There us to be a "script" for ticket numbering. What happened to it?

In InDesign, there use to be an available "script" for ticket numbering. (Multi tickets on a page and several pages, that I could arrange to be cut in stacks and retain their order.) I use to use it in CS5 and CS6... but when I went to CC the script is gone. I think it was a third party "script". Please help. I need it soooooooo badly.

Hi Peter,
What you say is what you want !
So, make a master page as :
And launch this clever [JS] written by Jared Katz. Define your settings and "OK".
Done!
page 1…
… to last page!

Similar Messages

An attempt to install Adobe reader X on my Mac OS 10.5.8 failed, with this message: "Run preinstall script for application." What is that, and how do I do it?

An attempt to install Adobe reader X on my Mac OS 10.5.8 failed, with this message: "Run preinstall script for application." What is that, and how do I do it?

Hi renmusn79002737,
Could you please try installing Reader again from the below mentioned link:
http://get.adobe.com/reader
Ensure that you are logged in as administrator and anti-virus is disabled as that might interrupt downloading.
Try again and then let me know.
Regards,
Anubha

HT1751 All of my songs have exclamation points (!) next to them but when I go to my iTunes media folder to find the files, there is nothing in the folders. Any idea what happened and how I can get my music back?

All of my songs have exclamation points next to them but when I go to my iTunes media folder to find the files, there is nothing in the folders. Any idea what happened and how I can get my music back?

I wish I could help. There are numerous threads about missing music but last I looked, no solution. You might want to read through them anyway.

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the Mac?
How to reset iPod
Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in iTunes and Mac desktop
B-rock

Scripting for different numbers of table rows in cs3

As always thank you for the help.
My question: is there a simple newbie way to script for stroke placements when the numbers of rows in the category between the stroke will vary. I have not even attempted to script this style, as frankly I don't know where to start, but here is an explanation of what I need:
The table foodstuff contains:
animal, vegetable, fruit
Under animal there is:
beef, lamb, pork, poultry
Under vegetable there is:
potato, pepper, onion
Under fruit there is:
orange
If wanted a line under each category, ie after poultry, after onion, and after orange how would I go about it.
Thank you to all who have helped me so far, either by reading answers to other people's queries, or by responding directly to my own

Interesting ... I don't think there is a newbie-level answer to this challenge. It comes down to finding the first (left-to-right) cell that contains text, and adding a line on top of it all the way to the last cell in that row.
Here's a first attempt:
table = app.selection[0];
if (table.hasOwnProperty("baseline"))
table = table.parent;
if (table instanceof Cell)
table = table.parent;
if (table instanceof Column)
table = table.parent;
if (table instanceof Row)
table = table.parent;
if (table instanceof Table)
table.cells.everyItem().properties = {topEdgeStrokeWeight:0, bottomEdgeStrokeWeight:0, leftEdgeStrokeWeight:0, rightEdgeStrokeWeight:0};
table.rows.lastItem().bottomEdgeStrokeWeight = 1;
for (r=0; r<table.rows.length; r++)
for (c=0; c<table.rows[r].cells.length; c++)
   if (table.rows[r].cells[c].contents)
    for (; c<table.rows[r].cells.length; c++)
     table.rows[r].cells[c].topEdgeStrokeWeight = 1;
    break;
} else
alert ("You were supposed to be somewhere inside a Table");

Is there a FM imbedded link used for phone numbers that in a pdf file activates the number on a smart phone?

When I use the URL hypertext function and type in mailto:<email address> and save it as a pdf. When bringing the pdf up in a smart phone and tapping on the link, it will bring up email to that person. Is there a FrameMaker version that also does this for a phone number and what is the text that needs to be typed in? Any assistance would be greatly appreciated!!!

What happens when you use Marker Type: [Hypertext]
and a URI of form:
message URL tel:1234567890
In a quick test, this survives to PDF as hypertext, gets handed to my default browser, which (being a desktop machine) throws a dialog saying, in effect "Just what am I supposed to do with this? I'm not a phone you know." My phone, on the other hand has two PDF readers (Kindle and some shovelware office ap), neither of which appear to even notice the URL (which I take to be not FM's fault).
The hand-off to email is not something that FM (or Acrobat) does per se. As far as I know PDF readers merely hand the URI to the host operating system. If the host knows what a "tel:" scheme name is supposed to do, it gets done. For a more or less complete list of scheme names, see the wiki page.
Be sure to use fully qualified international dialing numbers.
And be sure to avoid mistake 0 of FM hypertext markers: in addition to inserting the marker, it has to be within the scope of a unique Character Format applied to the text string to be made active. This tag doesn't even have to apply any visible effects, but it does have to be there, as it's how FM determines the boundaries of the hyper region. A Character Format set to Family:Default ¶ Format (and all else blank or As-Is), named "URI", would suffice.

Script for converting numbers?

Hi guys,
Do you know how to make a script to change numbers between parenthesis in superscript without the parenthesis? The author send me the texts this way I have made a Character style of the Superscript but still and it a bit time consumming changing them one by one all the time.
I have an image which explain it better.
http://www.pixentral.com/show.php?picture=1vNdYe7ciMEbwqbUWAIrmPY0Gh4a8
Thanks for any help or info. I would really appreciate it
Cheers,
S

Use GREP Search and replace (Find/Change dialog):
Have fun

Disk Utility has been trying to make a partition on hard drive for 5 hours what happens if I stop it

I have bee trying to make a partition on my mac Book Pro hard drive with disk utility. It says it is modifying partition map for 6 hours now, What happens if I stop this?

gaborneo wrote:
I don't want to erase my whole drive.
Your only erasing the Free Space of your OS X partition, meaning the areas where there is none of your data stored.
Because when Bootcamp works it's going to take some from that to create the Bootcamp partiton for Windows.
If I choose erase does it then give me the option before I press something else and wipe out what I don't want to wipe out just yet?
If you click Erase Free Space it give s a option and then you go.
My dvd player is bust and at the moment...
Well how are you going to install Windows and the drivers?
You didn't read the Bootcamp manual did you?
https://www.apple.com/support/bootcamp/
IMO, your not up to doing this, I advise you to stop and forget about installing Windows, because your problems are only just started.
Good Luck

I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks. Ricco

I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

A friend bought second hand macbook air mid 2011 with crossed circle on the display, we tried recovery from partition and same thing happened, after internet recovery it stays the same except now it asks for password for boot option, what happened?

A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

When I sync my 3rd gen nano, there is no longer a games option tab. What happened?

Every time I sync it, there's no longer any games option, and I can't figure out what happened. Anyone know how I can fix it? Should I just try to restore it?

It seems as though since Apple removed clickwheel games from the iTunes Store, they have also removed the ability to resync games you had already downloaded previously over to your device.
B-rock

Is there a way to use hyperlinks for phone numbers in keynote?

Hey all,
does anyone know if it is possibile to export phone numbers as hyperlinks in keynote (export format: pdf), so that my phone directly dials the number if I open the pdf and click on it. In other programs I can use "tel:+countrycodeandphonenumber" instead of the url in the hyperlink setup, but unfortunately that does not seem to work with keynote.
Best,
Hanna

Keynote provides for hyperlinks to slides in the currently used presentation, other Keynote files, web pages and to launch a pre-addressed email message. All other hyperlinks are prevented. Not sure why you would want to use a slide presentation application for such a task during a slide show.

I have a new mac and was in launch pad and deleted imovie by accident because it was showing two copies. I have not emptied my trash, but imovie is not in the trash nor is it anywhere when I search the computer for it. What happened? Where is it?

I just got a new macbook pro. I was in launchpad and there were two imovie icons so I clicked on one and deleted it.
It seems as though imovie is missing from my computer completely now. I have not emptied the trash, but it is not in there.
Where has my imovie gone and how do I get it back? I don't understand why it isn't in the trash or anywhere on my computer.
Please help

Hi wjosten,
Yes, I have checked the app folder and there is no imovie in there, there is also nothing in the trash.
I have also checked the HD for imovie and it seems as though it's just gone?
Thanks for your help, if you have any other suggestions I would really appreciate them.

There is a question mark through the iphoto app. what happened? how do i get my app to work again?

is there anyway to get my iphoto app goin without buying a new one? I didn't delete anything that would make his problem.

Is the iPhoto application in your applications folder? Launch it and right click on the iPhoto icon in teh dock and select keep in dock
If it is not then you (or someone) has deleted it - look in the trash - if it is there return it to the applications folder - if not reinstall from the disks that came with your computer -
reinstall iPhoto - go to your receipts folder ("Your hard drive" ==> library ==> receipts) and remove any iPhoto receipts and reinstall from the restore disks that came with your computer - do a custom install of bundled software only
For more information <a href="http://www.macworld.com/article/132243/2008/02/pacifist.html"> click here for the MacWorld article on reinstalling OS X applications.</a>
LN

Cineform and other 3rd party plugins for Creative Cloud, what happened to them?

Hi I don't want to panic but I just downloaded Adobe Premiere CC and it's telling me that I've rendered my previous project with a 3rd party plugin that isn't available. What is the process of installing my 3rd party plugins to premiere so I can edit with Blackmagic codecs, Cineform, and multiple others I have enjoyed using in CS6.

I followed the instructions from the Cineform site as given by scarolan_CS4 (thanks for that).
http://support.cineform.com/entries/24336007-A-Do-It-Yourself-Guide-to -adding-CineForm-support-in-Adobe-CC-Windows-
Works like a charm.
The only issues I have are:
Cineform plugs (except for levels) don't work. But they didn't work on CS5.5 and CS6 either - plus cá change.
I'm getting the 'saving metadata' when closing PP error back - I'd forgotten how I'd dealt with that, switched something off in prefs, if I remember (more internet searching!) This wasn't happening before I copied the Cineform directories to their CC locations, so I suspect it's related in some way.
The editing presets and the rendering presets all work fine.
======================================
I've also had good luck with other 3rd party plugins. I created a junction type link from C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore to C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore. The default mediacore directory is empty so this works, but I copied across 3rd party directories and files in the individual plugin folders for PP and AE as there are default Adobe files in there which may be different from CS6 to CC.
Note that I also created a junction from Photoshop 64 plugins for CS6 to CC and this also works a treat.
Just thought I'd mention it to show that it can work, I'm chuffed that it does as I was anticipating a system OS install to enable plugins to work and to keep 15-20% of my system SSD free.
If this junction stuff is too complicated (and you don't mind having two sets of the same files or deleting the older versions) just copy the plugin and relevant settings files instead. I assume this will work, although I haven't specifically tested it myself.
You can find free utilities to create junction links for Windows or this can be done via the command line. I forget the name of the utility I use, it works via the context menu. I have found that junction tends to work better than symbolic linking or other types of file 'aliasing' for most of my fumbling about with this solution.
This stuff sounds more complicated than it is, once someone has given the steps to take and you have installed the junction/symbolic linking utility it's just a matter of following the steps.
EDIT - I (re-)found the solution to the
Metadata. Metadata writing in progress (n files pending)
error -
Go to Edit>Preferences>Media and uncheck Write XMP ID to Files on Import (thanks to Jim Simon on this forum for this).

There us to be a "script" for ticket numbering. What happened to it?

Similar Messages

Maybe you are looking for