There's a problem with the drive scan drive message appears when plugging in ipod into a new windows 8 computer

I have a new Windows 8 laptop. I copied all of my music onto it. I then plug in my ipod and get "there's a problem with this drive, scan and fix now". When I click scan and fix it tells me "can't perform the check because Windows can't access the disk.".
I uninstalled iTunes and reinstalled it - but same problem.

bump, I have same issue. thanks, MM

Similar Messages

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?

As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck

I think there is a problem with the latest version of Firefox. When you minimize one window (doesn't matter how many tabs) on Mac, it automatically minimizes all of the other open windows. This never used to happen.

Whenever you have multiple windows open - say one is your Gmail account and the other is a bunch of pages you're using at work - and then you go to minimize the window with Gmail but intend to continue working on the other open windows. Using Command-M (the minimize shortcut for Macs) unfortunately now sends all open windows to the minimize bar in the lower right. Which means - every time I go to look at Gmail, then put it away, I have to reclick to open all of the other windows I was working in. Can this be fixed? It never used to happen.
== This happened ==
Every time Firefox opened
== I upgraded to the latest version of Firefox

Because OS X 10.4* does not have what is needed by Firefox 4.0 and newer.
Linux users are in a similar boat also as they need certain package versions within the last few years as LTS distros (with outdated packages from 4+ years ago) like CentOS is a bit screwed on newer applications like Firefox 4.0. By your logic Mozilla should also support Linux packages from 10 years ago also which would be a really ridiculous thing to do.
I think only the 64-bit Windows Vista and Windows 7 is really supported or will be rather when it comes to 64-bit builds (still not officially supported yet).
Mozilla is still supporting Firefox 3.6 with updates, in which 3.6.16 can be found at http://www.mozilla.com/en-US/firefox/all-older.html

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

Suddenly my nano (6th gen) can't be detected and windows 8.1 says there is a problem with the drive, but it can't be fixed

I've had this for sometime and this laptop for about 1 year. Never saw this before, but haven't tryed to line up with ITunes for a while. I get a notice from windows that there is a problem with the drive and it asks it i want to fix it. Nothing happens if i try, so I have not persued that avenue. ITunes says a IPod is detected but the identification cannot be verified. Whats up with that?
Thanks

Hello, Wallydawg.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this error.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H.

HT1567 i can not sync my new purchased music into my ipod, it states there is a problem with the drive

i can't sync my new purchased music into my ipod, it states there is a problem with the drive.

Hey Texasdee07,
I found the following information that should resolve the issue:
To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.
Warning: Be sure to back up your data before restoring an iPod. The restore process cannot be undone. All of your songs and files will be deleted.
via: 'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
http://support.apple.com/kb/HT1207
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

Downloaded Mt Lion. Now my facetime launches then quits with message that there is a problem with the C_L Kernel Plugin. Everything else works just fine. I can get on line etc.

I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.

A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Getting error and cannot download itunes. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas?

getting an error downloading itunes 64bit for windows 7. says there is a problem with the windows installer package. a program required for the install to be complete could not be run. any ideas? i uninstalled it last night when it would not open.

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

There's a problem with the drive scan drive message appears when plugging in ipod into a new windows 8 computer

Similar Messages

Maybe you are looking for