There Was a problem instaling Symbian Belle on my ...
pls help
Solved!
Go to Solution.
Hey armandocilaj
Welcome to the forum!
Connect your phone to your PC using Nokia suite (current version), go to updates 'tab'. From there you can see re-install option. (written in small letters)
We are here to help.
Regards
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.
Similar Messages
-
There was a problem installing this update. Super-drive
There was a problem installing this update.
Quit all applications and re-upgrade. If the problem persists, please contact customer support from Apple.
How do I upgrade?Thank you for the tip. The link you sent me with the optical drive is for my model? Did you installed? We could install the driver as well? If you could ever give me the link to the demonstration of the installation DVD drive was great.
Thank you very much
Equipamento:
Modelo: MacBook Pro
Identificador de modelo: MacBookPro5,1
Nome do processador: Intel Core 2 Duo
Velocidade do processador: 2,4 GHz
Número de processadores: 1
Número total de núcleos: 2
Cache L2: 3 MB
Memória: 4 GB
Velocidade do BUS: 1,07 GHz
Versão da ROM de arranque: MBP51.007E.B05
Versão de SMC (sistema): 1.33f8
Número de série (sistema): W885143Q1G0
UUID do hardware: 73DE0D11-002A-508B-8352-7AF4573DB3C7
Sensor de movimento:
Região: Activo(a) -
i install mac lion but not complite if i want install again i have message there was a problem installing mac osx
i install mac lion but not complite if i want install again i have message there was a problem installing mac osx
-
Crucial M4 SSD MBP "There was a problem installing Mac OS X" Try Reinstalling
So I have an extra ssd. I decide to put it in my MPB mid or late 2009 to give it some extra life.
I am doing a fresh install from a thumb drive. The macbook find the partition and boots into the installer. about 10 seconds into progress bar this appears: "There was a problem installing mac os x" Try reinstalling.
The progress bar goes away.
The thumb drive is good... it installed on my mother's laptop just fine.
I have the ssd in the place of the old Hdd until my adapter comes around to put one of them in the opti bay.
Does anyone have any ideas or has seen this before?I forgot to mention a fresh mountain lion install. The M4 has latest firmware as of today.
-
There was a problem installing "Mac OS X" - Try reinstalling
Hi there,
so, i downloaded Lion and made a copy of the Install pkg to install it on multiple devices.
It worked without any problems on a new Macbook Air, an old aswell as a very old Mac Mini.
However on a 15" MBP i7 with 500GB SSD it completely messed up.
it gave the above error message
Only option was to reboot.
The system hung for 30 mins after which I shut it down.
I then proceeded to make a "clean install" Disk and Stick to reboot.
After booting I went into Diskutility and erased the Harddisk.
Funnily enough after another reboot the same error message came up.
Don'T know what to do.
currently restoring from the time capsule...I forgot to mention a fresh mountain lion install. The M4 has latest firmware as of today.
-
Despite English selected, I get "There was a problem installing Lightroom..." while installing 5.3
Found the announcement and KB-article [1] + other posts on the topic, but my problem is slithgly off;
I see in the Adobe Photoshop Lightroom 5 5.3 12-30-2013.log that the MSI issue happens:
Install MSI payload failed with error: 1624 - Error applying transforms.
Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1624
My Adobe Creative Cloud app has "English (International)" set as the app language, though.
Any hope for me to complete the upgrade?
[1] http://helpx.adobe.com/lightroom/kb/error-installing-lightroom-53.htmlGot excellent help from Dilip on Adobe chat!
Trick was roughtly;
Sign out of and close CC
Empty temp folder (run -> %temp%)
Sign back in to CC
Restart LR-install, it will fail again. Don't touch
In temp-folder, search for sub-folder called Lightroom_5_CCM_LS1_win6, with the file Adobe_Lightroom_x64.msi in it.
Execute install from mentioned file - that works (should work, and did for me) OK
Sign out and close CC
Sign back in -> now Lightroom 5.3 is listed as installed and up to date!
Thanks a lot, Dilip! -
"There was a problem installing Photoshop CC (2014)" error for a year
I've been trying to install Photoshop for over a year (haven't really needed it yet, and now I do), and get the same error every time.
It gets through about 45% of the download (always the same percentage, roughly), and then gives up and says "Installation failed--learn more."
When I click on the learn more link, I get a web page saying exactly:
<<
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.3_AdobeCameraRawProfile8.0All 8.0.0.15 {3E2A282C-3E78-44F4-AB5F-021300B2CEE0}' information not found in Media_db.
>>
It's always this same error.
I've had this error since the pre-release, and I suspect it has to do with being part of the pre-release program. (We're an Adobe plug-in developer, a Silver Partner--been developing plugins since before InDesign 1.0 shipped.)
Yes, I've uninstalled the Creative Cloud and re-installed a couple of times, from scratch. I've also tried the Cleaner, which hasn't helped.
I'm now officially stumped.
Can someone from Adobe help fix this?I do not work for Adobe... you need to contact Adobe... try the chat link I posted
>do this to 300 Macs
Are you using the enterprise installer?
Team Installer http://forums.adobe.com/thread/1363686?tstart=0
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
And, some Mac links that may help
next link says After Effects, but check YOUR permissions !!!
-http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
-Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
-and https://forums.adobe.com/thread/1507936 -
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?
Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?
-
Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen
Just restore your bootable backup/clone or Time Machine backup.
-
I have an Iphone 4s 32gb and i'm trying to update it to ios 5.1. i've downloaded the software from itunes but when i click on it to install it to my actual phone it says: "There was a problem downloading the software for Iphone 'Donnbjj1's Iphone' . An unknown error occurred (1480)."
iOS: Resolving update and restore alert messages
For error -50: See error 13 and 14:
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server. I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
Help!Installed OSX 10.9.5 on three MacBookPRO's now all of them have lost access to our Windows 2003 Server. I get the message "There was a problem connecting to the server "SERVER". Note this was previously connecting with 10.9.4.
I understand 10.9.5 was giving us improvements in the reliability of SMB2 but this is now much worse.
Help! -
since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?
A Davey1 wrote:
Not a nice answer!
Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
You're ignoring context. On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers. The new Apple Support Communities made things worse by introducing certain inefficiencies. Then came Lion. The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest. (2) When applicable, give a brief answer such as the one that you found objectionable. (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems. I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there. Even doing that, what I posted saved me time that I could use to help someone else.
The people helping here are all volunteers. None of them is being paid for the time they spend here. They all have a life outside of Apple Support Communities. It's arrogant of you to demand that people helping here spend more time than they already do. -
I removed chrome 10 and newly installed FF4 final, and I can't read PDF files within the browser. There was no problem in Chrome. I can't even see the acrobat reader plugin in the plugins page. Acrobat 10 is already installed in my PC. Every time I try to read a PDF file on the web, FF tries to download it instead.
As recommended above by Bernd Alheit, I posted this on the Adobe Reader forum. There, I received the advice to repair the installation under the help menu, which I did and it fixed the problem.
Similar to your solution but found it's a fix found under "HELP" menu and not Add/Remove.
Thank you. -
When I try to install the latest version (10.5) of iTunes, the following message appears: "There was a problem with this Windows Installer package. A program running during installation is terminated unexpectedly." Is there somebody who can help me?thanks
I used this site and it fixed my problems. Hoping it will help with yours too
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Maybe you are looking for
-
I have loaded my shuffle 3 times. 750 songs, 150 songs and 100 songs. When I use my shuffle it only plays the last 100 songs in the shuffle. My ipod shows that I have the 1,000 songs in the ipod. How do I get the entire library of songs in the "shuff
-
I canu00B4t post a document after upgrade to 4.70
Hi experts: I don´t know the reason but when i try to post a document for example in f-43 transaccion after I introduce the Posting key for the next line item and de Account for the next position of the document and press ENTER and error occurs: If y
-
My iMovie keeps crashing and will not fully load. What do you think is the problem?
What would be the reason why my iMovie keeps crashing and will not fully load?
-
Dive into BC4J related --REF CURSOR
I read through the article (Dive into BC4J )and generated several questions: 1)If I have to execute a ref cursor: private static final String SQL = "begin ? := RefCursor.getSomthing(?, ?);end;"; Now I need to pass two parameters to the stored procedu
-
Paramaterized Query for In Clause Query
I am writing a saved query where I want to use parameters for an In Clause in the Where Clause where there could be anywhere from 1 to a dozen or so items in the In Clause. What is the best way of doing this? Should I just define multiple parameters