There is no SIM card installed after IOS update on 3GS

Hey!
I just upgraded my iPhone 3GS to iOS 5. All went well, then at the end, it asks me a few set ups (like language, Location, and WiFi settings).
After that, it attempts to activate, and fails, giving me the following error in iTunes: "There is no SIM card installed in the iPhone you are attempting to activate."
Problem is, there IS a SIM card in the phone, I tried taking it out, and putting it back in, tried with another SIM, tried the SIM in another phone, worked fine, just not the iPhone!
I would appreciate any help!
Also, the phone was Jailbroken before, and the SIM worked fine. Just not now, when it tries to activate.
IS IT POSSIBLE TO GO BACK TO THE BEST PREVIOUS UPDATE OF IOS4. THAT"S ALL I EXPECT NOW!

@wendy191,
Have you jailbroken your phone before?
If you have, I don't see any way you could go back to IOS4 (4.3.3 or 4.3.5) (However, experts might be able to help you)
When you jailbreak you iPhone you update your baseband to iPad's Baseband i.e. 6.50 (something like that) & once that happens there's no going back (at least a legitimate way) unless you do what this guy says.
http://www.youtube.com/watch?v=aNK_ZXqF6r0
Watch this video on youtube. Listen to what he says & you can surely get through the activation.

Similar Messages

  • HT4623 how to fix my iphone 3gs after ios 6  ?there is no sim card install in the iphone you ar attempting to activate

    how to fix my iphone 3gs after ios 6  ?there is no sim card install in the iphone you ar attempting to activate

    Hello James,
    Thank you for the details of the issue you are experiencing with your iPhone.  I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT3743 How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" Kindly suggest

    How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest

    It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
    If that is the case, it is nowpermanently bricked.

  • TS3694 How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" Kindly suggest

    How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest

    tariqrehmani wrote:
    How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
    The iPhone 3G is Not Compatible with iOS 6...
    It also appears that your phone may have been Hacked and / or Jailbroken...
    If this is the case... you are out of luck... Because...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    Why Jailbreak is Not Supported  >  http://support.apple.com/kb/HT3743

  • Never-hacked 4 gets "There is no SIM card installed in the iPhone" after update to 7.0.2

    I was using iOS 7.0.1 an hour ago.  Upon update to 7.0.2 I get "There is no SIM card installed in the iPhone you are attempting to activate." 
    I know I haven't a SIM.  I threw it away.  I moved on.  New carrier - HTC phone.  I've been using my iPone 4 as an iPod without the SIM for over half a year.  Before that I did the same with my iPhone 3 for much longer. 
    What hoops do I have to jump through now to recover my iPhone 4? 
    The phone has never been jailbroken or altered. 
    ATT was my original sevrice provider while I bought my device from Apple. 

    All iPhones require activation after a restoration and an iOS upgrade.  There really was no reason to throw your deactivated SIM  from AT&T away.  You'll need an AT&T sim to activate that phone.  It doesn't need to be active, however.  Borrow one from someone to get your phone activated

  • HT4623 trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after

    trying to active my old iPhone 3gs. it showing that activation server is temporary unavailable and on the iTunes showing that there is no sim card installed in the iPhone you are attempting to activate. I unlocked my phone then i upgrade it, after that this happen. i tried with other sim same message come again and again.if any body know solution let me know. thanks

    Was the SIM card activated on another phone? I assume this is an ATT style trying to use on T-Mobile? Was the SIM installed correctly? Is the carrier (like T-Mobile) operating IOS 6 devices yet?
    If the SIM is a valid SIM from say T-Mobile, you may want to contact them for assistance activating the SIM card.
    Activation and SIM issues typically point to the carrier. And if this was a CDMA phone say working with verizon, it will NOT work for ATT or T-Mobile as they use different electronics on the 3GS. The SIM slot is for international use only.

  • There is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)

    Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
    BTW Thank you,

  • I have iphone 4s after update ios7 "There is no SIM card installed"

    i have iphone 4s after update ios7 "There is no SIM card installed" i purchased from austuralia but now i am in egypt and i made the update here but the result my iphone not working now with any sim card
    what can i do?

    Maybe the SIM card is faulty one has not bee inserted correctly.  Take the sim out and reinsert it.  Try a different sim.  Maybe the phone was hacked to unlock it from the original carrier and when you updated it it relocked

  • HT201328 After restore the phone, I can't active it anymore. When connect to iTune error message "There is no SIM card installed in the iPhone you are attempting to activate."

    I've a request to unlock my phone to Telstra and recive info for unlocked.
    After that I restore the phone following the instruction: http://support.apple.com/kb/HT5014.
    I can't active my iPhone anymore. When connect to iTune, I got error message "There is no SIM card installed in the iPhone you are attempting to activate." even my SIM is working well

    Read here:
    http://support.apple.com/kb/ts4148

  • Iphone 3gs no longer will work  after iOs5 update,comes up with message ' there is no sim card installed in the phone. Can anyone help me please. I am working as a volunteer in a remote location in Asia and no where near an Apple shop etc?

    I have tried to  update my 3GS phone and now it longer works as it comes up with message there is no sim card installed in the phone. Can anyone help please as I am no where near technical support as I am working as volunteer in remote Asian country

    Hi Allan,
    Thanks for asking, I knew I had forgotten to mention something. The phone was indeed unofficially unlocked, since there were no apple stores or even premium resellers in the region I lived in during the given procedure had to be done.
    I understand this could be a further complication, especially the fact the home button does not work. However, I was wondering if there would be a possibility to use a third-party application instead of iTunes to restore the iPhone? IF someone does know of such an application, I could easily solve further problems myself. Basically, the main issue here is my lack of ability to enter DFU mode.

  • Failed restore on iPhone 3GS because iTunes says there is no SIM card installed.

    I have an unlocked iPhone3GS that I used in Thailand for 2 years with a Thai SIM card. Now I am back in the USA and I got a AT&T SIM card without a contract. I wanted to update to the newer version of iOS so I contacted AT&T and had them do an authorized iPhone unlock. I backed up my iPhone and then restored it in iTunes. After restarting the phone iTunes told me there was no SIM card installed in the device. I've taken the AT&T SIM card out and put it back in but nothing changes.
    Any help or suggestions?

    The iPhone was jailbroken before I went to Thailand. I never had a contract in Thailand ethier. The phone was working fine on my new AT&T SIM card for 2 weeks until I went to restore and update the iOS.
    I also tried to use WIFI to activate the device instead of iTunes. After a few minutes of trying that a mesage tells me that Apple can't activate it and to try use iTunes or contact Apple support.

  • TS1368 my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes

    my iphone is displaying "there is no sim card installed in the iphone you are attempting to activate" wn i connect it to itunes,bcoz i hv installed ios5.0.1 for my iphone 3g.can you tel me how to solve dis problem?

    I’m having the same issue.
    My phone indeed has no SIM card. I kept the 3GS after upgrading to an iPhone 4 and I was simply using it as an iPod Touch.
    As far as I had been told, I was perfectly OK to do that and it had been going fro update to update without any issue up to now.
    The problem is that iOS 5 requires a new activation, and that this model cannot be activated with a valid SIM. Obivously, I’m not going to take a new line with AT&T ad pay $xxx every month just to be able to activate my previous phone.
    I contacted AT&T but they had no clue how to get out of the problem and said it was in Apple’s hands anyway.
    I tried restoring 4.3.5 on the phone, but so far I haven’t been successful :-\
    I’m open to any suggestion
    Corentin

  • There is no SIM card installed in the iphone you are attemting to activate

    just now i was installed ios 5.0.1 but i canot activate my phone it is showing "There is no SIM card installed in the iphone you are attemting to activate"

    i had a problem just like this and i found out it was the sim, cos its hard not to put your finger on it when putting it in the phone. the way i did it was to put it in the holder on the iphone and then clean it while on there and then put it in after a bit O2 gave me a replacement sim and worked well.
    If this doesn't work well then i would say go to your apple store http://www.apple.com/uk/retail/geniusbar/
    they should be able to run tests on the phone and give you a new one right in the store. if its anything to do with the phone the guys in there will make sure you leave with a working phone, if its down to the sim then they will say go back to O2 and O2 will have to fix the problem cos to apple they would of given you a new iphone.
    Note if they give you a new iphone then you have to make sure you give your insurance details of your new phone to them.

  • ITunes say's there is no sim card installed

    I've had the iphone 3 for a while. I plugged it into the computer to update it, and when I unplugged it from the computer, it restarted. I tried to activate it without itunes, but it tells me to connecting to itunes to activate it. When I plugged it in to itunes, it say's there is no sim card installed. I ejected the phone, took out the sim card, put it back in and plugged it back in. Nothing changed. How do I get it to work again?

    phones which are sim unclocked by jailbrake will be sim relocked when one update the ios version

  • How do I stop my ipad telling me there's no sim card installed?

    Hi,
    I have an iPad mini. I don't keep a SIM card in it (although I could, it's not limited to wifi only) and, in fact, I paid extra to buy the ipad without a contract to a network. Since "upgrading" to the latest ios, my ipad tells me there's "no SIM card installed" every few moments. It's happened 5 times so far, typing this and it's making me want to punch my ipad in the face. Is there any way to turn this off?
    Thanks.

    Yeah, same problem here, same sentiment!   it sure feels like harassment.  no solution works (even the absurd ones).  makes me regret the update :s

Maybe you are looking for

  • Flash issues - works in one account, not in another.

    Need help with any ideas on solving this issue. I recently installed the latest official release of Flash Player 8. (8,0,24,0) Then for some reason some sites doesn't display Flash content properly in Safari. My homepage for example (http://www.swedi

  • Which is better Kona 3 or Decklink Extreme?

    Currently we are using a Canopus ADVC-700 for analogue to DV conversion. (Really nice unit). We want to get a editing card that will give us hardware acceleration in FCP and also HD capable. We currently process in DVCPRO but will be upgrading to DVC

  • Read profile parameter in ABAP

    How could I read out a profile parameter such as zcsa/installed_languages in ABAP? Is the a function I could use? regards HT

  • How do I connect my two macs

    I have a PowerBook G4 and I want to access it from my new MacBook Pro. How do I go about doing that?

  • Message Sequence in BDC

    Hi, Can anyone please tell me in what sequence will the messages be filled in the Messages Internal Table(i_messtab), after the statement   CALL TRANSACTION c_tcode_cl20 USING i_bdcdata                     MODE c_mode_n                     UPDATE c_u