There is no way to increase dpi in Paint ! in Windows 7

There is no way to increase dpi in Paint ! Windows 7
The default is 96%

One big problem is that when you resave a .gif Paint resamples the colors and makes a mess of it whereas in the past it used to work quite well.
Microsoft have made a mess of Paint in Windows 7 and should fix it up to be at least as reliable as Paint in Vista and XP.
I can live with the Ribbon and do like some of the new tools but technically it is less superior to its predecessor?

Similar Messages

At work we have many who travel with train alot, where the internet is very unstable at best. And they have trouble getting their e-mails. So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependence of internet.

At work we have many who travel with train alot, where the internet is very unstable at best. And they have trouble getting their e-mails.
So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependency of a very poor internet connection.

I don't think so. Unless it's in the settings, there's not much that can be done.
are they using wifi on the train? If so, maybe switching to cellular. There are devices like the Mifi, which is a battery operated portable wifi hotspot that they can connect their device to.
If the wifi on the train is solid, I know I've had issues using certain hotspots. For example, my yahoo mail simply will not pull down via the mail app if I'm on some AT&T hot spots. But if I go in via safari then it works. So if the signal is good, maybe using a different way can help.
Or maybe looking for a mail interface that isn't apple's. There are others in the app store that may have better function or more control.

I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

I have adjusted the settings to max and the volume button on the side to max, is there any other way to increase ringtone volume?

you can connect an amplifier to the 3.5mm minijack but it will require batteries or AC power to amplify of cause

Is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file

is there an easier way to transfer your iTunes library on windows to a mac than copying the library to a usb and plugging the usb into the mac and put the library in the iTunes file? I recently swapped to Mac and this is how i moved the library from windows to mac and library is in tact but is there an easier way? My cousin just imported her cd's again, but it was harder for me as i have an ipod with over 150 apps and i needed to move them. i think it would be helpful if i knew of an easier way so i can help a friend move his. Thanks

The general method of use is to download a script (double-click or right-click and use Download or Save As...) to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist or sometimes the entire library.
tt2

Way to increase DPI setting in aperture like iPhoto?

Hi
There was a way in iPhoto to change the plist file to have it generate a higher res book prior to uploading to Apple - depending on whom you spoke with, this made a minor or major difference. Is anyone aware of something like this for Aperture?

It was only iPhoto 5 that had the plist hack change, iPhoto 6 produces 300dpi books as standard, as does Aperture - there is no need to increase the dpi as you can't increase the printing size through the print services anyway.

Is there a real way to increase the system font size yet?

I got a new Mac Pro (2013 model) to use with my Dell U2711 monitor which has a native screen resolution of 2560x1440. After spending some significant time fighting with cables (HDMI and DVI will not allow for full native resolution due to a Dell issue, only Display Port works), I finally got my screen working at the full native resolution. Since I am going from a previous resolution of 1920x1080, as you can imagine, the text is pretty small.
I am running OS X Mavericks 10.9.1.
I searched the forums for a way to increase the default font size and found a ton of posts, but most posts were older or got the response "Change your screen resolution" which translates to "Drop your resolution to a non-native and clearly inferior mode" or buy some special computer reading glasses. These are not real solutions for me. I do professional photo editing so being able to have a high screen resolution is important. With a great OS I would think there would have to be a way to increase the font size. (Surely if Windows can do it, so can Mac OS). I know I can do it for some individual applications like iTunes, Safari, Chrome, etc. But I can't find a way to increase it for apps that don't have a font size option or for default mac applications like the action bar. Is this an issue that just keeps being ignored or is there a solution yet?
With 4K displays already on the market and 8K ones being shown off at CES, if we can't control the default font size, are the next set of solutions going to be "Go buy a really big magnifying glass"? If the current answer is still that I'm SOL, could we please get some feedback to the product group that this is a real issue and it's only going to get worse with higher res monitors coming. I don't think many people will be happy dropping their 4K displays to 1080 resolution or lower just so they can read the text.

Download and run the free application TinkerTool (not "TinkerTool System"), select the Fonts tab, and change the font sizes.

Is there any way to increase the size of the window buttons (close, minimize, maximize)?

I want to increase the size of the window buttons (close, minimize & maximize) because you have to navigate so precisely using the trackpad to use them...it'd be easier if the buttons were a little bigger. Thanks.

Not possible at the present time. You may make your wishes known to Apple here:
https://www.apple.com/feedback/
Ciao.

Is there a quick way to "fit all" in the arrange window?

Does LP8 have a quick way to fit everything in the arrange window from any magnification level? Something comparable to double-clicking on the magnifying glass in Pro Tools?
For instance, let's say you've made your tracks very tall by control-down-arrowing a bunch of times. Now you want to quickly go back to having every track header showing in the arrange window. At first I thought that the key command "control-option-z" (zoom to fit selection horizontally and vertically) would work if you command-a selected all regions first. That does work horizontally, but if I have a region at the bottom of my track headers, that command does not seem to work vertically. The region at the bottom is still out of view.
One thing I tried was going to the key commands dialogue box and assigning option-2 to "save as zoom 1" and option-3 as "recall zoom 1." But when I start with everything visible in the arrange window, then hit option-2 to save that zoom level, then use the magnifying glass a bunch of times to make everything big, then hit option-3, it does not take me back to the original zoom level that I "saved" as option-2.
If the only way to get back to square one is to start there, then control-option-marquee-select to magnify a few times, then control-option-click on the background the same number of times to get back to where you started, well, OK, I will live with that.
But I am thinking there must be an easy way to "fit everything in window" with just one click, or maybe some kind of key-modified click.
Any advice much appreciated,
Jim

OK, thanks for the advice, Erik. I was hoping not to have to use the zoom sliders or the stretch scrollbars method, since it's not as fast as a one-click or double-click method.
One other possibility I was investigating today was saving a screenshot and then recalling it. The manual says:
Saving and Recalling Screensets
Screensets are numbered from 1 to 99 (using only the 1 to 9 computer keys—the 0 key
is assigned to the Stop command by default).
You don’t need to save screensets with an explicit command. It happens automatically,
as soon as you switch to another screenset. Thus, without any effort, your current
working view is always stored as the current screenset.
To create a screenset:
1 Press a numerical key, say 7.
For two-digit screensets, hold down Control while entering the first digit.
2 Arrange your windows as desired, including changes to zoom settings, relationship of
the Arrange area and editor areas, open or closed Inspector and Media or Lists areas,
and so on.
To recall, or switch between screensets, do one of the following:
m Input the number of the desired screenset (1 to 9).
I thought that had real possibilities. Make the arrange window the size of my whole project to begin with, then save it as, say, screenset 3. Then if I zoom in on a wave form or change the size of everything, just recall screenset 3 to get back. Unfortunately, it apparently constantly keeps track of all your changes, so if you zoom within screenset 3 and then try to recall the screenset 3 that you saved, it just takes you to where you are currently, after all the zooming. I don't understand why Logic thinks that helps you, but that's how it seems to work.
Anyway, I've spent enough time on it. I give up. I guess I will use control-left-arrow, control-right-arrow. Unfortunately, you cannot do them both at the same time, it seems, which would be faster. Oh, well.

Is There a Better Way to Work in the Marker List Window?

Is there a better way to sequentially listen to phrases one-by-one in the Marker List window? What I'm doing is Auto-Marking one single long file to break out 271 bits and save each as their own file. It's WAY faster than copying and pasting bits into new files and "saving as" 217 times.
BUT, after Auto-Marking, I have 300-400 phrases to listen to, deleting the non-keepers as I go, until I'm left with my "keeper" 271 marked phrases. But it's so tedious to move from phrase-to-phase. I have to double-click each one before I can hear it (you can move the cursor with the down-arrow, but it won't actually select the audio). So I have to use the mouse (unless I'm missing something) and double-click each of the hundreds of phrases. Then whenever I delete one (which I'll have to do about a hundred times or more to get rid of bad takes, alternates, etc.), inexplicably the cursor jumps way up the list so you have to scroll back down dozens of files to get to where you were. It took me 35 minutes to do it this last time.
Contrast that with Reaper's audition/preview functionality (which, ironically, AA has also, but only for files already saved into a folder). Once I had all the files saved into a folder, I QC'd all 217 files in Reaper and MAN what a difference! All I had to do was use the "down" arrow to advance to the next file AND have it play automatically (Audition can do the same thing with the "Open File" feature). It literally took me 5 minutes to check all 217 files that way. If AA could add that kind of functionality to the Marker List window, or if I'm just completely missing something (very possible) I would REALLY be happy.
Any ideas?
Thanks again! Happy New Years again!
Ken

Wild Duck,
That doesn't quite do what I need. My end-product is 271 (used to be 116) separate files created from one large file. That large one is made up of WAY more than 271 (the VO actor records different versions of some commands, makes mistakes, etc.).
So I need the ability to listen to each marker, and then be able to delete it if need be.
The Playlist makes this impossible in two ways. It only has 2 options for hearing each marker, and neither option allows me to delete that marker after I've heard it. It either plays them all back-to-back without stopping, or it plays each as you click the "Move Down" button. That last one would be great if showed me which marker was playing! But it doesn't, so there is no way for me to know which marker number I just heard, nor can I delete that marker after I hear it.
Sigh.
Thanks for the tip though:).
Ken

There is no way to play game music in C# Windows Phone 8.1 ?

How can one make a game in C# even with WebView if there is no way to play music (from compressed format like mp3, ogg, wma, etc) ? MediaPlayer doesn't work, as whenever you play sounds on top it gets choppy and stops soon, DirectX is C++ (even with
that I found no code sample to play mp3 or such), XNA is discontinued, and WebView music also doesn't work on many devices I tested also it doesn't loop.

MediaElement
is the way you play music in a Windows Store app.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Is there an easy way to push a registry setting to Windows Mobile6 with ZfH?

I mean short of buying the MS development suite and building cab files?
Thanks.

Patrick,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Is there an easy way to transfer data to Imac from windows

Ihave exported data files(Quicken) to a flash drive. When I plug it into my Imac I can see the files but not able to highlight them.

No I cannot, Ihave one file able to be moved (addresses) nothing else on tje drive can be moved

Are there any ways to increase security in ODI

Hi,
Are there any other ways to increase security in ODI. I have heard about External password storage, External authentication and SSO from over here: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/whatsnew.htm#CHDEAIAB
apart from these are there any methods?

I do not fully understand the meaning of "Top" in the phrase "Top In App Purchase". In Settings there is an option to invoke restrictions. One restriction option is to prohibit In-App Purchases.

Speaker volume too low on 3GS - any way to increase it?

The speaker volume is too low on my IPhone 3GS. Other than the volume control is there any other way to increase it?

With volume control do you mean the buttons on the side of the phone? or in settings? When playing something on speaker and i want it louder, I just click the up button on the side of the phone.

Alternative ways of increasing volume in Nokia E71

I am having an issue with the volum up button to the side (the volum down works just fine). Is there and alterantive way to increase the phones volume (when playing music). I cant seem to find the setting to do that.

@hithere2233
there is no in built settings available to assign any different key to volum up key
so i suggest you to send your phone for repair
for temporary solution there is an app called "magic key" using that you can assign different key to that key
using this two tutorials you can do that
http://www.symbian-guru.com/welcome/2008/12/make-full-use-of-the-volume-mute-keys-on-the-e71.html
http://www.symbian-guru.com/welcome/2008/06/how-to-kill-the-gallery-button.html

There is no way to increase dpi in Paint ! in Windows 7

Similar Messages

Maybe you are looking for