There software for net gear PS121 usIsb print server? Just purchased Macbook pro and have Netgear wireless printer router

Is there software download for net gear PS121 usb print server? Just purchased Macbook pro and have Netgear wireless printer router that has worked well for years on windowns. I have searched with minimal results

Check with NetGear for Mac OS X Lion driver/software.

Similar Messages

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • HT200246 I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE.  HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

    I JUST PURCHASED MOTION 5 AND HAVE NEVER USED IT OR ITS PREDECESSORS BEFORE.  HOW CAN I GET A LESSON GUIDE FOR HOW TO USE THIS SOFTWARE?

    There are a number of resources.  You might want to start with:
    The User Manual:
    http://help.apple.com/motion/mac/5.0/en/motion/usermanual/
    This Thread:
    https://discussions.apple.com/message/22833760#22833760
    or just do a google search, that should bring up plenty of tutorials from around the web.
    Cheers!

  • I've just purchased an ipad2 and have synced it with outlook to get all contacts.  I've also set up my earthlink mail account and it sends/receives fine.  IS there a way to sync it so I get all of the legacy emails sitting in the OUtlook inbox?

    I've just purchased an ipad2 and have synced it with Outlook to get all contacts, etc.  I've set up the mail account and it is working just fine.  The sync doesn't pull over legacy emails from Outlook and my Outlook has been set up to remove them from the webmail server therefore they aren't available from webmail anymore.  Is there anyway to pull them over to the iPad? 

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • New to macbook pro and have msmoney files (mbf) stored on an external hard drive. I want to transfer them to MoneyWiz and need to convert them to qif.  Does anyone know of any free software available and how do I do it. Thanks.

    I am new to macbook pro and have msmoney files (mbf) stored on an external harddrive.  I want to transfer them to MoneyWiz and need to convert them to qif.  Does anyone know of any free software available and how do I do it. Thanks.

    iTunes>Preferences (Cmd+,)>Advanced
    Choose the Ext HD (and the appropriate folder) as the location for your library.

  • I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this?

    I am using a MacBook Pro and am trying to print double sided copies on the HP Deskjet 3054 that came with it. Can anyone tell me how to do this? I am a total MacBook nube and can use any help you may offer! Thank you so much.

    How you enable double-sided printing can depend on the applications from whick you wish to print. Example: if I print to my HP PhotoSmart  from Safari, I get this print dialog box:
    (Edit: OOPS! Note that I forgot to switch printers when i took the scene-shots, so ignore the "Brother" reference. It's should look the same for your HP.
    Note the selection labled "Safari" near the bottom. If I change that form "safari to "Layout: I get this:
    Note the option for two-sided printing appears for your selection. If I print from Word, the box is different:
    The "Copies & Pages" option can be changed to "Layout" when you click it, again allowing the selection of two-sided printing.
    If you tell us what applciaiton is vexing you, we may be able to give better-focused information.
    A

  • I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  Any ideas what is causing this?

    I have an email account causes the machine to hang up after being in use for a day.  It only occurs on my Macbook Pro and only one particular account.  The problem account works fine on my iMac and Windows Machines.  I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem.  I have used this account for years.  Any ideas what is causing this?

    No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well.  That will tell you if it is something wrong with your main User, or something wrong with MBP.
    Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
    Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library....   Hard way to get it to work, but just my idea.

  • MacBook Pro and Dell AIO 948 Printer!

    Hi,
        I have a new MacBook Pro and I am trying to connect it to my Dell AIO 948 printer. However, I know Mac and Dell are not compatible and I know I have to download some sort of compatible software, but I have no idea where to begin with that! Any help would be greatly appreciated! Also, I need to get this connected as soon as possible! I am a college student and I already have homework that needs to be printed!
                                                 Thank you in advanced!

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    -Griff W.

  • Printing from macbook pro and iPad using same printer

    Have a macbook pro and an ipad. Can print from either using my epson XP-310 but not from both without resetting settings for whichever device I wasn't printing from . Is there a way to set up my Epson 310 wifi so it can see both devices and let either ipad or macbook pro print vs having to switch settings back an forth?

    Welcome to the Apple Discussions!
    In the Finder go to Help>Mac Help. Select the Index, upper right. Go to S>Sharing printers. You will find instructions for configuring Macs and PCs for printer sharing among the articles available.
    Dah•veed

  • I have a Macbook Pro and a HP 5510 printer. And suddenly a problem printing.

    I have a Macbook Pro, fully updated et cetera, and a HP 5510 printer, with all the updates as well. When I lived in my old place, I never had a significant problem getting the computer and the printer to work together. But I moved in January and even since then I haven't been able to successfully print anything. I've run every diagnostic on the printer, and it is connected to the right wireless network. The macbook pro is connected to the same wireless network, but will not connect to the printer.
    Of course at first I blamed it on the printer, but since January I've been trying everything - I even got a friend to bring over her Macbook pro, and it connected and printed just fine. So obviously this is a problem with the computer.
    So what can I do?
    Terribly sorry if this has been answered somewhere else, but I've been searching and no one that I've found has the same, or similar enough, situation going on.
    Thank you, and help me please!

    Care to share which OS you are using? 
    What to do when you can't print 

  • I have been trying to update my software for the past 3 hours. It just goes so far and stalls. I've never had this problem before, what am I doing wrong?

    I have been trying to update my iPad2 for the past 3 hours. It just sets there doing very little and says its going to take 9 hours.  What am I doing wrong?  I've never had this problem before.  Also can I update from any other computer? Just in case it is my lap top.

    Do you get any error messages ? If you get a network timeout error when downloading the update then try temporarily turning off all your firewall and antivirus software until the download has completed.
    It's best to only update via your own computer, otherwise you risk losing all your iPad's contents - updating to iOS 5 wipes the iPad and then restores your backup. If you having problems downloading the update then you could try downloading the update file via a browser on another computer and then copying that file to your laptop for the actual update .

  • Downloaded latest Reader for Mac and have had wireless printer problems.  Either can not printer or it is extremely slow.

    I downloaded the latest Adobe Reader for my Mach and I have a wireless Canon Printer.  I have not had any problems with my printer until now.  It will either not print or print really slow.  Can not print any pdf files at all.  Do I need to uninstall it or is there a fix?

    Uninstall Reader. Is your printing back to normal? What version of Reader did you install under what OS?

  • MacBook Pro cannot connect to wireless printer

    I just replaced my printer with an HP Photosmart plus e all in one B210. I set it up and it connected to my network and prints fine from my PC. When I installed the software on my MacBook, it is able to find the printer, but after installation is complete it is unable to connect. I have checked the HP support page but it appears I have done everything correctly. I am assuming there is a setting or two that I need to tweak but I cannot figure it out. I have turned off firewall, and all devices are connected to the same network. Any suggestions would be greatly appreciated.

    Apparently my original post was not clear enough. The printer shows up in Print&Fax under System Preferences as idle with a green dot. I have tried with "share this printer" selected and printer sharing turned on but still does not connect. The printer works just fine with my PC connected via ethernet to a dual band Airport Extreme. I have installed/reinstalled the software several times and the printer says it has the latest firmware. I am also unable to utilize the AirPrint feature with my iPhone 4 running 4.2.2.

  • Printing problems with new Macbook Pro and Canon I9900

    I would like to know why my printed output on the Canon I9900 is showing up much darker than the image shown on the screen. I have installed the latest driver from Canon and am still having this problem. I have tried the different Colorsync profiles listed for the Canon and have not seen any improvement. I am using 4x6 matte paper by Kodak and have selected the correct paper type and settings.
    Macbook Pro   Mac OS X (10.4.8)  

    Hi there,
    I would like to know why my printed output on the
    Canon I9900 is showing up much darker than the image
    shown on the screen.
    The answer to your question is simple; colour on a monitor is made differently than colour on a printed image. Monitors combine Red, Green and Blue (RGB) in a process called Additive colour while printers use Cyan, Magenta, Yellow and Black (CMYK) with a process known as Subtractive colour. The matching of what you see on the screen to what you get printed is a time consuming (and expensive) process and often subject to a users preference.
    For the home user this process is often too complicated. If you accept that what you see is not what you will get then half the battle will be won. However, that doesn't mean that you cannot get good output on your printer. A number of applications give you the ability to adjust your output. You just need to experiment with a number of settings to get a 'workflow' that you prefer. If you can tell me which application you are using to print from I may be able to offer some values that will help.
    Paul

  • How do you print email document from ipad2 . I have a wireless printer ,canon. No AirPrint message . Is this being blocked by Apple iOS ?

    Why blocked from printing with wireless computer ? Only pics , no email documents . I have a canon pixma mx 439 . Error message no AirPrint found ?

    About PIXMA MX439
    See Other PIXMA MX Series
    Average Rating2.6
    Read all Reviews (10) Write a Review
    Wireless Inkjet Office All-In-One
    Item Code: 5783B023
    Estimated Retail Price: $99.99†
    Overview
    What's in the Box
    Brochures & Manuals
    Wireless Help
    Features
    Supplies & Accessories
    Drivers & Software
    Fax Help
    Specifications
    Service & Support
    Reviews
    Wireless Help
    Apple AirPrint:
    AirPrint allows users to wirelessly print photos, emails, web pages and other documents without the need to install device drivers, saving time and making for a seamless user experience. Both your Apple device and your PIXMA Wireless All-in-One must be connected to the same wireless network connection.
    A firmware update for the printer may be needed to support AirPrint. You will need a PC (Mac or Windows), a USB cable, Firmware utility (download from our site) to perform this update.
    Click on the specific topic below to get detail information.
    - What is Firmware?
    - Check if the AirPrint Firmware Update is Necessary
    - What is Needed to Perform Firmware Update
    - Firmware Update Procedure
    - How to Print Using Apple AirPrint
    - Delete the Additional Printer Listing
    - Firmware Download
    - AirPrint Video

Maybe you are looking for

  • Check box in flex

    I have a check box and a label related with it which I want to appear when the user checks the check box.... <mx:Label  x="10" y="76" text="Information" fontWeight="bold" fontSize="11"/> <mx:Label x="366" y="76" text="Record - New/Existing" fontWeigh

  • T61p 6460 74M - Client Security Solution Problem

    I am having problems with the Client Security Solution running under Vista I am able to log in OK using the fingerprint reader or password however after the system boots the CSS widow appears asking for password, I enter the password but it does not

  • Link between COPA and FI documents

    Hello, I am working on one object in which I am selecting records from CE1NROC table based on some selection criteria and posting these records using FB01 transaction. The requirement is - There should not be any duplicate posting for the Sales Order

  • No High-End Recording into SB Live Val

    I am recording from radio into SB Li've Value by connecting a cable from the headphone jack of stereo into the mic input of the SB Li've (going into "line in" results in too low volume). The recording works great. The resulting playback of the record

  • Can i compile new procedures/packages on my snapshot standby?

    Hi can i compile new procedures/packages on my snapshot standby? I need to test the new release of the application, which include some changes to current packages thanks