There isn't Org. Search in free search of PERNR on PNP Screen with report

Hi experts,
I create a standard PNP screen with HR report, but i find there isn't org. structure search in free search for PERNR .
Should I do configure anywhere to use the org. struture search of PERNR ?
Thanks a lots.
Yoga.

Hi,
do you use a reportclass e.g. X__X2201 ?
Regards
Bernd

Similar Messages

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

Is there a way to make iPhone speak what is displayed on the screen, with a simple click?

is there a way to make iPhone speak what is displayed on the screen, with a simple click? Instead of going through the Accessibility and VoiceOver feature. This will be very useful if I am driving, or tired of reading from the screen, or watching other stuff ... thanks

No.
What is available via Accessibility settings is it.

Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

TS1363 I was updating my iphone 4S to ios6 and now there is a picture of the end of a charger on my screen with an arrow pointing to the words itunes... I have turned on and off plugged and unplugged ... HELP I need my phone...

Help my phone only has a picture of a charger with an arrow pointing to the words itunes, I have tried everything.. can't get my iphone 4s to work after trying to update...please
<Email Edited by Host>

This normally indicates to reconnect the iPhone to the computer via the USB cord

There is no google search

there is no google search and no other search.
can't find it on the addons site - there are customised google searches but what makes me really cranky is when i type google none of the top options are anything to do with google.
this simply isn't teh interweb without a working search bar, please help!

"F11" will toggle into or out of Full Screen mode
If you are not displaying all your toolbars, check what you have
* View ("Alt+V") > Toolbars > ...
If the search bar in not on the toolbsr you want it on or missing
use Customize (View>Toolbars > Customize) to mve it back.
* https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
*http://kb.mozillazine.org/Toolbar_customization_-_Firefox

Is there a way to search several keywords at a time on the top right search box?

Hello.
Let's say I want all the images to appear that have any of these keywords: "sky, mountain, water". The only way I have figured out it takes too long and it's tedious. I open the "find" window and manually add search variables to look for several keywords and file names for the values that I am looking for.
Isn't there a way to search for files that have any of the keywords I write on the search box by dividing these keywords with commas or any other puntuation? Or am I stuck opening the "find" window and add rows of variables that I want to search?

I really do hope you are part of the development team for the Bridge.
If only…
I'm just a user like you and almost all other participants. Steve (SG) is one of the very helpful Adobe Engineers who occasionally hang around every now and then but they do so out of personal interest and kindness. They also try to be a shortcut to the Bridge engineers, it is no company policy to interact directly with developers on this user to user forum...
But if I was responsible for resources for the Bridge development team they already would have had loads of money to realize my perfect Bridge and this process would have started from CS3 and above…. but as said, I'm just a humble photographer with no knowledge at all in programming applications and by far not enough money to realize this dream app
Regarding your Find comments, I do realize there are some extra actions needed and the less you can make the better it would be. However as said, I don't know of any DAM application capable of what you want.
It is kind of looking into a database and that needs separate criteria to my knowledge. If I had to use the search function that much I would look for a dedicated Digital Asset Manager to do this tasks.
I'm not very deep in to knowledge about DAM but I use Canto Cumulus Single user for my Archive which is much faster then Bridge (Bridge is much better in other tasks so I need both).
In Canto you can create a query to customize your own search needs in a better way but this needs some extra knowledge and study, I have only 65 K of files in my archive and searching is not that difficult using the normal route of quick find.
And to comfort you a little, both Bridge and Canto do reopen the find menu with the last settings which is still not ideal but saves a bit of moves. Having the option to save templates like in batch rename would be a big plus but it is not an option yet.
And of course, you can also put in a feature request for this:
http://feedback.photoshop.com/photoshop_family/

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Is there any way to search for bad blocks in my Macintoshi HD without formating it? I'm experiencing too much I/O problems...

Check the drive health with the free demo of SMART Utility.
http://www.volitans-software.com/smart_utility.php
Reformatting and zeroing out might keep a drive going a bit longer, but once bad blocks become noticeable, it's not a drive you should trust any longer.

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice

Is there any way to tell which formulas a particular cell is in, reverse look-up style? That is, is there a way to search somehow for which formulas in a sheet contain a particular cell in them without opening all of them up? If not, it would be nice.
I'm fixing a Numbers document that I use in business daily that's become overly complicated, but while I want to clear/delete a number of cells in it to clean it up, I'm not sure if those cells are being used as source for other formulas on the page. I don't have to open all my formulas one by one to see if that cell is in there, do I?! That'd be a huge amount of work if I wanted to eliminate say 10 cells to search each formula on the page to see if it is in there or watch all the cells when I delete that cell to see if the numbers change! There's got to be an easier way! Right click doesn't seem to be any help.
I don't want to damage my daily tool to make it cleaner and reorganize it. Is there really no way to do a reverse look-up of which formulas a particular cell is in?! Any time I click on a formula it highlights all the CELLS in that formula. Why can't I (or can I?) do the reverse and see all the FORMULAS that contain a particular cell?
As a Numbers document ages or gets used frequently, you can sometimes forget which cells are tied to which formulas. You just look for the results of your formulas. Would be a nice thing to be able to do. Thoughts? Work-arounds? Answers?

Answer would be no unless application provided such feature. Numbers does not as far as I know.
Note that even if you have complete list of formulae used in a table, identifying formulae referencing any given cell is not simple.
E.g., cell T20 is referenced not only in
=T20+1
but also in
=SUM(T)
=SUM(20:20)
=SUM(S19:U22)
=OFFSET(S1,19,1,1,1)
=INDIRECT("T"&(10*2))
In order to identify such formula, we have to actually evaluate it to see if it references the given cell. Especially such formula as OFFSET() and INDIRECT() may not be found by static parser because their parameters can be dynamic.
Sorry to be the bearer of bad tidings.
H

Is there a way to search contact list by keyboard

is there a way to search the contacts list with the keyboard rather than scrolling down via letters? i have like 2000 contacts and some letters are really long. would be much better if there was a search box (like that for SMS) where I could input letters via the keyboard.
does that exist? have i missed it?

That feature is not available
You can request it here:
http://www.apple.com/feedback/iphone.html

Is there a way to search Numbers for UNCHECKED checkboxes?

Hi,
I'm attempt to build a spreadsheet to track incoming payments from various sources. I'm using checkboxes to confirm when a payment has been received. The question is: is there a way to search for unchecked checkboxes so that I can find instances where a payment has not been received?
Any tips or ideas would be greatly appreciated.

Hi Wyatt,
I agree with Jerry's suggestion that entering the date of payment rather than checking a checkbox is a better means of tracking the payments.
For either entry method, you can use conditional formatting to highlight unpaid rows.
For checkboxes, use Text is FALSE for the rule.
For dates, use Text does not contain 2013.
Examples are shown for both types of payment record:
Regards,
Barry

Is there a way to search cookies in "exceptions" as there is with "show cookies" in Preferences Privacy?

I have a problem with Firefox when trying to view an embedded YouTube video - I always get an error message. I thought I should check to see if I had cookies in the exceptions - either blocked, or allow for session - that I should delete to see if that would fix the problem.
It takes me forever to search through my "exceptions" cookies. Is there a way to search them like you can in "show cookies"? If not, it would sure be fantastic if someone could do that.
Thank you.

You can start typing the first letters of the site's URL after you have set focus to the area with the site names with a mouse click. 
For the current site you can see all permissions in Tools > Page Info > Permissions 
This won't help for third-party cookies, but should work for the current server.
What is the default setting for cookies? 
Are you blocking all cookies and only allow some?

Is there a function to Search a Text File?

I am writing a program that will read data from a URL and then save that URL to a text file. I then need to be able to search the text file for certain strings and must know which line they appear on. I realize that I could read the text file in line by line looking for the string and then note the current line number. However, I need to search for 20-30 different strings in each URL and this would be very inefficient. I would really like some way to say:
int lineNumber = 0;
lineNumber = searchText("sometextfile.txt", str);
And have searchText return the lineNumber on which the String str was found. Alternately, if there is way to search a URL that would cut out the middle man of writing it to a text file first.
Any help would be greatly appreciated as I could not find this anywhere. Thanks.

I have done something similar to to this, but it depends on what you want to use it for. I was looking for specific data on websites and would copy that data into a database. So, I used regex to find the data on the site and copy it. I also had to use String Tokenizer in certain places to get the correct data sometimes.
orozcom

Is there a way to search for photographs that are missing?

I have discovered that some shots that I thought had been imported from iphoto are in fact missing (when I go to open them there is a badge with the yield sign and an exclamation point in it)
I don't think this is the end of the world as I have the original files in various places and can import them (I guess)
but is there a way to search to find all the shots that are missing?
right now I'm having to scroll through the whole database in the list format and I have a lot of shots. can't seem to figure out how to do a search for missing shots…
m

1. Create a smart album and in the drop down in the top right corner select file status
2. Check mark the file status box and select 'Offline'
Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
To reconnect..
1. Select the missing files.
2. Go to File and scroll to Manage Referenced Files
The dialog box will have one of the photos selected
3. Select the drive and folder that contains the referenced file and select it
4. Click 'Reconnect All'
This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
Narvon
Message was edited by: Narvon

There isn't Org. Search in free search of PERNR on PNP Screen with report

Similar Messages

Maybe you are looking for