There is no print button/icon in the customize pane. Where is it?

I cannot find the print button. It is not under the "three line" button, nor in the customize pane, whether I open customize via that button or by right clicking on the toolbar. I have tried installing Print/Print Preview (0.9), but can't see that either.

Why are they trying to reinvent the wheel? I want a full time Menu Bar with a Standard Print Button that everyone is use to. I want to be able to click on the Print Button and the results is same as "Ctrl P"

Similar Messages

  • I cannot print a shipping label pdf file - there is no print button, and when I choose print preview, the page is blank

    I used to be able to print shipping labels from Amazon.com. The label image is a pdf, but on the pdf page there is no print button. When I go to file print preview in the main tool bar, the image shows the file name, but no shipping label.

    You can't delete pages with Reader, only with Acrobat.

  • How do I download tv shows on iPod? Ios7. They are there. A little cloud icon in the bottom right corner. But unlike an iPad, there is no option (cloud with a downward facing arrow) to download.

    How do I download tv shows on iPod? Ios7. They are there. A little cloud icon in the bottom right corner. But unlike an iPad, there is no option (cloud with a downward facing arrow) to download.

    If they have 'open' next to them then that implies that they are already on your iPad - if you tap on the 'open' button does that open the app ? If it does then they are on your iPad. You've checked all your homescreens and tried a soft-reset to see if they show after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I want to reset my ipad 2 but in the settings menu/general there is no reset button. this is the only way to restore factory settings from what i can see on internet. can anyone help?

    i want to reset my ipad 2 but in the settings menu/general there is no reset button. this is the only way to restore factory settings from what i can see on internet. can anyone help?

    You can restore the device within iTunes on your computer. This article will describe the process for you.
    http://support.apple.com/kb/ht1414
    On the iPad - Settings>General>Reset>Erase all content and settings

  • Iphoto gives message "no images were selected" when hit print button.  Yet the the images are clearly selected in the print window.  I've printed hundreds of images without a problem before.  Iphoto 6.0.6, MAC 10.5.8

    Iphoto gives message "no images were selected" when hit print button.  Yet the the images are clearly selected in the print window.  I've printed hundreds of images without a problem before.  Iphoto 6.0.6, MAC 10.5.8, Suggestions?

    I have recently started having this problem in PSE8. The Adobe workaround
    did work, but I don't fancy having to re register each time I use it.
    What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
    It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
    If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
    Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
    Hope this helps

  • After uploading to the cloud, i lost access to some of my songs. The library still shows the information and there is a cloud download icon but the font color would seem to indicate it has been deactivated (i.e. nothing happens when I click on it).

    After uploading to the cloud, i lost access to some of my songs. The library still shows the information and there is a cloud download icon but the font color would seem to indicate it has been deactivated (i.e. nothing happens when I click on it).

    Problem closed (although not resolved).  After working with Apple support, no resolution was found.  I asked for a refund of the iTunes match purchase price, which was granted.  Interestingly the support tech, who was very nice if not particularly helpful from a technical point of view, spun the "resolution" of refunding my iTunes match purchase price as a positive one, here is a quote from the final email
    "I'm glad to hear that you're not having issues with the songs you've purchased.  Nothing makes Apple happier than to hear that our customers concerns have been rectified."
    It is notable that I never had an issue downloading music directly purchased thru the iTunes store, the only issue that existed was downloading songs that I ripped from my CD collection and "matched". 
    I'm happy that I received my money back, however I wish that the iTunes Match service worked for me (I was looking forward to this service).  I'm most upset at the time I wasted trying to fix this problem.
    I'll now download music the old fashioned way: syncing with iTunes directly.

  • Noticed a pretty obvious bug in 5.0 ctrl+shift+d will bookmark all sites open but there is NO reference in any of the file menus, where is it located if you didn't know the shortcut from a previous version?

    Noticed a pretty obvious bug in 5.0 ctrl+shift+d will bookmark all sites open but there is NO reference in any of the file menus, where is it located if you didn't know the shortcut from a previous version?

    Right-click '''on''' tab to see that menu item.

  • Icon in the JTABBED PANE

    hello...
    How can I put an Icon into the JTABBED PANE?
    So every TAB will have its own Icon?
    I believe JBuilder 4.0 do that.
    Thank you.

    Read http://java.sun.com/docs/books/tutorial/uiswing/components/tabbedpane.html
    tabbedPane.addTab("Title", image, panel, "Tooltip");

  • Is there a keyboard shortcut to move from the bookmark pane to the PDF pane?

    I create a lot of bookmarks for easy referencing. Creating a bookmark is easy, with the press of Ctrl+B.  But once you are in the bookmark pane and done with it, there doesn't seem to be a keyboard shortcut to come back to the PDF pane. I always have to resort to the  mouse. If I can perform the entire workflow - create bookmark, edit bookmark name in the bookmark pane and come back to the main PDF pane - without lifing my fingers off the keyboard, it will really save a lot of time.
    Is there a keyboard shortcut to move from the bookmark pane to the PDF pane?

    I was not able to do it with the keyboard... You can make a feature request here:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • OpenDocument Printer button open always the PDF Export

    Hello
    I am using a COM object to pilot the generation of Crystal Reports from Crystal Server using the OpenDocument Viewer.
    From the COM Object I open a new Internet Explorer window with the URL of the report to open and everything is working fine: the viewer is opened, the report generated and displayed on the screen.
    There is only one problem: when I push the Print Button, the Viewer insists to open an Export to PDF window, and I must generate a intermediary PDF file before printing (see picture).
    On the other hand, when I use the View Report from CMC, I get the proper Print dialog box, with all printers and options displayed correctly in the viewer.
    It seems that the OpenDocument viewer is unable to open the Print Dialog correctly and it just proposes me to export before printing, while the direct call to the report from CMC is working as expected.
    I would like to know if this is the normal implementation (so no possibility to open the Print dialog from OpenDocument) or I am missing something.
    Please note that I have done the following:
    1) Setup the correct Printer Option in the Report
    2) Changed the Crystal Reports in CMC -> Preferences -> Crystal Reports and tried all (Web, Web ActiveX, Web Java). None of the settings seems to impact OpenDocument viewer, but they are taken into consideration if I view the report via CMC
    3) Added a couple of fake printers in Crystal Reports Printer List (Application->Crystal Reports Configuration -> Printer List) with no success.
    Any information you can provide me would be greatly appreciated.
    Best regards

    Hello Ludek
    thank you for the hint on the viewer.
    I have seen in some post where it is explained how to change a property in the viewer. In this specific case I do not manage directly a viewer object in the code. I just write down the url in a Internet Explorer process that open the viewer using mainly REST API, something like:
    http://MYSERVER:8080/BOE/OpenDocument/1407242304/CrystalReports/viewrpt.cwr?id=10277
    So unless I can specify the PrintMode via a URL parameter, I cannot interact directly with the Viewer. The COM object is a piece of software that is executed on the user workstation that uses REST API to communicate the commands to the central Crystal Server. I have for example implemented a method to browse the repository using REST and then parsing the resulted XML in the COM object, by creating a local representation of the folders.
    In this way my COM object is like a proxy from a local application and Crystal Server.
    Regards
    Angelo

  • There is no printer output when using the PrintOut method

    I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
    Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
    And when the output is directed to the screen, we can see the report.
    Could someone give me an idea of what is the problem?
    Thanks,
    Isis
    SP - Brazil
    The code used is below:
                       Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
                       rpt.FormulaSyntax = crCrystalSyntaxFormula
                       rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
                       rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
                       rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
                       ' ... Some lines to compose the selection formula
                       rpt.RecordSelectionFormula = Cond
                       ' To evaluate the image length:
                       Arq = rsTMP3!FT_Arquivo
                       ImageScaling = FatorDeReducao(Arq, "F")
                       ' To reduce the image length:
                       AchouOLE = False
                       For Each oSection In rpt.Sections
                           For Each oObject In oSection.ReportObjects
                               If oObject.Name = "PictureFoto" Then
                                  Set oOleObject = oObject
                                  AchouOLE = True
                                  Exit For
                               End If
                           Next oObject
                           If AchouOLE Then Exit For
                       Next oSection
                       With oOleObject
                            .Suppress = True
                            .XScaling = ImageScaling    ' 0.5 = 50%, 1 = 100%
                            .YScaling = ImageScaling
                            .Suppress = False
                       End With
                       Aguarde.Show 1
                       If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
                          rpt.PrintOut True              ' <<<---- Here using true or false nothing happens
                       Else
                          PrintRPTtela rpt, "Fotos"   ' <<<--- Here it works fine
                       End If

    Hi Isis,
    Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
    https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
    You'll find the distribution files for your app also from that same download area.
    If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
    Thank you
    Don

  • How to make the push buttons Iconic in the web

    hai Folks,
    I deploying my form on the web but I am unable to view the
    buttons which are made iconic. I used the gif files as iconic,
    but I dont get the icon in the button when i deploy on the web.
    Please help me out...
    Thanks
    Jayakumar
    null

    You need to set the virtaul path of the directory that
    containsthe gif filles in the listener configuration
    example n:\myapps\gif\ /web_gifs/
    then in the registry of the application server
    for FORMS50_PATH add n:\myapps\gif
    Hope this helps,
    Sunder
    Jayakumar (guest) wrote:
    : hai Folks,
    : I deploying my form on the web but I am unable to view the
    : buttons which are made iconic. I used the gif files as iconic,
    : but I dont get the icon in the button when i deploy on the web.
    : Please help me out...
    : Thanks
    : Jayakumar
    null

  • There is no aurora button,just like the orange one in firefox

    Yesterday I installed Aurora ( 29.0a2).I saw in the pictures here ( https://blog.mozilla.org/futurereleases/2012/03/19/the-latest-firefox-aurora-is-now-available-for-download-and-testing/ ) that there is an "Aurora" button just like in firefox.In my browser there is no such button.What should I do to get it?

    Current Nightly and Aurora builds have the Australis interface that looks different than the user interface in the current Firefox releases.
    *http://www.mozilla.org/en-US/firefox/29.0a2/auroranotes/
    *http://www.ghacks.net/2014/01/31/mozilla-decides-uplift-australis-firefox-aurora/
    You can install the Classic Theme Restorer extension to restore some lost functionality.
    *https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  • Why is there a NEW WINDOW icon but no NEW TAB icon on the Customize Toolbars function?

    In Firefox 4 I can customize the menu bar only with icons that are included in the customization routine. Included is a NEW WINDOW icon but no NEW TAB icon. Why?

    The + New Tab button on the tab bar should move to the right end side of the Tab bar if you open Customize. If the + button disappears then click the Restore Default Set in the customize window.
    See also:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • I click add on file sharing on iTunes but there is not a button to copy the files in the selection menu

    IT doesn't let me drag them to the iTunes page either

    What happens if you try to open https://mail.google.com/ ? Do you get a "page not found" error, or a security certificate error, etc.?
    Firefox has a "3-bar" menu similar to Google Chrome, and you should find Options there, but if you have instructions for the Chrome settings page, they aren't going to match Firefox's Options dialog...

Maybe you are looking for

  • How can I place my initials when in a document shared review?

    When in a document shared review envitronemnt, the Sign Document menu is grayed out, I want to be able to place my initials in a document, what are my options?

  • Please I need help in java oracle.apps.per.DataInstall

    Hi all Please can any body help me , when I try to run datainstall to prepare add hrglobal patch by using this command: java oracle.apps.per.DataInstall thin hostname:dbport:oraclesid but I got this error : Data Install java.sql.SQLException: Io exce

  • Variables order problem in WAD?

    Actually I am using 5 queires in the template. In first query President,Group,Cycle,Fiscyer ,Date is the order and it is appearing in my Bex properly. In next all the queries President,Fiscyer,Date is the order.This is appearing corrctly in my Bex. B

  • RMI from C written process to Java process?

    I have a program with a DLL specification so you can write your own code and have it linked into the programs process. However, I have a lot of code already written in Java that I'd like to have executed. And, I don't want to re-write all that Java c

  • Outline Stroke Problem

    I am trying to outline the stroke of a custom brush line. When I go to Object>Path>Outline Stroke instead of keeping the same appearance and simply outlining the stroke into a filled shape, the stroke transforms to a very thin hairline. Any ideas?