There's no Logical Destinations Category in SM59

Hi all!
I'm helping out a colleague with some WF issues.
I have no system access so I have only seen screen dumps.
When running SWU3 problems arise on RFC step.
So I adviced her to do it manually and the redo SWU3.
After creating WF-BATCH user, the plan was to create Logical Destination WORKFLOW_LOCAL_XXX the problem is that there is no category for Logical Destinations.
This is a ECC 6.0 and I wonder has basis left out some steps or has this changed so the WORKFLOW_LOCAL_XXX should now be created as another RFC Destination Type?
//Roland

Hello Roland,
With ECC60 you can still create logical destinations. The type for an RFC destination is defined by the Domain RFCTYPE and it lists 'L' as a possible value.
If I go to SM59, click on the Create icon in the application toolbar, put in a description and select 'L' from the F4-help for the connection type, I can create a logical destination without problems.
Hope that helps,
Michael

Similar Messages

Connection check for logical destination for type "G"

Hi,
How to check the connection for logical destination of type 'G'.
Best regards,
Saurabh

Hi,
In our case we are creating the logical destination in sm59 (ztest_logical) with type 'G'.
We need to check the connection exists or not .
so is there any standard function module to check the conenction .
Best regards,
suman puthadi

Using XI WebService in CAF as external service with Logical Destination?

Hello,
I created a scenario WebService -> XI -> WebService in a PI7.1 system. I used the Web Service Wizard in order to generate a WSDL. If I test it for example in XMLSpy it works fine.
We then imported this WSDL into CAF as external service. That also works.
Now we have to map the CAF Service to a logical Destination. This has to be maintained in NWA. But here we need a URL to the WSDL. I cannot use the local WSDL Filed which I from that WebService Wizard.
Is there any generic URL were I can get the WSDL for the WebService which calls the XI Interface?
Thanks and Best Regards
Katharina
Edited by: Katharina Seiz on Oct 6, 2008 6:19 PM

Good Idea. I tried that. I added the WSDL to a Web Module and deployed it with the CAF ear module. It is now available via: http://vmw2469.wdf.sap.corp:50000/testxi/GLAccountPostingSync_Out_PI71.wsdl
If I test it directly in WSNavigator it works fine, but if I map my CAF Service to the logical Destination which is also using that URL, I get the following error:
com.sap.engine.services.webservices.espbase.query.exceptions.TechnicalException: Deserializing WSDL stream http://vmw2469.wdf.sap.corp:50000/testxi/GLAccountPostingSync_Out_PI71.wsdl failed
If I try to find the service via the function "Search by Logical Destination" I get the following error:
Invalid content type while requesting http://vmw2469.wdf.sap.corp:50000/testxi/GLAccountPostingSync_Out_PI71.wsdl. Expected Content-type: text/xml, received Content-type: content/unknown, used user to connect: most
Has someone any idea what the problem could be?
Thanks and Best Regards
Katharina
Edited by: Katharina Seiz on Oct 6, 2008 6:32 PM

Regarding Logical destination problem.. urgent please

Hi gurus,
I am facing one problem in printing credit memo from vf02,
when i give one logical destination( means printer ) for example A its working fine., if i will give apart from A printer, outout could not be issued giving this information, if i will give LOCAL printer LP01 then also not working....
i have seen all confugaration also there they local printer only..
print privew is coming to all printers( logical destinations)
but print is not coming..
Regards
Nagu

Hi,
You have to write in form calc under form ready event.
As of now, i dont have any system to check.You can check any standard forms like vendor statement / customer statement which have page totals.
for example, drag the S1 subform into one more sumforn with flow content say SS1.Write the below (similar) code.
// get total number of records
Var record_count = $.Table1.data.all.length
Var flag
Var value_check = '222'
For I = 0 upto ( record_count - 1 ) step 1 do
if $.Table1.data<i>.field1 = = value_check
flag = 'X'
endif
Endfor
if flag = = 'X'.
$.S1.presence = "hidden"
endif
Please check the syntax.
pavan meda

Scheduling a FM as background task in a new logical destination.

hey all,
I want to run a FM in background in a new logical destination. i've seen the syntax but can anybody give me an example of a logical destination. if possible, a sample code.
thanks and Regards

Ravi,
Destination is something that you create in SM59 transaction. This is where you specify where the system is and what are the logon parameters.
So, you need to look into SM59 and find out what is the destination.
CALL FUNCTION function_name DESTINATION 'SAP_SYSTEM'.
SAP_SYSTEM you should find it in SM59
Regards,
Ravi
Note : Please mark the helpful answers

Destination category in table J_1BAPN(CFOP determination)

Hi can some one pl explain me from where and how system picks up destination category (J_1BAPN-DSTCAT) while determining CFOP for country Brazil?
Thanks and reg
Siva

As far as I know it is hardcoded. But the logic used to determine this field is the following:
SAP gets the following information to decide: Plant, region and jurisdiction code of the plant and ship-to party.
And then makes the following comparisons:
u2022         If the country of the plant is different from the country of the ship-to party = 2 different country
u2022         If the region of the plant is different from the region of the ship-to party = 1 different state; BUT
                  o   If the jurisdiction code of the ship-to party is u201CFree trade zone = tax free zoneu201D (flag in the region table @ Brazil>Define Brazilian Tax Regions and Assign to Geograph. Regions
) = 4 different state u2013 FTZ
u2022         If the region of the plant is equal to the region of the ship-to party = 0 same state; BUT
                o   If the jurisdiction code of the ship-to party is u201CFree trade zoneu201D = 3 same state u2013 FTZ
I hope this will answer your question, please give points

WebDynpro AWS logical destination against UDDI

Hi Experts
as we know, in design time we can refer to UDDI to import adapative web service model. However is it possible to configure AWS logical destination against an UDDI registry? I know there are two ways to configure logical destination, one is against WSDL, the other is against WSIL. My client wants to point the logical destination to their UDDI registry, instead of WSIL, is it possible? If yes, how?
THanks
Jayson

HI jayson,
it is posible to configure logical destinations for UDDI registery.
please refer the following link http://help.sap.com/saphelp_nwce10/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm

I want to import photos onto my ipad3. it shows up as a device in itunes but there isn't a photo category listed. it shows music, movies, books and purchased. am i doing something wrong. thanks

i want to import photos onto my ipad3. it shows up as a device in itunes but there isn't a photo category listed. it shows music, movies, books and purchased.
how come photos doesn't appear?
i went to itunes help and followed instruction from "add photos to ipod, iphone or ipad"
i'm confused! please help
thanks

thank you. that worked but i do have another question. i was able to import photos as you instructed but i had to import the whole album. how do i import only one or a few photos?
thanks again

Logical destination for xi web services

hello,
i have some wsdl files that were generated by xi. i want to use adaptive web service model to call them. what is the logical destination i should put in visual administrator ?
thanks

Hi Eyal,
Go through this document.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f07de95b-d81c-2a10-3daf-96172e846d00
Use the WSDL, userid and password of your XI System.
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/11703e5da3e946e10000000a114084/frameset.htm
Regards,
Mithu

Defining logical destinations for webservice

hi
i am trying to consume a webservice which has been
generated from RFC ( rfc as webservice ) ,
i have copied the WSDL file on the local machine ,
got the URL from the SOAMANAGER transaction code ,
iam working EP 7.0 SP15 and NWDS 7.0.14
when i am trying to import the webservice using
adaptive webservice model , and deploy the application
with out using the logical destinations , iam facing a error
called cannot find the path of the WSDL file location
how can i use Logical Destination for Adaptive webservice
or webservice deprecated version with the landscape i have
can any one plz help me ?

hi
i have gone through the document and
i have provided the Destination name MyWSDestination
in visual administrator , and i have used the
adaptive RFC model where i have created two destination
the default destinations , for metadata and execution
but was unable to solve the issue .
can any one please help in creating the destination in the
visual administration and the also in NWDS.
should both the destination names be same .
and the paramaters to be provided the visual adm. to create destinations
please help me out ?

Table for logical destination

hi,
logical destinations are defined in which table

Check the table RFCDES Destination table for Remote Function Call
The table RFCDES describes logical destinations for remote function calls (RFCs)

Change the name of logical destinations after import Adaptative WebService

Hello Everybody,
I import two Adaptive Web Service in my application with the same names for the logical destinations ....
How can i change the name of destination after import a model ?
Thanks
Rodolphe.

OK i found ...
- Properties editor selected on the lower right
- Then i select any class from my model and right click edit

Difference between logical destination & output devise in Purchase message

Hi all,
I defined a printer determination per printer for a condition type used in the ME22N transaction via OMJR or NACE : printer A
I defined a another outputdevice in the SU01 transaction : printer B
When I print condition type in ME22N, the logical destination from the communication method displayed is printer A.
But when I open the SP01 transacation, the output devise is printer B.
Why logical destination from ME22N and output devise from SP01 are different ?
How can I make sure logical destination defined in OMJR or NACE will be used in SP01 ?
Thank you
Pierre

Thank you,
basically we had to change smartform, the code said il has to be printed in logical destination defined in SP01.
So, we changed it and now MN04, MASS, OMJR transactions works.
Pierre

Logical Destination/Service Group for Enterprise Services

Hi,
we have a Discovery System V3 and published the Services into the Services Registry of a seperate CE 7.1 installation. Now when I create a NetWeaver BPM process that calls an Enterprise Service from the discovery system I have to specify either a logical destination or a service group.
I know that they are used to configure Web Services (authentication, etc.), but do I have to use them for Enterprise Services delivered by SAP? I thought they are ready-to-run???
Thanks,
Manfred

Yes, we have to use either logical destination or service group. This complies with the new configuration approach of SAP ESOA which is described here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3.

Strange Problem with creating logical Destination

Hello experts,
I have a really strange problem. I have created some AS and BO and deployed all web services. The problem is - where can i register the logical destination. Normaly the button should be under:
NWA->Configuration Management -> Infrastrucure (SP1)
But now I am using SP3 and I can't find the Button for WS Destinations. Is this now managed from another Button or is it not longer neccessary ????????
How can I than integrate my operation from the BO in a Visual Composer DC.
Thanks a lot
Regards
Marco

hi,
you could try the nwa > SOA Management > Destination Template Management >
best regards,
v s

There's no Logical Destinations Category in SM59

Similar Messages

Maybe you are looking for