There is no sound coming out of my iPad. If I plug in and external speaker it works. How do I get the sound to work? I must have turned something off?

I have no sound coming from my iPad unless I plug in external speakers. How can I get sound again. Thanks

If you lose sound for keyboard clicks, games or other apps, email and other notifications, system sounds have probably been muted.
System sounds can be muted and controlled in two different ways: either by the side switch (located next to the volume up/down controls) or in the Recent Apps tray. The initial default is via the side switch.
Check the status of Settings > General > Use Side Switch to:. If this is set to Mute, the switch on the side of the iPad will mute system sounds.
If this is set to Lock rotation then the mute system sounds control is in the Recent Apps tray. Double tap the home button and, in the tray which appears at the bottom, swipe all the way to the right. The speaker icon is on the left. Is it is crossed-out tap on it and mute will be turned off and system sounds will be turned ON.
This Apple Support article explains in more detail how the side switch works.
http://support.apple.com/kb/HT4085

Similar Messages

  • How do I get the sound to come out of external speakers?

    How do I get the sound to come out of external speakers?

    Thanks for our reply.  My speakers are powered Bose speakers but still didn't pick up the sound until I tried this suggestion from another discussion thread.  This worked like a charm:
    Re: External speakers don't work created by ally100 in MacBook Pro -View the full discussion
    I had a similar problem a while back. The issue was with the speaker jack plug and the macbook phone socket. For some reason the jack plug was not a good a fit, as say the jack that comes with the iphone ear phones. A few tiwsts and turns of the speaker jack plug and it eventually became a snug(ish) fit. Have a look on you tune. There are a couple of videos on there that might help if this is not the issue. 

  • I no longer have sound for either my audio books or my music on itunes.  I've tried everything--restarting, updating, re-installing audible app, and restoring the iphone to its factory settings--nothing helps.  How do I get the sound back?

    How do I get the sound back on my iPhone 4?  I've tried all the fixes such as restarting iPhone, reinstalling the audible app, and finally yesterday, I restored the phone to its factory settings.  I still get no sound from music on iTunes or from my audible books.  The phone still rings (I have sound for that) and the voice control speaks to me, and when I'm typing, the automatic text voice speaks so I can hear it but nothing else works. 

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • My HTC One received a software update yesterday, and it wiped out most of the theme and live wallpaper options. How do I get the previous options back?

    My HTC One received a software update yesterday, and it wiped out most of the theme and live wallpaper options. How do I get the previous options back?

    This was NOT an update, rather a downgrade... the font size in text messages is now smaller and difficult to read. I have tried changing font size in settings and it does not apply to text messages. The lock/unlock screen pattern now reminds me of drawing a stick figure. My vehicle is now having problems with Bluetooth importation of my phone book--I keep receiving an on screen error message as it tries to continuously reattempt to import... And yes, the live weather wallpaper i favored is no longer an option... Why?

  • How do i get the sound to turn back onto my macbook? There's an unremovable headphone jack stuck inside the jack hole

    A piece of a headphone jack broke off inside my macbook, and i am unable to remove it.  Since it is still in the laptop, my laptop is unable to play music from the internal speakers, is there anyway i can override this and get the speakers to work without removing the jack?

    Get a USB headset or a USB to headphone jack adapter.

  • How do y get the sound to work.

    How do I get my sound to work.

    I assume you have an iPad.
    It would help if you give some information in your profile or your post about equipment, operating systemversion and so on.
    If you are new to iPad:
    Go to Settings, choose the "general" line in the left panel, then you will see the "Use side switch to:" possibilities.
    Check the side Switch position.
    Underneath the General is the Sounds settings, iy look there look at the most upper setting at the right.
    Happy new year.

  • How can I get the sounds , like clicking,etc to work on iPad 2 with IOS 5. In the settings all sounds are on and the volume is high but I don't get a sound.

    After downloading IOS 5, I no longer get the sounds on my IPAD 2 to work. They are on in settings and the volume is at maximum, but the sounds such as keyboard click, email sent etc, donor work.
    Any suggestions.
    Regards

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • How do you get the sound to play on the tv from your macbook

    I connected my macbook to my tv using a HDMI cord. I'm trying to watch netflix but the sound plays from my macbook. How do you get the music to play from the tv instead.

    The adapter to HDMI doesn't carry sound from a MacBook earlier than the Mid 2010 models and most TVs don't have separate RCA input plugs for audio with the HDMI inputs since they expect the sound to be carried by the HDMI plug. With HDMI you'll need to use external speakers or headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs for audio with the HDMI plug.

  • How do I get the sound to work?

    I can't get the sound to work on my Mac, even after going into System Preferences. It is brand new so this is very disappointing. Can anyone help?

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to i get the speakers to work on my monitor the sounds comes out of my hard drive

    I have a large monitor on my desk and the sound does not come out of the speakers on the monitor the sound comes out of the mini hard drive- how do I fix that to get it to work out of the monitor

    If it's an Apple monitor, make sure its USB cable is plugged into the Mac, and select it in the "Output" tab of "Sound" system preference.

  • How do I get the sound to work on my macbook pro?

    All of a sudden the sound has stopped working on my macbook pro. It only works when I plug in speakers or headphones. I've been into system preferences and nothing worked. The sound icon at the top right of my screen is greyed out... anyone help with how to get it working again?

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964

  • I installed windows 7 on my imac and the sound doesn't work. How do i get the sound working?

    The sound of windows 7 on my imac doesn't work. How do i fix it?

    For me, downloading and installing drivers from Realtek worked:
    http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
    choose:
    Vista, Windows7, Windows8 Driver (32/64bits) Driver only (Executable file)
    Worked like a charm.

  • The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings.   How do I get the sound back?

    The sound effects volume is all the way down.  It pops up for a second once in awhile and then disappears. I can't find it in the Setting.  Music sound plays fine, but no sound on my apps.  Any idea how to fix it?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How do I get the sound to go to an external audio system?

    I am having trouvle getting my sound to go to external audio system from Logic Pro?

    You need to put in a bit more information about what you're trying to do, and what sort of equipment you're using.
    Are you using some sort of audio interface?  If so, is the driver installed, and is it selected as the Output Device under Preferences/Audio/Devices?  Then check under Preferences/Audio/Output, that you've got the desired output selected for your audio interface.
    If you're not using an interface, then you want to select "Built In Output" under Devices, and you should be able to run a cable from the headphone jack to your external audio system.
    Dave

  • I inserted my CD into the external player incorrectly.  How do I get the disc out?

    I inserted a CD into my external player incorrectly into my MacBook Air and can't get the disc out.  What do I do?

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Maybe you are looking for

  • Problem in invoking a BPEL process with complex input

    Hi, I have an asynchronous BPEL process which has a complex request schema. When I try to invoke the process through BPEL Console, it works properly. But when invoking it through Java API, it seems that the input soap message is not well received by

  • I need to highlight selected text in a pdf document

    I need to highlight selected text in a pdf document

  • How to calculate variance in process order?

    hi i hav standard report ME1P,  i need to do some modifications in this standard prgrm i did all modifications except variance calculation... can any one expln me the logic of below code? IF xeipa-lprei IS INITIAL.       IF xeipa-peinh NE 0.        

  • How to redefine function in nsLoginManager.js inside omni.jar

    I would like to redefine a function. I find the definition inside omni.jar in the file nsLoginManager.js. If I rename omni.jar to omni.zip, I can see the contents, but if I try to drag an updated nsLoginManager.js to the archive, Windows 7 complains

  • Capture - does this actually work?

    Using the app Capture, what is supposed to happen as only once has anything come up to give me the option of saving etc?  I do wish there was a Yosemite user guide out there Many thanks Paul