There is something using a lot of the memory of my device

hi! itunes indicate that 3.42Gb are in the class of "others", what is this? apps or updates? please help me... thnks

"Other" should not be anywhere near that large.
This means some of your iTunes content transferred to your iPhone was transferred with some corruption which can occur if your computer has USB 1.1 ports instead of a USB 2.0 ports, or if not connected direct to a USB 2.0 port on your computer - connecting to a USB hub which is not recommended, or if the sync process was interrupted. It can occur sometimes regardless.
You need to restore your iPhone with iTunes. Before doing so, sync your iPhone with iTunes immediately before to update your iPhone's backup if needed.

Similar Messages

I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

I have a Nikon AW100 and I use a SanDisk for the memory and I download that with My Pictures and Videos but I cant get my videos onto IMovie

Hi
I import all from my Nikon - into iPhoto
Then closing it and opening iMovie
In the Event window like
• iPhoto-videor - Here I find mine.
Yours Bengt W

Under my website data (Settings, Safari, Advanced) there are websites using a lot of data which I have never visited before. Several of these listed sites are for tracking internet usage. Has my phone been compromised? Is there any other explanation?

I have recently discovered a website called bluecava operating on my iphone 4s, according to my website data log. I've never been to this site, but according to my data log this site is using a lot of data, along with other sites which I have never visited before. Does anyone know anything about bluecava (I've done my research, but I'm not finding information about individuals using this to track someone), or have any other explanation for seeing un-visited sites on my data log?
Someone recently mentioned phone "cloning" to me, meaning that my iphone may be accessed remotely. Any information is greatly appreciated!

Thanks a ton! Yeah, I didn't know about any of this until I had reason for legitimate concern. People should be aware of what's available. Someone intent on tracking you won't mind paying bluecava to do it for them...
I'll definitely be updating my browser as well. However, Lawrence, I did find during my research that bluecava DOES NOT operate based on cookies. It uses your IP address to consistently track patterns of behavior, even
within multiple devices of one household, so that deterring the tracking is not as simple as turning off cookies to a site. (See screenshot below from bluecava.com)
If you go to the bluecava site's privacy policy, you can actually opt-out, however, blogs have criticized bluecava for not explaining exactly what happens when a user opts-out. It may be beyond our control...

Is there a way to have Firefox respect the default audio output device when it has been changed while Firefox is open?

I have been a Firefox user for many years and I still use it as my primary browser. One problem that has bothered me for years is the fact that when Firefox is open and I change my default audio output device, Firefox doesn't respect that change and continues playing audio through the device that was originally being used. Even if you stop the audio and continue playing, the output device doesn't change.
Is there any way this can be configured in Firefox? Now if I listen to music online (e.g. Soundcloud) I always use Chrome since it's respects the default audio output device change even while in the middle of playing audio.
Reproduce:
1. Start playing audio (e.g. from a YouTube video; HTML5 and Flash are affected)
2. Change your default audio output device
3. Audio will continue to play from original output device
Thanks!

This is the same issue that has plagued me for years. I always thought that this was a Flash plugin issue, but it does occur on HTML5 as well. A friend of mine verified that this does not occur in Linux, but only on Windows. It would be great to have this fixed, as it's honestly the only thing that's making me use Chrome all the time, as I don't want to have multiple browsers open.

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

Is there a way using javascript to get the Site title?

I was wondering if there is a way to get the site title using javascript and then place that info in a workflow var?

Hi SPSADmin,
If you are using custom workflow then you can easily get site title in the workflow.Please go through below link to get site title
http://msdn.microsoft.com/en-us/library/office/gg749857(v=office.14).aspx
For Sharepoint designer workflow its bit tricky but you can achieve
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_27910482.html
Regards
Soni K

Using Labview's System Exec.vi, is there any way to send multiple standard inputs to the same executeable console? Or is there a way using Labview to target the window for the executeable and send commands to it at will?

thanks

One suggestion is to write a batch (.bat) file that will call your executable. The batch file can contain all the standard inputs necessary to run the executable. Then, in LabVIEW, you can call the .bat file using the System Exec.vi.
As far as your second question, there is no slick way to do this LabVIEW. You would probably have to call Window API functions using the Call Library Function utility. There is a set of VI's that call some of the standard API functions but I don't think they have what you want.
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&74DDE683A1AFF6988625683A000C0D73&cat=034E59A8530E09DF862568900018707A
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

Is there any exception used any where in the block

Hi All,
Is there is any Exception that can be used inside any where in the pl/sql block.
Thanks & Regards
Srikkanth.M

Yes, Srikanth.. many kind of exceptions are there which can be raised within a pl/sql block, after a begin keyword..
for example: if you have wrote select query, it can raise no data found exception (if select query doesn't return anything), multiple rows fond exception ( if query selects multiple rows) other select query related exceptions like table or column not found..
Exception List is here:
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/07_errs.htm#784
Regards,
Dipali..

I am having problems exporting Firefox bookmarks to Google Chrome. Please help. (Firefox is using too much of the memory.)

problems importing bookmarks from Firefox to Chrome.
Help.

Bookmarks > Show All Bookmarks -> Import & Backup - Export HTML...
Then import that file into Chrome.

Using attribute variables in the planning folders

Hi all,
Is there way to use attribute variables in the planning folders?
There is a following situation. We have a number of cost centers (0COSTCENTER). Cost center has responsible person (0RESP_PERS) as attribute.
We planning some costs for cost center.
To select certain cost center to cost planning we created
variable ZVAR1 as type CHAR and placed this variable in the header of planning folder.
Now we have to restrict list of cost center for selection according to selected responsible person.
Of course, I can add 0RESP_PERS to my cube, create variable ZVAR2 as type CHAR based on this character. Then place this variable to folder. For variable ZVAR1 use type of replacement as "User Exit" and ABAP routine will restrict list of available cost centers based on value of ZVAR2.
But... Is there way to use variable with type of attribute and place this variable to header of folder?
Thanks in advance!

Hi Dmitry,
Yes, you can use the attribute variable in your folder.
Just create attribute variable with 0COSTCENTER as the basic char and 0RESP_PERS as attribute.then when you create your folder with UPSPM, make sure to choose notweb-enable type then under the variable category you will see the the attribute vairable you just created at BPS0, just drug it to you folder, you are done.

Can you use surround sound with the built-in optical out on dual 1.8 g5?

Ok here's the thing, I just got the new version of Final Cut Studio, and was wanting to set up my g5 to utilize the surround mixing capabilities of SoundTrack Pro 2.
I have verified that i'm getting 5.1 sound via Apple's DVD Player, but when i go to Applications-> Utilities->Audio MIDI Setup, I cannot configure the system for multiple channels. It only allows me to output stereo.
Is my assumption of being able to use the built-in optical out for 5.1 monitoring incorrect? Do I have to go buy a firewire/usb audio interface?
Info about my system:
I have a Bose Acoustimass 10 5.1 Speaker setup.
I have a Onkyo DR-C500 5.1 Receiver, which does dolby pro logic 2 and dts decoding.
The Onkyo Receiver is hooked up via the spdif optical output of my G5.
I have a Dual 1.8 G5 with this info about the Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)
Dual 1.8 G5 Mac OS X (10.4.9)

NZane-
Greetings and welcome to the Apple boards.
The Mac puts out encoded 5.1. It is the function of the amplifier, receiver or decoder to take that signal and turn it into something useful. At minimum you will need a device that can accept that output and turn it into something useful.
Most studios that I am familiar with want to be able to use their own 5.1 decoder, amp and speakers. Juicier sound!
Luck-
-DaddyPaycheck

Can i use exchange 2010 in the mail(4.5)?

Can i use exchange 2010 in the mail（4.5）？
i can't use exchange 2010 in the mail （4.5），but i can use normally in the mail （3.6）。why？

Of course you can use your iPhone in the rain but since devices are not waterproof, nobody in their right mind would recommend it. The risk is yours and an out-of-warranty repair might cost more than a few bucks.
I highly recommend you read this article: http://support.apple.com/kb/ht3302
And some kind of a protective casing if you insist on using the device in the rain.
Live long and prosper!

Can I use my iPhone in the rain?

Yesterday I was with a friend who has had their iPhone 4 (White, 16GB) for around a year and a half, and it happened to be raining and they used the phone without any worries. They told me that they use it in the rain without worry and they are yet to experience any water damage.
Would it be acceptable for me to use my black iPhone 5 16GB in the rain without worrying, or is my friend just lucky?

Of course you can use your iPhone in the rain but since devices are not waterproof, nobody in their right mind would recommend it. The risk is yours and an out-of-warranty repair might cost more than a few bucks.
I highly recommend you read this article: http://support.apple.com/kb/ht3302
And some kind of a protective casing if you insist on using the device in the rain.
Live long and prosper!

How do I determine if the memory problems are with my imac and not the RAM?

I've heard of some vague problems with intel imacs and their memory slots. I'm about to replace (for the 3rd time) RAM, and think I need to test further to see if the problem is with my imac and not the RAM. Right now I put back in the original 2-512 sticks that came with the imac, and the rember test is only showing 594mb (odd amt!) testing OK. But, in "about my mac" it will show as 1gb.
Problems I've had with each set of RAM: occasional KP's, excessive spinning beachballs, sudden closing of apps (esp. if I have several apps running), won't fax usually (will hear a fax tone instead of a dial tone at the onset), disappearing documents section under my username.
I bought this imac refurbed thru the apple store last fall: 2.16 C2D 20" imac
Any ideas before I have to separate myself from my imac to send it in??

Hi Toodles
The pin strips on the new modules maybe a little thicker than your original modules, and it's going to take more force to seat them properly. If the new Memory Specifications are correct I would try them again. Slide them in untill they stop, then push real hard untill you feel them seat into place.
I've never seen a report about an odd amount of ram shown. If reinstalling the ram modules does not solve your issue, and may be a indication that there is something wrong with one of the slots.
Dennis
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

How to define the memory leak in stability test

Hi
Usually, we run our system with 70% CPU load for 72 hours for stability test (on solaris 10), because some plugin of our system is using mtmalloc, and we use prstat to monitor the memory of each plugin. But because of the complex memory usage of our application, we don't know when the application will use the Max memory, and because of the "mtmalloc", the memory showed by "prstat" will not released but continually increased.
So fro the test point of view, there is the risk of memory leak, but actually, there may be no memory leak, so my question is how to define the memory leak in such condition.

kevin wrote:
Thank you for the input and all the info.
isn't java heap the same as memory allocated to the java process in my weblogic
starup script ?The heap is sized by the -Xmx and -Xms parameters you pass on the java
command-line. The permanent generation is separate.
>
let me also download jprobe and try to run it and see what it gives me.
I'd start by running with -verbose:gc. I'd want to know whether you're
running out of heap or permgen space.
-- Rob
kevin
Rob Woollen <[email protected]> wrote:
Unfortunately memory leaks are not fun to track down even with tools.
I'd first suggest determining whether you're running out of space in
the
permanent area (where classes are loaded), or you've exhausted the java
help space.
I'd start by adding -verbose:gc. Look at the gc messages right before
you hit the OutOfMemoryError. If there's plenty of space left, I'd
suspect you're running out of perm space. Search these newsgroups and
the web for MaxPermSize, and you should see plenty of info.
If you're running out of java heap, tools like jprobe and OptimizeIt
are
helpful. If you can tell me a little more about your application and
how you're testing it, I can offer some more tips.
-- Rob
kevin wrote:
Iam new to JAVA and weblogic. I have an application that runs out ofmemory time
and again.
please let me know how to pin point this problem and moreover, howto interpret
or understand that there is a problem. I have downloaded JPROFILE tool,but it
is very confusing to understand what is goin on in this tool.
If somebody can let me know how to interpret and understand the memoryleak, that
will be great !!!
thank you.

There is something using a lot of the memory of my device

Similar Messages

Maybe you are looking for