"There was a problem logging in"

3 days ago, the Reader stopped accepting my log in and presented the error notice "There was a problem loggin in". I successfully reset the password, and I still receive the error. I reloaded Adobe Reader XI, to no avail. On the Adobe site, I can log in to my account no problem, but cannot gain access on the Reader. I run Windows 8 - would appreciate help from here.

Which service are you logging into?
CreatePDF? http://forums.adobe.com/community/createpdf
or
Export PDF? http://forums.adobe.com/community/exportpdf

Similar Messages

Error: There was a problem logging on to SAP BusinessObjects Enterprise

I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
   Unable to Logon
     There was a problem logging on to SAP BusinessObjects Enterprise.
       Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
       persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.

Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent.

Tumblr won't log in... keeps saying "There was a problem logging in, try again later"

but days have passed and still no improvement...how long does it think I should wail?
Tumblr logs in fine on PC but not on BB Torch after one initial successful login and logout. I enter my username and password to not avail, but on PC it is fine. Haven't encountered this with any other app. Can it not be solved?
Solved!
Go to Solution.

All sorted, installed Tumblr Launcher from appworld, changed password and all now works fine although I'm loathe to log out.

Cannot place order ERROR: "There was a problem adding your product to cart"

Hey guys,
Well, once again Best Buy's online system is preventing me from making an order. It seems like nearly every time I log in I experience some new problem. This time, I'm unable to add anything to my cart. It doesn't matter what item I try to add to my cart or what browser I use or if I clear cookies...it happens every time, on every browser, with every product in the store. The error shows a red & white triangle with a message "There was a problem adding your product to cart".
Just to clarify ahead of time: 1) I have already tried signing in using 4 different browsers (explorer, firefox, chrome, opera) & they all give the same error; 2) Prior to posting here I researched this problem & found out it is somewhat common & has been occurring since at least 2012 on BestBuy.com; 3) Every time someone posts in here about this problem, customer service offers the same "fix" every time - to sign out, clear their browser cache of cookies, shut down the browser, restart the browser, sign back in, etc.... The only problem is, this "solution" has not worked ONE time our of the many times this problem has cropped up in here over the past 3+ years. Why this "solution" keeps getting told to people even though it never works is beyond me. But, there you have it.
Just to clarify: I have already tried this solution, And just like with everyone else before me, it didn't work for me either. So, what's the next step? There must be something else that can be done other than waiting a couple more days for it to magically fix itself (it seems that is the only thing that ever "works"...is to let several days go by and the problem ends up getting fixed in some back-end server-side patch up).
What I'm hoping for from you is a solution that can fix this immediately. This problem has already prevented me from making a couple purchases for items that were temporarily on sale over the past couple days. So, those are lost sales for Best Buy. What I'm hoping to do now is pre-order the Elder Scrolls Online (PS4) in order to take advantage of the $10 pre-order reward. The game releases on Tuesday the 9th. So, in order to get this done in time I need to place the order sometime today (on the 8th).
With all these repeated technical problems making purchasing a chore & wasting my time every single time I want to buy a product it's almost as if Best Buy is telling customers "We don't care if our online system works reliably...go spend your money at Amazon instead". lol
Thank you in advance for your timely help on this matter.
-Marc (removed per forum guidelines)

Hello mjswooosh,
I'm very disheartened to hear that you've had ongoing problems when attempting to order from BestBuy.com. Our goal is ever to provide a fun and efficient shopping environment! Certainly creating aggravation serves neither you nor us and I apologize sincerely for this having been your experience.
We recommend the troubleshooting steps you mentioned (i.e., clearing the browser cache, deleting temporary internet files and cookies) because this is the most common cause of this type of problem. I too have encountered this issue from time to time and these steps have almost always resolved the problem. I say almost always because there's one further step you can try: ensure that you have signed out of BestBuy.com, then perform the browser maintenance steps we've recommended. Afterward, before signing in to BestBuy.com, add your desired items to your cart and sign in as part of the checkout process. When the standard steps have not netted a resolution for me, this has solved the problem each time.
I hope this helps. I'm very grateful that you took the time to write to us with your concerns and for sharing your very valuable feedback about your online experience.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

I have Firefox 5 now, in the admin section of my web site when I edit a change in the data it does not make the change on my data file. There was no problem in my previous version.

How can I return to a previous version that did not have problem? On Safari on my lap top Mac, I do not have this problem. We tried this on another Windows computer with a 3.5 or 3.6 Firefox version and there was no problem.

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site. Note: this is likely to log you out, so finish up whatever you are working on first.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete the site's cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
Some sites appear to be incompatible with Firefox 5. The difficulty is tracking down the problem. To see whether it is caused by the new stricter HTML parser in Firefox 4+, you can turn that off. Please save any unfinished work first.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''html5''' and pause while the list is filtered
(3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
Then return to the problem page, reload and try again. Does that make any difference?
Here's the process to roll back if needed:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.

Office Web Apps 2013 - Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word

Hello
I had configured Office Web Apps for SharePoint 2013 which was working fine for about 2 months until this morning.
The error message I get for WORD, PDF and Excel files is:
The ULS logs on the WFE give me this:
WOPI (CheckFile) Proof Data: AccessToken Hash '1572676699' [1054 bytes], URL
01/08/2014 11:01:58.01*   w3wp.exe (0x1368)                          0x09B4   SharePoint Foundation
    WOPI                             afk59   Monitorable
WOPI                             agxqc   Medium     WOPI Signature verification
attempt failed with public key 01/08/2014
11:01:58.01    w3wp.exe (0x1368)                          0x09B4   SharePoint Foundation
    WOPI                             agxqc   Medium     WOPI
Signature verification attempt failed with public key
01/08/2014 11:01:58.01    w3wp.exe (0x1368)                          0x09B4   SharePoint Foundation
    WOPI                             agxqb   Medium     WOPI
Signature verification attempt failed - no public key   e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01    w3wp.exe (0x1368)                          0x09B4   SharePoint Foundation
    WOPI                             ahdzz   Monitorable   WOPI
Proof: All WOPI Signature verification attempts failed   e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01    w3wp.exe (0x1368)                          0x09B4   SharePoint Foundation
    WOPI                             ag7pj   Unexpected   WOPI
(CheckFile) - Invalid Proof Signature for file Letterhead Template.docx url: http://site.contoso.com/_vti_bin/wopi.ashx/files/9c5d0d7077aa43e9a9538c02deb57580?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOi
The ULS Logs on my Office Web Apps server gives me this:
Error message from host: Verifying signature failed, host correlation:    d197d187-ef9d-42f6-ae4f-c4b8199c1078
WOPICheckFile,WACSERVER FileNotFound
WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.FileUnknownException: WOPI 404
Any idea what may have caused this issue all of a sudden?
Thank you.
Yoshi

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yeste

Hi, I cant login to the facebook app on my iphone 5 ios 6.0.2. I keep getting an error message saying 'There was an error logging in using single sign on' when im asked to log in again i get a 'session expired' message. This only started happening yesterday. Anyone else having this problem? Thanks.

I am having the same problem and took the following steps to mitigate it to no avail.
1. I deleted the Facebook app on the phone and turned off Facebook in the iPhone's system-wide settings.
2. I re-enabled Facebook in the iPhone's system-wide settings and reinstalled the Facebook app and logged in again. It worked. For about an hour.
3. I completely restored the phone to a previous backup (before the problems started) and reenabled Facebook .... reinstalled the app.... and now it works intermittenly. But it hasn't worked in about 12 hours now (just tried a few minutes ago).
Please advise.

There was a problem connecting to the server (...)

Hello, all. First time posting here, so I'd like to greet the community.
I've been having this small problem for some months and never managed to fix it. I've searched the forums countless times and found many discussions related to the same message, but with different causes and solutions. None of them applied to my case.
Every time I open Mail preferences, my system freezes for a few seconds and a message pops up stating "There was a problem connecting to the server (...)":
I believe this has to do with the fact that, when I first bought my MacBook, I added a custom sound on the New Messages Sound preference that was stored on a hard-drive connected to my home network. Eventualy, I did copy said sound file to my MacBook and selected it as my custom sound for new mails, removing the previous one from my list of custom sounds. Still, once I disconected this hard-drive from my home network, I started receiving the mentioned message. It must still be searching for the sound file that was stored on the server, regardless of the fact that it's no longer selected as my new messages sound or added as a custom sound.
What's annoying about this is the fact that, ever since then, every time I receive a new email, the sound plays long after the notification alert pops up. Not really a serious issue, but I'd like to know how to solve it.
Many thanks in advance!

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

There was a problem connecting to the server "10.0.1.30"

In the last couple of days I have started getting the error "There was a problem connecting to the server “10.0.1.30”" popping up on the screen. Nothing to my knowledge has changed and I have no devices on my LAN that have an IP address in this range. All devices IP addresses are 192.168.20.1xx and my router's IP address is "10.106.75.57", subset mask "255.255.255.255", gateway "10.106.75.57", DNS "10.5.80.241 , 10.5.68.232" (Router is NetComm NF2 with attached AirCard 320U USB 3G/4G modem).
A couple of weeks ago I switch from using a Sierra (NetGear) Aircard 760S Hotspot Modem (default IP address of 10.0.0.138) using the AirCard Hub wireless router (IP address 10.0.1.1) to the NetComm router AirCard modem combination.
If I Ping "10.0.1.30" the results are as follows:
"PING 10.0.1.30 (10.0.1.30): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
60 bytes from 10.5.70.11: Communication prohibited by filter
Vr HL TOS Len   ID Flg off TTL Pro cks      Src      Dst
4 5 28 5400 caf4   0 0000 3e 01 d159 192.168.20.109 10.0.1.30 "
This error message is annoying, but apart from that everything appears to be working just fine. Is there a way of tracking down what is attempting to call 'server"10.0.1.30"' and stoping it. I.E. is there a quick and simple fix?
Hardware Overview:Model Name: MacBook Pro
Model Identifier: MacBookPro8,3
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
System Version: OS X 10.9.4 (13E28)

There are many possible causes for this issue, and it may be hard to resolve. Please take each of the following steps that you haven't already tried. Back up all data before making any changes.
Step 1
If you get the alert as soon as you log in, it's probably caused by one of your login items or by software that otherwise loads at startup or login. Ask if you need help identifying it. A known offender is "AdobeResourceSynchronizer," which is a component of some Adobe products. See also this discussion.
If you get the alert in the login screen before you log in, stop here and ask for instructions.
Step 2
If there's an icon representing the server in the sidebar of a Finder window, hold down the command key and drag it out.
Step 3
In the Finder, press the key combination command-K or select
          Go ▹ Go to Server...
from the menu bar. In the upper right corner of the window that opens is a Recent Servers popup menu represented by a clock icon. From that menu, select
          Clear Recent Servers…
and confirm. Test.
Step 4
Open the Printers & Scanners pane in System Preferences and delete any network devices you no longer use.
Step 5
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing command-C:
~/Library/PDF Services
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. A folder may open. If it does, move the contents to the Desktop, or to a new folder on the Desktop. Log out and log back in. Test. If there's no change, put the items you moved back where they were and continue.
Step 6
Open the folder
~/Library/Preferences
as in Step 5 and move the file named "loginwindow.plist" items in that folder to the Trash, if it exists (it may not.)
Log out and back in again, and test.
Step 7
Other possible causes are references in the iPhoto, iTunes, or iMovie library pointing to the server, and bookmarks in the Preview application.
Try rebuilding the iPhoto library.
Step 8
Triple-click the line below to select it:
/System/Library/CoreServices/Directory Utility.app
Rght-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* The application Directory Utility will open.
In the Directory Utility window, select the Directory Editor tool in the toolbar. Select Mounts from the Viewing menu in the toolbar, and /Local/Default from the node menu, if not already selected. On the right is a list of names and values. By default, the list is empty. If it's not empty, post a screenshot of the window and stop here.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.
Step 9
Open the following file as you did in the last step:
/etc/auto_master
It will open in a TextEdit window. The contents should be exactly this:
# Automounter master map
+auto_master          # Use directory service
/net               -hosts          -nobrowse,hidefromfinder,nosuid
/home               auto_home     -nobrowse,hidefromfinder
/Network/Servers     -fstab
/-               -static
If there are any other lines in the window, post them. Otherwise, close the window.

There was a problem connecting to the server error

HELP!
Right, so I upgraded to Lion on my MacBook Pro last night, and have spasmodically gotten the following error:
There was a problem connecting to the server "me409fs02"
followed by:
There was a problem connecting to server "me35syd08"
Now the weird thing is, me409fs02 and me35syd08 were servers at a company I used to work for 2 years ago. I have no idea why my computer is suddenly trying to log in to these old servers, or how to make it stop.
Here's a screen shot of what's going on in the console at the exact moment that the errors occur:
This is turning out to be a gargantuan pain in the butt and I'd really appreciate any help I can get.
Thanks in advance,
Brent.

G'day mate,
Is this only happening in one user account? If so, then you should look into the library folder of your user account and your login items (through "Users & Groups Preferences").
Check for any LaunchAgents or LaunchDaemons that could be attempting to connect to the server.
If it's happening for every user, then also check the Library folder at the root of your hard drive (LaunchAgents, LaunchDaemons and StartupItems).
Cheers,
Rodney

There was a problem downloading song. The file seems to be corrupted.

Hi
I'm trying to download an album i purchased but i'm constantly getting the message "There was a problem downloading X. The file seems to be corrupted" for every song I try to download. Also if i try to stream the song it says "This computer is not authorized to play X. Would you like to authorize it". But my computer is already authorized and when I try to authorize it again, it says this computer is already authorized.
I've tried downloading them through the purchased section of the store (which causes itunes to crash 50% of the time) with no luck. I've also reinstalled itunes. This only started happening once I installed the latest version of itunes.
Any help would be appreciated

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

There was a problem connecting to the server message

I have started to get the following message when I run Final Cut Pro X There was a problem connecting to the server “soundmedia”
The “sound media” server is a PC running windows XP and is switched off.
I closed all libraries & set up a new library - with nothing in it. There was a problem connecting to the server “soundmedia” still appears. when "ok" is clicked the message clears then reappears 10-15 sec later.
I have tried the following:
Cleared recent servers in Finder ie
Finder, Go, Connect to Server, then Click on the little clock in “connect to server window” then click clear recent servers.
Deleted FCPX preferences by:
press and hold Option + Cmd while launching FCP X from the Dock. A dialog appears asking if you want to trash Final Cut’s preference files. Clicked Delete
Deleted all FCPX entries in OS X/ Library/Preferences & deleted all entries in Trash before reloading FCPX
Repaired permissions on system disc
Created a new user. “There was a problem connecting to the server “soundmedia” has not reappear on the new user.
If I switch on the soundmedia server & click “ok” the message disappears (when I am logged in
to my original account.)
I am the only user on this iMac, something must be wrong with my user account. Any ideas
what it might be? Has anyone got a software patch that can be loaded to prevent the message
from constantly reappearing? Once acknowledged it surely shouldn’t keep reappearing.
It is a nuisance and a waste of energy having to have a server which is not required powered
up just so the message does not reappear.

I understand you are getting unable to connect to server error message on your printer. I would first unplug router and printer for about 1 minute. I would plug router up first then printer. I would then try to enable web services. If not successful and you get same error message. I would follow these steps.
1. Obtain your printer's IP address
a. This can be done by pressing the wireless icon on printer.
2. Enter the printer's IP address in a browser.
3. Select the network tab at the top of the page.
4. On the left select networking.
5. Select Network Address (IP)
6. Select Manual DNS Server
a. Manual Preferred DNS should read 8.8.8.8
b. Alternate DNS Server should read. 8.8.4.4
7. Select apply you might get a warning just select okay.

There was a problem connecting to the server "Time Capsule". The share does not exist on the server. Please check the share name, and then try again.

The following error pop's up as an [OK] dialogue box after logging in the iMac,
There was a problem connecting to the server "Time Capsule".
The share does not exist on the server. Please check the share name, and then try again."
As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
Any suggestions on how begin to work out how to achieve networking seamlesness?

First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
 ▹ System Preferences ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

There was a problem connecting to the server "my_iMac" whenever I open Mail in Lion.

Everytime I open my mail program on my new MacBook Pro (running 10.7.5) I get the error "There was a problem connecting to the server "my_iMac (running 10.5.8)" The server may not exist or it is unavailable". I've read other posts that talk about resetting the sync server but that appears to be for folks who get the message as soon as they boot up their computer. This problem appears to be specific to Mail. I was once file sharing between my MacBook and iMac (which royally screwed up permissions on my iMac, a problem that took me a week to figure out) and I thought the MacBook got off without a scratch until I started noticing this problem. Every Time I Open My Mail Program. Any tips? Why is my Mail program continually looking for my old Mac?
Thanks in advance!
p.s. never used Time Machine... never even opened it.

I recently upgraded to Mountain Lion from Lion, and after turning on our old G5 running 10.5.8, the Mountain Lion iMac keeps saying it can't connect to the server (G5) when the G5 is off. I can't get it to stop. I can't tell if it's related to Mail or any other specific app for sure.
I've tried turning the G5 on, connecting to it, and then disconnecting in hopes that the system would realize that the relationship was amicably terminated, but it keeps trying to log on anyway.
What could be going on?

Exchange setup error: "There was a problem accessing the registry on this computer"

Hi,
i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
Error:
There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
I dont know what more to do, any help will be appreciated.
Thanks

No, firewall is disabled.
Setup Logs says:
10:50:04.890: Starting Collecting Data phase.
10:50:04.921: No mapping between account names and security IDs was done
10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
10:50:06.093: Completed Collecting Data phase.
10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
10:50:06.171: Starting Postprocessing Rules phase.
10:50:06.187: Completed Postprocessing Rules phase.
Thanks for your help!

"There was a problem logging in"

Similar Messages

Maybe you are looking for