There was a problem loading the application

I find that I can log into iCloud with no problem but after, that every time I try to open an app I get the message
"there was a problem loading the application"
I'm using Safari 7.0.5
This has been going on for quite some time and during that period I've read many threads and followed various trouble shooting guides but I can't solve it. I really would appreciate any suggestions that you might care to offer.

Downloading Safari 5.1.7 will work, or at least that's how I now access iCloud and run the Apps. IE9 64-bit will also work. On my system it appears that IE9 32-bit has a problem with iCloud due to Norton Internet Security. When Norton's "Browser Protection" is disabled, IE9 32-bit works for me.
With Safari, I set its Homepage to iCloud so I'd have a direct link to the iCloud website.

Similar Messages

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

When I try to open contacts from the icloud control panel on my windows 7 PC, I get an error message: can't load contacts. There was a problem loading the application.

HT204053 Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is

Hi all, I am constantly running into problems opening iCloud services (mail, calendars, iWork's, etc.). I get a message stating i.e. Can't load Mail (Calendar, iWork), There was a problem loading the application. Does anybody know what a heck is going on?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

TS3376 I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved

I was able to use the findmyiphone app last week, but now I have been getting an error message "Can't load findmyiphone. There was a problem loading the application." please help as we are trying to locate an ipod with pics of a no deceased loved one.

Had the same problem and the same message -- was suddenly unable to access icloud apps on my pc, also using Windows 7 and Internet Explorer. After several days of pulling my hair out, decided to try a different browser and was able to get in by using Firefox instead of Internet Explorer. Hope this helps.

HT1338 I can;t open my iCloud account, the message I get is: there was a problem loading the application

Hi, After login into my iCliud account and click on any of the application to open, this is the message I get: there was a problem loading the application.
please kindly help.
John Awe

. nice one.. it only because my date was wrong.. thank you so much for the links.

ICloud on an iMac is unable to load mail. Message " Can't load mail. There was a problem loading the application. )

I can not access my mail on my desktop. The problem is persistant and the only message I get is " Can't load mail. There was a problem loading the application. )

Can't Load Mail - There was a problem loading the application

I can't access mail on iCloud after signing, and get this error message:
Can't Load Mail
There was a problem loading the application
I can see that there are five emails waiting for me.
Any thoughts on what's going wrong, please?

Open System Preferences > iCloud
Deselect the box next to Mail then reselect it.
Then try accessing your mail.
It may take a minute or two for iCloud to re sync the data.

When i go to the icloud page and click find my phone, i get a box that says "can't load find my iphone. There was a problem loading the application". What do I do now? Thank you

When i go to the Icloud page and i click on find my Iphone, I get a message that says "Can't load Find my Iphone. There was a problem loading the application." What do I do now. Thank you

Mail has been down all morning. Pacific time. California here.
Since 7am PST - it's 11:36 am right now. still down.
It's a routine maintenance issue I was told. - but very frustrating not to know ahead of time.

A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.

Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.

As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve

PPoint OWA there was a problem verifying the certificate

Hi, I installed Lync 2013 FE, edge and ARR. Recently, with your help, I finally made it work for web based meetings. People have A/V/Whiteboard/ but they are unable to use Share screens and PPoint.
I read that I need Office Web Application Server in order to make PPoint work so I followed online tutorial and installed it. As a certificate I at first used self signed but later as I added owa as SAN, I exported it from edge server and imported it in
OWA Server. I am not sure if this is the way to do that.
Error for share screen is that it is due to the network issues,
Error for PPoint is "There was a problem verifying the certificate". Remote user use web browser in order to access meeting, upload the file without any problem, and it says Loading ..... , on the other side I have domain machine with lync client
that receives notification to accept meeting content, after which error appears.
Any ideas?

Hi all and thanks for your reply.
I used this command to create farm (didn't define internal fqdn)
New-OfficeWebAppsFarm -ExternalURL https://lynweb.domain.com -CertificateName "ExternalCert"
Everything went smoothly, I can access
https://owa.domain.local/hosting/discovery (but cert is shown as unsecured since url is not the same as in cert (Lyncweb.domain.com).
Because I have split DNS, in my DNS I created lyncweb for the domain.com CNAME entry and I can successfully open https://lyncweb.domain.com/hosting/discovery form LAN.
I found several mistakes in my config (at least I think so):
1. In LyncFE I had under discoveryURL domain.local path, so this is why cert error was showing. It was able to access but because of the different URLs name that didn't match certificate name, I was getting an ssl error. - I changed it to lyncweb.domain.com/.....
2. I didn't have external DNS name for lyncweb.domain.com. In fiddler I saw that it is trying to access to this URL and since it wasn't defined- therefor not able to access. - I created A host record.
3. Firewall, since lyncweb was defined in ARR I needed to craete FW rule to let access OWA Server. - I added FW rule.
Current situation is this:
-- When I access through meeting.domain.com/Lync Client and start PPoint, on the remote client (teleworker where I started PPoint) presentation pops up on teleworker, I can go through the slides, but inside the LAN (second participant) on Lync Client or
via meet.domain.com I am just getting "Loading ...." and nothing appears. (I tried disabling Firewall but didn't help - so it is not about firewall, especially since OWA and LyncCLient are in the same subnet)
-- On the other hand when teleworker starts presentation and guest joins (both outside LAN), both can see presentation.
I thought that it is because I didn't have internal URL, so I added
-InternalURL: https://lyncweb.domain.com
Now I have both internal and external URL that is the same. But it didn't change the situation.
Any suggestions?

Windows 8.1 & office home business 2012 - Locks out ALL office programs * There was a problem sending the command to the program*

Hello,
I'm at wits end...BRAND NEW HP pavilion preloaded wit windows 8.1. Purchased a separate full version of Office 2012 Home and Business...downloaded it..loaded ...ran it....it runs fine ..UNTIL maintenance or other updates come through....then I receive
a ** * There was a problem sending the command to the program**** and it lock out ALL office programs with the same message.
My only fix has been to recover to a date BEFORE the updates or maintenance..and this works..UNTIL the updates or maintenance install....then it's Groundhog day all over again.
I have tried all the suggested fixes I have found..NONE work..NONE!! And pray tell how you can get into advanced options or any other portion of the programs to turn off the DDE when you cant access the programs or initialize them at all!!!??
SOS!!

Hi,
I have definitely heard your frustration, we can try these steps to check if it works.
Note: Before doing the following steps, please make a backup of your registry first.
1. edit "HKEY_CLASSES_ROOT\Word.Document.12\shell\Open " and delete the "ddeexec" key. The "ddeexec" key can also be deleted from "HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open".
2. Change the registry for Word 2013 by right-clicking and saving:
Windows Registry Editor Version 5.00 [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.Document.12\shell\Open\ddeexec\Topic]
@="System" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec] @="[REM _DDE_Direct][FileOpen(\"%1\")]" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Application] @="WordView" [-HKEY_CLASSES_ROOT\Word.DocumentMacroEnabled.12\shell\Open\ddeexec\Topic]
@="System"
3. Double-click the file after downloading to update the registry.
For more detail information:
http://www.dilloway.co.uk/there-was-a-problem-sending-the-command.html

When i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program

when i click on an excel or word file in 2007 the program begins to open but then an error message says There was a problem sending the command to the program.
i am using office2007 with windows7 premium home edition. i have checked file associations., all DDE settings. i have even tried this in safe mode. the same thing happens. please note once i see the error. i can then go back to the file click on
it a second time and it WILL open. AND i can open any file if i open excel and and find the file from there. i uninstalled and re-installed office 2007 from scratch. And i checked the compatibility mode (all un-checked) still the problem persisits. this is
a real PITA. anyone have any solution for this? Thanks
ken yanow

Hi,
Have you try to un-select the Ignore other applications that use Dynamic Data Exchange (DDE) setting?
Click the Microsoft Office Button, and then click Excel Options.
Click Advanced, and then click to clear the Ignore other applications that use Dynamic Data Exchange (DDE)
check box in the General area.
Click OK.
If the problem cannot resolve, the Run as administrator may selected.
Go to Office default install location: C:\Program Files\Microsoft Office\Office12.
Right-click EXCEL.EXE > Properties >
Compatibility tab.
Under Privilege Level, uncheck Run this program as an administrator
check box.
Best regards.
William Zhou
TechNet Community Support

In AOL email, checking individual messages in the regular system results in this error message: There was an error loading the message. Please try again later.

In accessing AOL email through the full version, I can navigate within my account (old mail, new mail, spam, etc.) fine, but when I try to open an individual email, I get this error message: "There was an error loading the message. Please try again later."
This is identical to a problem someone else was describing in another thread....unfortunately, nothing you suggested to him seemed to be working. I WAS tricked into opening a file attached to an email immediately before this started, so I think its a virus or something. ANYWAY....I AM able to open the messages when I use AOL's basic version. Initially, the problem seemed only to be in Firefox, but I've tried with Internet Explorer now also, and its the same thing, and the basic version is accessible while the full version is still blocked.
On both browsers, following the error message, I can't even click on the individual messages to TRY to open a different one, and there are some not-quite-right boxes and x's and things that appear on the screen that don't belong.
PLEASE tell me you can't make this go away....I've already tried uninstalling and reinstalling Firefox....that didn't work. I've also fun McAffee, and that didn't change anything.

You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

The icon for firefox is not working. "There was a problem sending the command to the program" pops up. Cannot get in to firefox

Since the upgrade, the icon does not work. Now this message comes up. I made Google my home page by following directions on this site. I deleted the old icon as it didnt work, and this new one came up on my desktop and it presented the message above.

Hi,
Before you open any of the applications, please go to Task Manager to see if their processes are stuck there. If so, shut them down and try again.
You can also try starting the applications in Safe Mode to determine if the problem is 3rd-party add-ins related.
Please refer to this article below to learn more:
http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
As for the Excel problem 'There was a problem sending the command to the program', please note when double-clicking an Excel workbook, a
dynamic data exchange (DDE) message is sent to Excel, instructing it to open the workbook that you double-clicked. If you
turn on the "Ignore other applications that use Dynamic Data Exchange (DDE)“ setting,
the DDE message sent to Excel by Windows Explorer is ignored, and Excel does not open the workbook that you double-clicked.
To automatically solve this issue , we recommend to run “Microsoft Fix it 20074” and follow the steps in the wizard:
http://support.microsoft.com/kb/211494/en-us
You can also try to fix it manually by the steps under 'Let me fix it myself'.
If the steps above don't help, we can try to repair Office from Control Panel -> Programs and Features to check the result.
Regards,
Melon Chen
TechNet Community Support

There was a problem loading the application

Similar Messages

Maybe you are looking for