There is no sound on headphone output [SOLVED]

As tittle says:
Sound works good , but when i plug my headphones there is no sound.
I have tryed alsamixer control also in gnome without success.
I have been reading the alsa documentation ....
here is my aplay -l out:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: VT1802 Digital [VT1802 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
Something missing ?? sound on my headphones worked once , then it sudenly stop working,
Where to look ??
Please any help will be wellcomed.
Last edited by leostereo (2013-06-18 21:01:03)

Here is my output:
[root@arch ~]# amixer
Simple mixer control 'Master',0
Capabilities: pvolume pswitch pswitch-joined
Playback channels: Front Left - Front Right
Limits: Playback 0 - 65536
Mono:
Front Left: Playback 59513 [91%] [on]
Front Right: Playback 59513 [91%] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch cswitch-joined
Capture channels: Front Left - Front Right
Limits: Capture 0 - 65536
Front Left: Capture 43609 [67%] [on]
Front Right: Capture 43609 [67%] [on]

Similar Messages

N8 - Buzz sound on headphones output

Hi!
I have an N8-00 and I love listening to music from it. I often have it plugged in to my KRK studio monitors with an RCA cable.
For some reason when there is no sound coming from the phone (whether its music or a ringtone or anything) there's a terrible buzz sound on the speakers.
Can anyone please help with a solution?
Regards
NoddyN8

Hi!
I have an N8-00 and I love listening to music from it. I often have it plugged in to my KRK studio monitors with an RCA cable.
For some reason when there is no sound coming from the phone (whether its music or a ringtone or anything) there's a terrible buzz sound on the speakers.
Can anyone please help with a solution?
Regards
NoddyN8

Audigy 2 plat- cannot get sound from headphone output, only from rear pa

I hjave installed the card but have not been able to get output from the headphone jack omn front panel. everything else works fine.

Inertia22 wrote:
I put in the Audigy 2 zs from my old PC into my new one and I cant get any sound from the Headphones or Mic.
Only sound from the external speakers. Any help would be greatly appreciated.
If you getting sound from the external speakers....are we talking the ones on the laptop?
Means you still have the onboard sound turned on at a guess.

FAQ: Why is there no audio (sound) in my output file?

(For a video version of this frequently asked question and answer, play this video.)
Make sure that the Audio Output option is checked in your output module settings.

For me, I can't think of a common use-case where that would be necessary. I suppose there are times when you want a file to conform to an existing structure, such as when you want to replace media in Premiere, and the new file needs to have the same number of audio tracks as the old file (which you may not have created). Even though that hardly ever happens (I remember replacing proxies when CS3 got the ability to import P2 footage... it was... not very cooperative), I wouldn't want to lose the ability to arbitrarily export an empty audio track, because I'm sure there are other edge cases which I can't think of. But, I wouldn't mind losing it as a default behavior.
It sounds like what you're hinting at is a feature where the render module detects whether there is any audio in the comp before committing to some kind of default audio track export setting. If there is no audio in the comp (or if all the audio in a comp is disabled), it wouldn't export an audio track.
As long as there is a setting to override this behavior (i.e.: enabled / if detected / disabled) that can be built into an export preset, I'd love such a feature.
I, too, often forget to turn on audio export, because most of my comps don't use audio (I sync audio in Premiere, usually) and I don't like having empty audio tracks I don't need. But in the rare cases I do need audio, it's really annoying to go back and re-export the audio because I forgot to turn it on (similar to forgetting to enable an alpha channel, which makes me feel really stupid).

No sound thru headphones

*I just replaced the battery in my video Ipod with success; now there is no sound thru headphones. All menus are operating and display shows music/movie playing correctly just no sound. I get sound thru the computer and my docking station. Any ideas?*

Presumably you opened up the case and did this yourself. Perhaps a connection from the circuit board to the headphone socket has broken off/become disconnected when you did this.
If you have opened the case yourself, I suggest you open it again and see if all the connections to the headphone socket are good. I've not done this on an iPod, so I don't know exactly what it will look like. It's probably a small plug at the board end and then soldered on at the socket.
Good luck.

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

HT4085 I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please he

I has a problem and I am not able to solve that when I use sound effect it is showed only headphone even I did not installing the headphone I has a problem and I am not able to solve that I am. Not able to hear the sound without headphone please help guys

Sounds to me like a hardware issue or maybe something is stuck in the headphone jack. When you plug in headphones, the jack in the iPad is switched to play only through the headphones and not the iPad's speakers. Sounds like either the jack is faulty or there is something stuck in the headphone jack. Get a flashlight & look inside the jack for anything that looks like it doesn't belong in there.
Regardless, I'd take it in to an Apple Store if you have one nearby to have it checked.
EDIT: "Ocean20" had an excellent suggestion above. While doing that, you may also want to rotate/twist the plug in the jack back & forth a few times as well. Dirty contacts can often times be cleared by doing this.

Audio icon in upper right menu disappears and there is no sound Went to Apple preferences which says there is no output device. I can't figure out what to do. Help!

There is a sound icon in the upper right menu which disappears and reappears. When it disappears there is no sound. Went to Apple preferences for sound preferences. When the sound icon is off, this page is not active. Says "mute" is activated and that there is no output device. Cannot fix this problem. How do I retrieve the sound icon and get sound back?

Hi Ronnie, anything in particular going on when this happens?
Long shot, but...
Next time it happens... Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

TS1425 My iPod Classic was working fine all day. Came home and uploaded to voice memos via iTunes, now there is no sound coming from my iPod. I've used both headphones and a docking station. The songs don't even begin, they just skip to the next one.

My iPod Classic was working fine all day. Came home and uploaded 2 files via iTunes, now there is no sound coming from my iPod. I've tried both headphones and a docking station......nothing. The songs don't even engage, they skip to the next one. I've tried rebooting the iPod and still nothing. Any ideas?
Kim

Hi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in

My iPhone 5s has stopped playing music out of the speakers. It works when I plug in my headphones but other than that there's no sound. It just randomly happened so I'm not sure if I can fix it or if I need to bring my phone in. Help?

Hi Cassilecompte,
If you are not getting any sound from your iPhone’s speaker, you may want to troubleshoot using the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for using Apple Support Communities.
Best,
Brett L

There is no sound in my ipad 3 , It works only with my headphone

There is no sound on my ipad 3 , It works only with my headphone. I will try everything reboot several times .

Are you turning up the volume after you take the headphones out? The iPad will remember two different volume settings, one with headphones and one without.

No sound in speakerphones, but there is one in the headphones.

no sound in speakerphones, but there is one in the headphones. While changing the Vol for headphones - the sound in speakerphone gets alive!
tried to reinstall IDT HD audio drivers. doesn't help.
HP 625 Notebook, win7-32

Is the external drive formatted as Mac OS Extended (Journaled)? Formats such as FAT32 and NTFS will not work properly (if at all) with iMovie. Also, external FireWire drives generally work more efficiently than USB drives when editing in iMovie.
If the drive is not formatted correctly, you will have to backup the files elsewhere, then reformat using Disk Utility.
To check the format, in Finder right-click (or control-click) on the name of the drive (left hand column) and select Get Info. In the panel that opens you will see the format.
Of course, formatting may not be the problem, given that you can at least see the video in the Event, plus get sound and video in the Project (which may be on your internal drive). But worth checking!
John

After installing Mountain Lion. Under sound, where it says select an output device, it say no output devices found and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

After installing Mountain Lion. No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.

Try resetting the PRAM and SMC...
PRAM Reset:
http://support.apple.com/kb/HT1379
SMC Reset:
http://support.apple.com/kb/HT3964
Hope this helps!

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.

this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

HT1338 If there is no sound/music playing, computer starts to make white noise. After sound/music starts, computer pops speakers/headphones. How can I fix this?

If there is no sound/music playing, computer starts to make white noise (unless muted). After sound/music starts, computer pops speakers/headphones (white noise stops). How can I fix this?

Hello Stacey,
What all devices do you have connected?
It sounds like a Ground loop... voltage leaking somewhere.

There is no sound on headphone output [SOLVED]

Similar Messages

Maybe you are looking for