There's a problem with the sound on my laptop. i cannot hear the sound although i can see it working

HP G62
Cannot hear audio on this laptop. The volume is on and working but I cannot hear the sound.

Please do a BIOS update and this may fix the issue, if possible do a Audio driver update too.
If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

Similar Messages

Downloaded Mt Lion. Now my facetime launches then quits with message that there is a problem with the C_L Kernel Plugin. Everything else works just fine. I can get on line etc.

I have have an early 2008 imac 8,1 It has been a good machine no problems. UNTIL we downloaded Mt Lion. We can no longer use facetime. We click on the icon it comes up, tries to connect then it disappears with the message that there was a problem with the C_L Kernel Plugin. We can go on line without difficulty, everything else seems to be working. Searching the internet shows that others have had the same problem with Mt Lion. But so far I haven't found a solution. We have wiped the drive reloaded snow leopard then downloaded Mt Lion again. We put in a NEW hard drive and reloaded snow leopard then Mt Lion. We have changed out ram using apple ram. But we still get the same result. Everything works except for Facetime. Is there some patch we have missed? Facetime DOES work on our ipads without a hitch so I doubt it's the internet connection. We've tried the imac both wirelessly as the ipads run and hardwired and get no where fast. So any help at all would be appreciated. We live in the boonies, the nearest mac repair is over 150 miles away so this is pretty nuch a do it myself affair. We know the machine is old by most standards today. But we pretty much run our machines until they can't power up. So we'd like to get this one back on its perch so to speak with its face time working.
Thank you ahead of time for any advise help given.

A log may help determine what the issue is ...
Open the Console app located in HD > Applications > Utilites
Select: System Diagnostic Reports on the left.
Copy and paste the most recent kernel panic or crash log in your Reply.

Suddenly my nano (6th gen) can't be detected and windows 8.1 says there is a problem with the drive, but it can't be fixed

I've had this for sometime and this laptop for about 1 year. Never saw this before, but haven't tryed to line up with ITunes for a while. I get a notice from windows that there is a problem with the drive and it asks it i want to fix it. Nothing happens if i try, so I have not persued that avenue. ITunes says a IPod is detected but the identification cannot be verified. Whats up with that?
Thanks

Hello, Wallydawg.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this error.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Cheers,
Jason H.

I'm trying to download hunger games but it says that there was some problem with the dowload. What can it be? (It is not internet)

"Can you please help me? I don't know what to do! It says that "There were problems downloading a purchased item" what should i do? (It isn't internet)!!!
Thanks!

what form of media are you trying to download? If a book from the app store, those can only be read on iDevices, not macs.

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

There is a problem with the security certificate of the proxy server. Error code 18 and 38.

Hi All,
After several hours and a short night of sleep I'm out of ideas and hopefully someone here can help me trying to solve this one. First of all the situation:
Exchange 2013 on a remote location with a CA-certificate.
Outlook 2010 and 2013 on different locations, locally installed and on RDS.
When I open Outlook on my laptop all is fine, no errors, good sync, no problem. But when I open Outlook on our Remote Desktop Servers with Outlook 2013 I'm getting errors like "There is a problem with the security certificate of the proxy server. The
name on the security certificate is invalid or does not match the name of the site. Outlook is unable to connect to this server. (Error code 18)". Opening Outlook 2010 the message is the same, but the error code now is 38.
After this Outlook opens and is working, there's one more error though. After a while an security warning pops up with the message: "Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the
site's security certificate. * The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority. * The security certificate is valid. * The name on the security
certificate is invalid or does not match the name of the site."
Strangest thing is, it is the certificate of my RDS! It isn't my valid en officially bought certificate from my mailserver. What's going on? I'm out of options, what I've tried so far (in random order):
- restarting mailserver and AD;
- restarting switches;
- restarting routers;
- restarting RDS, AD and all other servers;
- bypassed proxyserver for RDS;
- created a new profile;
- checked recently installed updates;
- checked certificate on mailserver;
- checked RDS on a different location, working fine.
Nothing helped, what can I do next? Please advice.
Regards.

Found a thread that solves half my problem (https://social.technet.microsoft.com/Forums/office/en-US/70d18244-889a-4d95-ac3f-e234672a82b2/there-is-a-problem-with-the-proxy-servers-security-certificate-error-when-starting-outlook?forum=exchangesvrclients).
The first message can be suppressed by adding this to the Exchange config:
set-outlookprovider -Identity EXCH -CertprincipalName msstd:webmail.domain.tld
set-outlookprovider -Identity EXPR -CertprincipalName msstd:webmail.domain.tld
Giving the command get-outlookprovider, gives me empty information regarding the certprinipalname. Filled
this and after recreating the profile or deleting the ost-file I still have the second alert with the local certificate of my RDS.
Not completely where I want to be, any help regarding the second alert is greatly appreciated!

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

My I phone 4 won't restored saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime

My I phone 4 won't restored saying there is a problem with the iphone. Appointment made but 5 days away. can anyone help in the meantime

You need to do as provided. If no change after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.

SCOM - -500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed

Hi There,
Need your assistance on the issue that we are facing in prod environment.
We are able to open web console from remote machine and able to view monitoring pane as well as my workplace folders from console . Able to view and access alerts and other folder in the monitoring pane. We are able to view and access My Workplace folder
and able to view the reports in Favorite Reports folder. But when I click on run Report we are getting the below error "500 Internal Server Error - There is a problem with the resource you are looking for, and it cannot be displayed."
In our environment we have 3 servers one is SQL server and two are SCOM servers. Please advise how to fix this issue. Do we have to do any thing from SQL End?
Errors: Event ID 21029: Performance data from the OpsMgr connector could not be collected since opening the shared data failed with error "5L".
Event ID 6002 : Performance data from the Health Service could not be collected since opening the shared data failed with error 5L (Access is denied.).
Regards,
Sanjeev Kumar

Duplicate thread：
http://social.technet.microsoft.com/Forums/en-US/7675113e-49f0-4b3a-932b-4aceb3cfa981/scom-500-internal-server-error-there-is-a-problem-with-the-resource-you-are-looking-for-and-it?forum=operationsmanagerreporting
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

TS5183 My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore..:-( this has been playing up for some time now.

My Iphone has a problem with the microphone it doesn't seem to work! so there for i can't use Siri anymore.. this has been playing up for some time now. But as my wife & I had a baby 7 Months ago I have not found the time to pop in to the apple store until today (8/12/13) and they told me that they couldn't help as it's out of it's warranty by 57 days
Can antone help me? is there something i can do, apart from buying a new iphone!

Have you got Siri turned on in settings/general/restrictions?

ITunes won't upgrade to10.5. Error message "There is a problem with the Windows installer package. Contact the package vendor". I need help.

iTunes won't upgrade to10.5. I'm on 10.1.17.
When installing 10.5 it terminates with an error message "There is a problem with the Windows installer package. Contact the package vendor".
It does not provide an error code or details/description to further troubleshoot. As a result I can't upgrade my Apple devices to leverage the cloud.
Any smarts out there who could help?
Using PC Win-7 w/IE 7 (should that matter)
Thanks much

I know there's a million threads like this, but I thought I'd record my experience. I, too, was having the original poster's error when I tried to update iTunes on Windows XP. I think I was stuck on 10.
I solved it by un-installing iTunes and every other Apple app. I discovered that Apple Software Update would not un-install as its MSI file could not be found. I used the "Windows Install Cleanup" tool from Microsoft to remove Apple Software Update from the list of installed programs. Google "kb290301" for a Microsoft page that includes a download link for it. After that, I was able to install a fresh copy of iTunes 10.5.2.
I'm not sure why this app's folder and MSI were missing from my computer. I had once used Laplink PC Mover to move everything from my old computer to this one, and perhaps it missed a bit.

There's a problem with the sound on my laptop. i cannot hear the sound although i can see it working

Similar Messages

Maybe you are looking for