There is still a purchase order commitment for WBS

Hi All,
We need to close whole project while closing I am getting the attached error.
There is still a purchase order commitment for WBS
Additional Information or Comments: = I have checked and closed all purchases order commitment. But still the project shows the below error .
Edited by: nandhasapfi on Sep 22, 2011 10:52 AM

Hello,
This message is being output correctly as the AuC still has
values against it.
These values must be cleared before you can close the WBS element.
Please do a FUL settlement against the WBS element to clear
these values and then try to set the CLSD status again.
There are two ways to 'clean' the AuC, so that you can deactivate it
and close the wbs element:
1. Post a manual retirement of the AuC to clean it.
2. Create a new AuC and use it for all the differences in the final
settlement.
I hope this helps,
regards
Ray

Similar Messages

There is still a purchse order commitment for ORD X for CO_ORDER archiving obj

Dear Experts,
I am facing issue for CO_ORDER archiving object. I am getting error saying like
" there is still a purchase order commitment for ORD 200060" and
"order 200060 still has at least one purchase order that you need to do".
screen shot attached for reference
so Please help me to solve this issue.
Thanks in advance,
Ningappa S M

Hello Manju Sir,
Now that issue setting of deletion indicator is got successful. I mean I set residence time 1 as 0 and I tried to archive and I got successful. but I am facing the issue saying " there is still a purchase order commitment" , "there is a still Purchase requisition assigned to order" and
"still has at least one purchase order that you need to delete" etc for all orders when i set residence time 1 as 39 months (even i tried by setting the residence time 1 as zero i am getting the same error messages) and residence time 2 as 0. for these orders deletion flag itself is not getting set. so please help me for this.
Thanks,
Ningappa

Error-"There is still a purchase requisition commitment for ORD #########."

Hello All,
I am trying to set deletion flag an internal order using transaction KO02 and am receiving an error "There is still a purchase requisition commitment for ORD #########."
1> What does this mean.
2> How can I solve this problem
Moosa

Hello Moosa,
When you want to close an order, the system checks for dependanting data
to alert you that there are open items that have not been received, etc.
You need to close the purchase orders and requisitions so that the order is no longer "expecting" postings from these dependant objects.
Please consider running the following reports which have been known to correct inconsistencies in commitments:
Report RKANBU01 resets commitments on orders and ranges of orders.
(See note 100409) (Note 125266)
Reports ZKAOIDE0 & ZKAOIDE1 removes commitments which refer to purchase orders and purchase requistions which do not exist.
(See ANote 100409)
Report RKACOR04 corrects mistakes between total and line items in
database tables. (See Note 113423)
I would recommend implementing these programs in a test system first.
You may also want to consider Notes 152571 & 157369 if you are receiving error messages KO447 and/or KO448 when attempting to delete/close the order.
Best Regards,
Gladys xing

Purchase Requisition commitment for WBS

Hi! PS Gurus!
There is one issue in my support project. While closing one WBS, the system gives an error that u201CThere is still Purchase Requisition commitment for WBSu2026.u201D
But when I checked ME5J, some cost exists at PR. Later on I came to know that Purchase requisition is missing from the system, it has been deleted from the system. The solution I find out from SAP note. Some report we need to upload from basis people, again later on I came to know that the data is not uploadable, the main thing abaper found out that there is no program exists for that particular report.
Plz tell me wht do I do to recover my PR.
The report ZKAOIDEO edits commitments for which there is no P.O or P.R (for this reason, you cannot use ME23N or ME53N to display a P.O or P.R for these commitments.
Plz give me ur suggestion. Need ur help.
Regards,
ANSAR.

As per abopve query,
In Production server the PR is Missing, that means it is deleted, it can be seen only in cji5, we see that commitment of Rsu2026. exists against PR no...., itself doesnot exist in system.
Plz let me know how it is possible that PR is non-existent (T-code-ME53N) inspite of commitment against it & how to reverse/clear the commitment in such case to close the WBS.
Report RKANBU01 is there in the system, but ZKAOIDE0 & ZKAOIDE2 doesnot exist in the system, then how to run RKACOR04 in the system.
plz need some help.

Purchase Order Commitment Item

Hi,
Could you please help us to solve this issue
When we trying to business completion of Maintenance Order the system is giving the error message "There is still a Purchase Order commitment for Order".
We have seen there is one Purchase order created from the maintenance order and the invoice is created for this PO. After that user set deletion flag for this Purchase Order and PR also. But still the system is giving the commitment item open error message.

Hi
Use T Code SE38 and execute the program RKANBU01 mentioning the Maintenance Order to which assigned in PR/PO.
If still problem persists, then undo the deletion flag & set final invoice indicator for the PO and then check.It must allow then
Thanks,
Manish
Edited by: Manish Chachra on Aug 22, 2008 8:23 AM
Edited by: Manish Chachra on Aug 22, 2008 8:26 AM

PM - MM order can not be completed due to purchase order commitment

Hi
The error "There is still a purchase order commitment for ORD XXXXX" comes up when I try to complete an order in the transaction IW32. I pressed the cancel button then the information box comes up with the text "Order has status "technically completed"". I checked if there is any open PO assigned to this PM order. Yes there is one which was already GRposted and invoiced in 2006. Final invoice indicator has been set too.
I would appreciate a lot if you can help me regarding how to complete this order? Is it a program error.
Regards,
Esra

Hi Thyagarajan
I checked the operations in the PM-order. There are two external processing operations. One has an aggrement which has the validity end 2005-12-31. I don`t see where to see if the other operation is assigned to a purchasing document. In the menu path, extras, cost reports there is a PO which was already invoiced and GR-posted.
I don`t know where to look for more if there are any open purchasing documents?
Thanks.
Esra

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Restrict print out of Purchase order only for Production system

Hi,
I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
is there any identifier to find the system is production or development.
can anyone tell me how to restrict it,
is there any function module, not based on client system.
Thanx in advance
Kesav

Hi Kesavarathinam Vaidyalingam ,
yes, I also use thomas' suggestion using
t000-cccategory = 'P'.
to determine productive client.
Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to t000-cccategory = 'T'.
Regards,
Clemens

In Consignment is there any case of Purchase order or purchase requisition

Hi All,
Can u tell me In Consignment is there any case of Purchase order or purchase requisition ? Also in fill up is there any PGI ??? How to keep special stock in Fill up ?
My id : [email protected]
Appreciate your information and will definitely reward points.
Regards
Rajarshi

Hi
Here's a General thumb rule,
Consignment fill up
-Sales order>delivery[ PGI]->no billing
Item Cat = KBN, Schd ln = E1
*In this step, you are not invoicing the customer. document flow is sales order -
delivery item category. It will not be relevent for billing and pricing because you are not charging money for these goods in this step.
In schedule line category, you will set movement type 631 & set for availability check and TOR.
Consignment issue
-Sales order>delivery[ PGI]->billing
Item Cat = KEN, Schd ln = C1
Consignment pick up
-Sales order>delivery[PGR]->no billing
Consignment RETURNS
-Sales order>delivery[PGR]->Credit Memo
Item cat = KAN ,schd. line F1
Hope this helps

Purchase order approvals for Negative amount

Hello All,
Want your assistance on the above mentioned topic.
We have a business requirement to have Purchase order approvals for Negative amount. I understand from the Below SAR that JD Edwards 9.1 doesn't support PO approvals on Negative amount
Bug 11022294 : APPROVAL ROUTES FOR DEBIT MEMO - SAR: 8940968
Appreciate if you can suggest best practice or workaround to meet this requirement.
Thanks & Regards
Nikhil M. Pawar.

Dear Ashutosh,
Couple of points from my side. We have a similar scenario at a client where I am working. In construction, there are three stages.
a) Practical Completion
b) Partial Completion and
c) Final Completion.
In the case above, you are not deducting an amount from existing PO, you would be applying a penalty on the Vendor for Failure for not meeting the Practical/Final Completion Certificate requirements. Based on the legal understanding, usually the penalty may vary above and beyond of 10% of value of work not done/ delivered. (This is company to company)
So we establish that the scenario above is not a case for PO, but for Penalty. Now penalty in construction business again is of three types (My understanding again from experiences)
a) Time/Schedule based penalty - Levied on vendor due to delays (Ranging for 100 SAR/ Day to 400 SAR/Day - if you are in Saudi)
b) Cost/ Quantity Based penalty - Deviation from Standard Plan/ over consumption against budgeted quantity in Bill of Ladding
c) KPI/ Quality Based Penalty - This can be a levied for number for reasons, including non completion of agreed deliverable in Contract. (This can be even 150% of contract value)
Now, penalty is a revenue to the Organization so this needs to be accounted differently. You apply a Penalty against a PO and create a Debit memo and show the penalty as revenue in the books. This cannot be done if this is entered as a PO.
So, my point is, you need a customization to capture the penalty and apply it against the PO and account it as a debit memo in Finance side.
Please let me know your thoughts, I will be glad to hear if I need to be corrected.
Rgds,
Abhi

Purchase order commitment - retrospective generation

Hello all,
I would like to ask, if it is possible to retrospective generate a purchase order commitment.
Until now, we didn't had activated the commitment for some order types.
Now, we are going to activate it and I wonder if it is possible to retrospective generate commitment for all those orders.
Thanks a lot
Regards
Peter

Hi Peter,
You may try to run RKANBU01 report and afterwards RKACOR04 report. I'd suggest to do it in test system first. You may look at note 152571 for further information.
Regards,
Eli

No active purchase order item for shipment cost

Hi,
When I'm entering a shipment cost document for a shipment using Vi01, I'm getting an information like "No active purchase order item for shipment cost", When I check in the service procurement tab there is no purchasing document and entry sheet found.
Please let me know what is causing the problem and what needs to be done to resolve this
Regards,
Ashwin

Hi,
Does your shipment document contains any stage?This problem might be because of this reason.
Regards,
Sumit

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

There was no way to order AppleCare for the iPhone 5 using the online AppleStore to have it activated automatically. Am I missing something?

I must have missed the option to add AppleCare+ to my iPhone 5 pre-order, too. Fortunately, I was able to obtain confirmation from an Apple representative that AppleCare+ can still be added to a new iPhone 5 within 30 days of the device's ship date.
My iPhone 5 Ordering Situation:
Successfully submitted pre-order at 2:05am CST
Realized I did not add AppleCare+
Tried to add it as a separate product
Unable to add AppleCare+ after submiting pre-order
This Morning:
I just got off the phone with an Apple representative. He assured me that, once my iPhone 5 arrives on September 21, I will be able to: 1) call 1-800-MY-APPLE and have AppleCare+ added to my iPhone 5; 2) go into an Apple Retail Store and have AppleCare+ added to my iPhone 5. He said I would have thirty days from my device's ship date (September 21) to add AppleCare+ to it. He also recommended that, if I wanted to have AppleCare+ added at an Apple Retail Store, I should make an appointment as soon as possible. Because I was still concerned something might go wrong, the Apple representative emailed me a copy of my case number to use as a reference in case I have any issues obtaining AppleCare+ on September 21.
Caveats & More Information:
I ordered through the Apple Store app on my iPhone 4
I live in the United States
My carrier is AT&T
I have a case number and repeated assurances from an Apple representative
While your situation may differ from mine I do hope you're able to add AppleCare+ to your iPhone 5 once it arrives, either by calling 1-800-MY-APPLE or by making an appointment at your nearest Apple Retail Store.
Best Wishes,
Dylan

Purchase order number for each postings with FBL3N

Hello
With tcode FBL3N, I need to get all the postings on expenses accounts. Additionally it is possible to get more information on the postings from the orginal paper invoice. It shall be also more convenient to get the purchase order number walk trhough SAP with it. Then is it possible to get the purchase order number for each postings with FBL3N?
thanks for inputs
sb

Hello,
Could you please add field BSEG-EBELN as a special field in FBL3N (from
menu path Settings -> Special fields).
Then, select the Purchase order field again from "Change Layout"
(Ctrl+F8). Now this field is available for display variants, it has the
technical name 1-U_EBELN and the description 'Purchase Document'.
The other field has the same description but as technical name
'1-EBELN'. When you create a display variant be aware that you select
1-U_EBELN and not 1-EBELN.
*******Please also refer to attached notes 215798 and 984305.
Best regards, Hana

There is still a purchase order commitment for WBS

Similar Messages

Maybe you are looking for