There's no clip in the box to get the sim card holder out!

when i open the box, but didn't find the the clip.
i think there should be a clip right?
if no, how can i get the sim card holder out?

Nope, it clearly shows in Apple's that no SIM tre oval tool is included.
http://store.apple.com/us/buy-iphone/iphone6

Similar Messages

My iPad says no service, and cannot connect to the server,cannot get mail .Sim card is locked and down to one last try.My wireless works for other pads and phones.

IiPad says no service,and in mail says cannot connect to server.Wi Fi is working fine.

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.

My macbook air was stolen from checked baggage. I have the box with all the information. Is there a way to disable this device? Block it from my Yahoo email? Locate it? Any ideas?

HI, My Macbook Air was stolen this week from my checked baggage.
I have the box with all the information SN etc.. Is there a way to disable this device? Block it from my Yahoo email? Locate it? Any ideas?

If you activated "Find My Mac" in iCloud before the loss, maybe. Otherwise no.

I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

I have bought photoshop elemnts 12 and have a CD, but there where no serialnumber in the box or on the folder. What shall I do to activate. Have tried to search a support number in Sweden but i can´t find any.

Find your serial number quickly
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

How to update the BOX version of the Logic Pro 9 in Mountain Lion??

Hi!
How to update the BOX version of the Logic Pro 9 in Mountain Lion?
For example, if tomorrow will be new updates for Logic Pro for exapmle 9.1.8. (now I have 9.1.7) Will I not able to get it?? Now should I buy the second Logic pro??
Recently I have got answer from App Store support:
"Max, since you have not purchased the app in the App Store, you can't get updates directly in App Store. In this case, you will need to purchase the updated version in the App Store so you can get further updates."
It's... I bought Logic Pro 9 + MainStage + + +++ .... in the Apple Retail Store and what now?? Updates works perfect in Snow Leopard.
I can't understand...
Can you help me please? =)

Max,
Rest assurred, you will get updates via the App store. What will happen is when you install the box version, the Mac App Store will ping when there is an update to download(for free), much like any other Apple app(Garageband, iWork, etc) regardless of where you bought it from. If it's installed, it will check for updates.
If the Mac App store doesn't show an update that you know is out, simply down it directly from support.apple.com and apply it.
Hope this helps. If so, LIKE the post.
Glenn

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number. Anything I can do to get the mini mac right out of the box to recognize the windows keyboard? Do I have to buy an Apple Keyboard to get it to work right out of the box?

Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

Out of the box behavior of the Pagination control

Why does the Pagination invoke the PageFactory callback upon page count change? And when it does invoke it, why is it with currentPageIndex=0? Should there be an API to remove this listener if this is undesirable behavior? If we know we may need to alter the Page Count after construction of the Pagination control, would it be best to remove the old one, and construct a new one for display at that point since the current implementation seems to behave inconsistently when one wants to alter the Page Count post-construction and/or callback configuration.
Please consider the following scenario:
The user is viewing a TableView of items. Below the TableView is a Paginator whose PageFactory callback fetches rows from a database and calls TableView.setItems(<results>). There are 3 pages and the user is on the 3rd page. Only 5 rows remain out of a possible page size of 20. The user decides to delete the 5 remaining rows on page 3 from the table/database. Now it would seem natural at this point to conclude that page 3 no longer exists and we would want to the user to return to page 2. If we simply call paginator.setCurrentPageIndex(currentIndex - 1) then we will correctly transition the user to Page 2, however Page 3 will remain displayed in the Pagination control and if the user browses back to that page, he is met with the "There is no content to display" label. So it would seem natural that we could presume this happening and instead call paginator.setPageCount(2), then paginator.setCurrentPageIndex(currentIndex - 1). That way the Pagination control reflects an accurate number of pages. Unfortunately, this results in TWO callbacks to the PageFactory method, one at currentPageIndex=0 and another at the correct index. Sometimes the widget that is constructed in the PageFactory callback (TableView) doesn't get displayed properly (disclaimer: speculation ahead) probably due to some asynchronous nature of the two competing callbacks (?).
I'm struggling to get a handle on this control. So far, my experience with TableView has been pretty good. I love the features you get with this Pagination control out of the box, but some of the choices that were made with regards with what APIs to expose confuse me. The frustrating thing about callbacks is that sometimes you can get caught in this callback hell where there are all sorts of callbacks being invoked and you don't really know why. Often times, the Javadoc does not indicate that there is a default listener being applied to certain property that may invoke one of these callback. I don't mean to sound like a rant. Overall my experience with JavaFX 8 has been very positive so far. I can usually always find a workaround if a come across a weird issue with an out of the box control. Worst comes to worst, I'll write my own Pagination control.
Thanks for your time.

For anyone else that may come across this post. I was able to find a workaround by simply using a field, boolean pageCountReset, and then bounding all of the logic in my page factory call back with a condition checking for this boolean value i.e. if (!pageCountReset) // continue, else // noop. Then, if I need to reset the page count, I set my boolean to true so that the page factory callback results in a noop. Because the pagination control under the hood will make currentPageIndex=0 (as I talked about above) if the page count is reset, I then have to be very explicit and either call my page factory callback manually to refresh the current page if it still valid, or I call pagination.setCurrentPageIndex(<new index>) so that the page factory callback will be invoked and pageCountReset will be false at this point, so I can successfully transition pages.

Greetings. Please tell me how much weight iPhone 4s in the box with all the accessories? I am interested in the weight of the smartphone box booklets all the accessories. Thank you.

Greetings. Please tell me how much weight iPhone 4s in the box with all the accessories? I am interested in the weight of the smartphone box booklets all the accessories. Thank you. (American adapter.)

I would google the question there doesn't seem to be any agreed weight and you will find plenty of answers all conflicting
Clearly no-one is coming up with an solution here

Tried purchasing iTunes music. Put in my apple id and password then i was directed to a 'Terms and Conditions' page. I checked the box then clicked the 'accept' button next page read 'your Session has timed out ' try again with a Done button to click on

Tried purchasing music from the iTunes Store. When the window popped up I put in my apple id and password. Then I was directed to a 'Terms and Conditions' page. I checked the box next to the 'Yes I agree to these terms and conditions' - then clicked the 'accept' button next page read 'Your Session has timed out. Try again.' with a 'Done' button to click on. Oh the same thing happens when i try to download free iTunes. Yes I have tried & tried it again I even logged off and singed back in-- no joy
After accessing my iTunes account I was not able to change anything like my credit card number when I tried and was sent right to the 'Your session has timed out. Try again.'
The last time I purchased any anything was on September 25th 2011 and the 'terms & conditions' page was last updated on October 12, 2011
Does anyone have an idea to what is going on with my iTunes version 9.2.1 (5) and I can not upgrade to a higher version my iMac does not have the intel processor chip.Thank you for your time and help with this matter. You are greatly appreciated

I am having the same problem also! I posted on here about it, but no one has responded with ideas. I called technical support and e-mailed them, the only suggestions they gave was for the to turn off my firewall. But I didn't change anything, so it shouldn't suddenly stop working. Maybe this is just an iTunes issue? But it doesn't even recognize my account anymore, and I cannot log in now.
If you happen to get an answer, will you please let me know what works for you?
Thanks!

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view. Also, when I go to enter a new event in google calendar, I now have to click the cursor in the box to type the event (it used to let me just start typing).

Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?

I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences

I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...

I purchased Photoshop cs5 a while back in disk form for my old imac. Now my new laptop doesnt have a disc drive... can I get the program onto my new computer? I don't have the box, but have the old computer it's on...
also had a friend place inD and Ai on my old laptop and am curious to know how to get it to my new one

As long as you have your serial number, you may download and install
OLDER previous versions http://www.adobe.com/downloads/other-downloads.html

Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

Hello SeamusFitz,
Thank you for using Apple Support Communities!
In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
iTunes will back up the following information
Messages (iMessage and carrier SMS or MMS pictures and videos).
This will help you backup and restore your device:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
All the very best,
Sterling

I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?

I just downloaded a video in HD, but I found out after the download was over my computer doesn't play HD videos. Is there any way I can return the video and get the SD version, or upgrade my computer so it will play the HD video?

From http://support.apple.com/kb/HT3209
When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases.

I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?

I recently downloaded a program ScanFont 5, When I try to open the installer I get the following message: "You can't open the application "(null)" because it may be damaged or incomplete. Is there any way I can get the installer to open anyway?

The message means just what it says. Remove the damaged copy and try downloading it again.
Edit: Looking at FontLab's page, there's two issues going on.
1) It's a PowerPC app and will not run on any version of OS X newer than Snow Leopard, 10.6.x.
2) The "workaround" they offer is to purchase the Windows version and then run it in the the open source Wine, Windows emulator.

There's no clip in the box to get the sim card holder out!

Similar Messages

Maybe you are looking for