There is some problem while I try to put a figure in a slide.
Hi, There is some problem while I try to put a figure in a slide. For editing the data, the input will change into a date(e.g. 2014/1/8) while I key in a floating(e.g. 1.8), and I can't change it back to a floating while I use the new version of keynote. Is that a bug?
I have never seen this issue.
Try this, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store
Similar Messages
-
after the last udpate I can no longer access gmail or youtube. the error message from gmail is: We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects.
youtube just lists some generic issue regarding cookies, and my cookie settings are wide open. I can open both with safari so it is a firefox issue.Did you install any new add-ons lately? I see listed:
AddThis 3.5.9 ({3e0e7d2a-070f-4a47-b019-91fe5385ba79})<br />
Advertising Cookie Opt-out 1.5 ([email protected])<br />
Flash Video Downloader 5.3.2 ([email protected])<br />
Garmin Communicator 4.1.0 ({195A3098-0BD5-4e90-AE22-BA1C540AFD1E})<br />
socialvest 0.5.5 ([email protected])<br />
Troubleshooter 1.1a ([email protected])<br />
eMusic Community Toolbar 3.21.0.1 ({9ee802e8-c931-47ab-b570-aa8f791598ca}) (Inactive)
Are any of these new? -
Facing some problem while configuring Workflow Manager 1.0.
Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh AgravatRajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation. -
I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of. -
Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
Hi, my iphone is disabled now and it says connect to itunes but there are some problems to fix it .
Firstly, i reset my computer few days ago and never used itunes after that .
Secondly, the power button on the iphone is broken so i can't set the recovery mode on the phone.
I Tried connect the itunes with the iphone but the all itunes says 'To allow access , please respond on your iphone' but there's nothing i can do,
iphone doesn't respond at all .
I need some help .... i tried everything i could do ..Hey jinyoung_20,
Based on the information you have provided, it appears your iPhone needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, and express replacement service:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
i have updated newer version of iphone there is a problem while backing up administrator iphone.how to fix this error?
what error?
-
My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.
Hi ahsanikram!
I have an article here for you that can help you troubleshoot this issue with your iPhone:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I'm unable to make payment for creative cloud monthly plan. It says there is some problem processing the payment. I tried with three different cards. Still not working
"Some problem" is really not much information
Some links that may help
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html
-wrong email https://forums.adobe.com/thread/1446019 -
Sir, yesterday I'm trying to purchase an app but there is some problem and 300 bukes dedeticted from my account , why?
This is primarily a user-to-user support forum. You can report a billing problem at https://reportaproblem.apple.com or contact iTunes support at https://getsupport.apple.com/Issues.action
-
I would like to ONLY buy Lightroom, but it seems like there is some problems with this option. Or is it not an option anymore? (I already have photoshop installed)
Photo editor app | Download free Adobe Photoshop Lightroom 5 trial
At the above link go down to the bottom of the page right hand side. There is a button to purchase the Lightroom Perpetual License. -
I am working on Ubuntu 10.04,
Whenever I use to access a site which is java based site I am having problem to see the contents.There are several instants while browsing that we clicks a link & it opens a site which is a Ms DOC/EXL file which should get opened after the click & happens with the help of java script.
My problem is that I am unable to open the sites which is related to content transfer protocol of DOC/EXL
Plz do help.
Regards
SrijanHi Grace,
The free app MPEG Streamclip may be able to convert the file to a more suitable format. It can be downloaded from the developer's site here:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Here's a User Tip by AppleMan1958 that provides some more information about MPEG Streamclip (it's about importing homemade DVDs, but similar principles apply):
https://discussions.apple.com/docs/DOC-3951
John -
Using hbogo on iPad I keep getting message "there is a problem loading video,try again" please help
Using app hbogo on ipad2 I keep getting"there was a problem starting this video.please try again"message all the time,need help.
Has this always occurred with the app or did it just start?
Which content provider are you using? -
Still facing some problem while using JEXCELAPI ..
hi all,
i am trying to insert the data from a JSP file to excel. i am using JEXCELAPI but still it gives an class not found error. i install this api via ant in WINDOWS NT.
plz try to solve my problem ..i configure the :
ANT_HOME
JAVA_HOME
J2EE_HOME path and classpath both.
and already i install the jexcelapi via ant tool and it it gives the success message also.
but when i import the jxl.* package - it gives an error that class WritableWorkbook not found.
might be some problem in classpath setting plz suggest some hints.
thank you. -
Why is my Safari not working and saying there is a problem when I try to open it ? Please help !
Hello I am writing here because today as I was using my macbook air, a software update popped up. I updated everything that needed to be updated, and when my computer restarted I went to use Safari and it simply will not work now. When I try to open it, an exclamation point pops up and it says "Safarir wuit unexpectedly while using the TelevisionFanaticToolbar plugin." I believe that my internet connection is not the problem, because iChat and iMail seem to be working just fine. I really need help immediately, can anyone possibly run me through some steps on how I could possibly get it working again. What can I do ? Help !
Hey blondgrl53,
Sorry to hear you're having trouble. From your description sounds like you've got something installed in Safari as a plugin. Whatever this "televisionfanatictoolbar" thing is, you should probably get rid of it.
In Safari try going to Preferences -> Extensions and seeing if you have any plugins installed that you can disable. That is likely the reason for your problem.
Another thing you can do is remove your Safari preferences file by doing the following:
in Finder hit command + shift + g and enter "~/Library/Preferences" with out the quotes.
Find the file called com.apple.Safari.plist and delete it. This is completely safe, all it will do is reset your Safari settings.
If you go to "~/Library/Internet Plug-ins" you can also look in there for anything suspicious and throw it in the trash.
Hope that helps.
Maybe you are looking for
-
Automatic Generation of JMS event generator using WLST script
is there any way to create and deploy JMS event generator using WLST script. i am using weblogic server 10.3.1
-
BitmapData.draw() failing to draw entire MovieClip
Hi, all; I'm trying to do some lean blitting for an object that rotates by rotating it once at startup and capturing a BitmapData snapshot of each 5 degrees. The problem I'm having is that the draw() method of the BitmapData object is only picking u
-
Hello, I have a problem. The asynchronous call worked faultlessly under Oracle DB 10.2 and Oracle client 9.2. After the rearrangement to Oracle client 10.2 the VB6 function cannot be ended correctly. If I install the call OraStmt.Cancel explicitly, t
-
Hi, all! My new Pearl's working fine except...when I select "email settings" and try to log in for "exisiting users," I enter my password (the same PW I use to unlock the device) and get the error message "Please check your information and try again
-
Hello, Is it possible to change the task agent(decision task) dynamically after an organisation change(the employee has a new manager)? BR, K