of the entire page (resolution too low). I've tried downloading one of the free PDF writers and it apparently won't work with our network security (or something along those lines). I've tried using the pdf writer for Firefox on the form once it was filled out, and that won't work either because our network firewall seems to be blocking it and that's not something they are willing to take down.
    Any advice?

    The signature WILL work! I've just looked into it more, thank you so much for pointing me in that direction.
    I get it now, it locks the form fields in place after my coworker fills them in and signs it (as the very last step).
    I wish I would have asked on here a full day ago. Would have saved a lot of headache and Googling.
    Thanks again.

  • Is there a way to save the last curor position in Numbers?

    Is there a way to save the last curor position in Numbers? We have a custom Budget spreadsheet but every time we open the file, we have to scoll to the bottom of the spreadsheet.
    There are several thousand entries, and every time we open it, we have to scroll to the bottom of the screen which is getting fairly annoying.
    Every time we open it, regardless of what sheet or cell we are in when it is saved previously, it opens at the top....
    Any suggestions?
    Thanks!

    reverse the order of you entries and add rows at the top of the table.  That is have newest date entries at the top and oldest at the bottom

  • Is there a way to save a fillable form (in Reader) as a static (uneditiable) image and send it for signature without the recipient being able to revise the fields at all?

    Is there a way to save a fillable form (in Reader) as a static (uneditiable) image and send it for signature without the recipient being able to revise the fields at all? I have designed a number of fillable forms and sent them to our clients as Reader extended pdfs to be filled out and sent back. Now, certain clients want to be able to fill in the fields and save the doc as a pdf that can't be tampered with so that they can send it to their own people for signature to be returned to them hand-signed and scanned via email.
    Since the forms have been secured, and my cleints are only using the free Acrobat Reader, how can they save the filled in form as a static pdf to send on for signature? They do not want to have to print, scan and email. Is there an app, plug-in, simple solution to this?
    Thank you,
    Rumor

    The signature WILL work! I've just looked into it more, thank you so much for pointing me in that direction.
    I get it now, it locks the form fields in place after my coworker fills them in and signs it (as the very last step).
    I wish I would have asked on here a full day ago. Would have saved a lot of headache and Googling.
    Thanks again.

  • Is there a capability to save/export the time capsule settings file when using the iphone/ipad airport utility. the "file" button does not exist on the latest airport utility app.

    is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.

    the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
    Sounds like you are a bit confused with version numbers.
    Latest AirPort Utility version for the iPhone / iPad is 1.3.3.  There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
    AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x.

Maybe you are looking for